Development and prospect of green and low carbon ironmaking technologies in Shougang
ZHANG Fu-ming1,2
1. Chief Engineer Office, Shougang Group Co. , Ltd. , Beijing 100041, China; 2. The Research Center of Engineering Technology of Three Dimensions Simulating Design of Beijing, Beijing 100043, China
Abstract：Since the beginning of the new century,Shougang has carried out relocation adjustment and structural optimization. According to the engineering philosophy of new generation recyclable green and low carbon of iron and steel manufacturing process,two modern iron and steel manufacturing enterprises,Shougang Stock Company and Shougang Jingtang Company,have been built in Tangshan region,Hebei province. The green and low carbon developing the concept of ironmaking technology in Shougang was expounded,the developing approaches and objectives,and summarizes the progress and innovation achievements of the ironmaking technology of Shougang in recent years was proposed. The research and application effects of steam spraying on sintering bed surface technology,composite pelletizing preparation technology,high ratio pellet burden blast furnace operating technology,comprehensive treatment,and deep purification technology of metallurgical flue gas are discussed in detail. Facing the future,combined with the development status of Shougang ironmaking technology as well as the green and low carbon development goal,the development trend of Shougang ironmaking technology is discussed and prospected.
张福明. 首钢绿色低碳炼铁技术的发展与展望[J]. 钢铁, 2020, 55(8): 11-18.
ZHANG Fu-ming. Development and prospect of green and low carbon ironmaking technologies in Shougang[J]. Iron and Steel, 2020, 55(8): 11-18.
[1] ZHANG Fu-ming,ZHAO Min-ge,CAO Chao-zhen. New technological progress of ironmaking in shougang[C]//Proceedings of the Iron and Steel Technology Conference 2017. Nashville:AISTech,2017:439. [2] 沈峰满,姜鑫,高强健,等. 高炉炉渣适宜镁铝比的理论基础[J]. 炼铁,2019,38(2):17. (SHEN Feng-man,JIANG Xin,GAO Qiang-jian,et al. Theoretical basis of suitable MgO/Al2O3 ratio in BF slag[J]. Ironmaking,2019,38(2):17.) [3] 姜鑫,沈峰满,韩宏松,等. 高炉渣适宜镁铝比分段管控的分析与应用[J]. 钢铁,2019,54(10):12. (JIANG Xin,SHEN Feng-man,HAN Hong-song,et al. Analysis and application of sectional control of w(MgO)/w(Al2O3) in blast furnace slag[J]. Iron and Steel,2019,54(10): 12.) [4] 程峥明,裴元东,刘伯洋,等. 首钢京唐低硅低镁烧结技术的研究与应用[J]. 中国冶金,2017,21(11):41. (CHENG Zheng-ming,PEI Yuan-dong,LIU Bo-yang,et al. Research and application of low silicon and low magnesium sintering technology in Shougang Jingtang[J]. China Metallurgy,2017,21(11):41.) [5] 王冬青,马泽军,陈辉,等. 首钢A高炉炉渣降低MgO的热力学分析[J]. 中国冶金,2018,28(10):5.(WANG Dong-qing,MA Ze-jun,CHEN Hui,et al. Thermodynamic analysis of reducing MgO content in slag for blast furnace A in Shougang[J]. China Metallurgy,2018,28(10):5.) [6] 任立军. 京唐5 500 m3高炉降低(MgO)生产实践[J]. 炼铁,2018,37(1):20. (REN Li-jun. Production practice of reducing (MgO) in Jingtang′s 5 500 m3 blast furnace[J]. Ironmaking,2018,37(1):20.) [7] ZHANG Fu-ming,WANG Qu-sheng,HAN Zhi-guo. Innovation and application on pelletizing technology of large traveling grate induration machine[C]//Proceedings of the Iron and Steel Technology Conference 2015. Cleaveland:AISTech,2015:402. [8] 青格勒,吴铿,屈俊杰,等. 不同含镁添加剂对球团矿工艺参数及质量的影响[J]. 钢铁,2013,48(7):17. (QING Ge-le,WU Keng,QU Jun-jie,et al. Effect of different magnesium additives on process paramerters and pellet quality[J]. Iron and Steel,2013,48(7):17.) [9] 青格勒,王朝东,侯恩俭,等. 低硅含镁球团矿抗压强度及冶金性能[J]. 钢铁研究学报,2014,26(4):7.(QING Ge-le,WANG Chao-dong HOU En-jian,et al. Compressive strength and metallurgical property of low silicon magnesium pellet[J].Journal of Iron and Steel Research,2014,26(4):7.) [10] 裴元东,欧书海,马怀营,等. 烧结料面喷吹蒸汽对烧结矿质量和CO排放影响研究[J]. 烧结球团,2018,43(1):35.(PEI Yuan-dong,OU Shu-hai,MA Huai-ying,et al. Effect of steam spraying on sintering bed on sinter quality and CO emission[J]. Sintering and Pelletizing,2018,43(1):35.) [11] 裴元东,史凤奎,吴胜利,等. 烧结料面喷吹蒸汽提高燃料燃烧效率研究[J]. 烧结球团,2016,41(6):16. (PEI Yuan-dong,SHI Feng-kui,WU Sheng-li,et al. Study on improving fuel combustion efficiency by steam spraying on sintering bed[J]. Sintering and Pelletizing,2016,41(6):16.) [12] 田筠清,青格勒,刘长江,等. 使用石灰石生产低硅碱性球团矿试验[J]. 中国冶金,2018,28(4):13. (TIAN Yun-qing,QING Ge-le,LIU Chang-jiang,et al. Prodution expriment of low silica alkaline pellet by limestone[J]. China Metallurgy,2018,28(4):13.) [13] 环境保护部,国家质量监督检验检疫总局. GB 28662—2012钢铁烧结、球团工业大气污染物排放标准[S]. 北京:中国环境科学出版社,2012. (Ministry of Environmental Protection,General Administration of Quality Supervision,Inspection and Quarantine of the Pepole′s Republic of China. GB 28662—2012 Emission Standard of Air Pollutants for Sintering and Pelletizing of Iron and Steel Industry[S]. Beijing:China Environmental Science Press,2012.) [14] 河北省环境保护厅,河北省质量技术监督局. DB 13/2169—2015 钢铁工业大气污染物排放标准[S]. 石家庄:河北省环境保护厅,2015. (Environmental Protection Bureau of Hebei Province,Quality and Technical Supervision Bureau of Hebei Province. DB 13/2169—2015 Emission Standard of Air Pollutants for Iron and Steel Industry[S].Shijiazhuang:Environmental Protection Bureau of Hebei Province,2015.) [15] 河北省环境保护厅,河北省质量技术监督局. DB 13/2169—2018 钢铁工业大气污染物超低排放标准[S]. 石家庄:河北省环境保护厅,2018. (Environmental Protection Bureau of Hebei Province,Quality and Technical Supervision Bureau of Hebei Province. DB 13/2169—2018 Ultra-Low Emission Standard of Air Pollutants for Iron and Steel Industry[S]. Shijiazhuang:Environmental Protection Bureau of Hebei Province,2018.) [16] 王代军. 首钢京唐球团烟气治理研究与应用[C]//中国环境科学学会. 中国环境科学学会学术年会论文集(2017). 厦门:中国环境科学学会,2017:1329.(WANG Dai-jun. Research and application of emission control of Shougang Jingtang pellet plant[C]//Chinese Society of Environmental Sciences. Proceedings of the Conference of the Chinese Society of Environmental Sciences(2017). Xiamen:Chinese Society of Environmental Sciences,2017:1329.)
2020, Vol. 55 
