Overseas research advances in evaluation methods of high-temperature fundamental sintering characteristics of iron ores
YANG Cong-cong1,2, ZHU De-qing1,2, PAN Jian1,2, GUO Zheng-qi1,2
1. School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, Hunan, China; 2. Low Carbon and Hydrogen Metallurgy Research Center (CSU-LCHMC), Central South University, Changsha 410083, Hunan, China
Abstract:Due to the increasing depletion of high-grade iron ore resources and the diminishing quality of iron ore sinter feeds, the steel mills at home and abroad are facing with problems that sintering raw material supply is unstable, iron ore property fluctuates greatly and raw material structure changes frequently, which has great adverse effect on sintering production, blast furnace smelting and product quality. Therefore, it's of great significance to conduct evaluations of fundamental sintering characteristics of iron ores. The basic properties of iron ores can be classified into two categories, i.e., cold and high-temperature characteristics. The former mainly includes the chemical composition, particle size distribution and mineralogical characteristics, etc., while the latter generally includes high-temperature mineralization behavior, such as assimilation, liquid phase formation characteristics of iron ores as well as the real sintering performance. This article mainly summarizes the overseas research advances in the evaluation of high-temperature fundamental sintering characteristics of iron ores. Meanwhile, the evaluation indexes and experimental methods proposed by various research institutions are summarized systematically. The previous studies show that, although the existing evaluation methods based on compact sintering provide deep insight into different sintering behavior of iron ores, it's still difficult to build accurate and reliable relationship with the real sintering performance. The main reason is that the key factors affecting the actual sintering performance of iron ore are not well understood, and the evaluation methods needs to be improved to simulate the real sintering conditions as much as possible. Therefore, to reveal the internal relations between fundamental sintering characteristics and its sintering performance of iron ore, the first premise is to develop deep understanding about the transfer law of the properties for materials derived from different operational stages, notably “iron ores-granules-sinter”. It is of great significance to find out the main factors influencing the iron ore sintering process, which can provide a proper breakthrough point for the evaluation of high-temperature fundamental sintering characteristics of iron ores.
杨聪聪, 朱德庆, 潘建, 郭正启. 铁矿石高温烧结基础特性评价方法的国外研究进展[J]. 钢铁, 2022, 57(5): 11-21.
YANG Cong-cong, ZHU De-qing, PAN Jian, GUO Zheng-qi. Overseas research advances in evaluation methods of high-temperature fundamental sintering characteristics of iron ores[J]. Iron and Steel, 2022, 57(5): 11-21.
[1] 姜涛.铁矿造块学[M].长沙:中南大学出版社, 2012. (JIANG Tao. Iron Ore Agglomeration[M]. Changsha: Central South University Press, 2012.) [2] World Steel Association. Steel Statistical Yearbook 2020 [M]. Brussels: World Steel Association Economics Committee, 2021. [3] 王新东, 李建新, 胡启晨. 基于高炉炉料结构优化的源头减排技术及应用[J]. 钢铁, 2019, 54(12): 104. (WANG Xin-dong, LI Jian-xin, HU Qi-chen. Application practice of source and process sulfur-nitrate reduction technology based on optimization of blast furnace charge structure[J]. Iron and Steel, 2019, 54(12): 104.) [4] 裴元东,鞍钢,熊军,等.近几年京唐烧结技术进步[C]// 第十届中国钢铁年会暨第六届宝钢学术年会论文集.北京:冶金工业出版社, 2015:138. (PEI Yuan-dong, AN Gang, XIONG Jun, et al. Recent progress in the sintering technology of Jingtang Steel[C]//Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biennial Academic Conference. Beijing:Metallurgical Industry Press, 2015:138.) [5] ZHU D Q, XUE Y X, PAN J, et al. An investigation into aluminum occurrence impact on SFCA formation and sinter matrix strength[J]. Journal of Materials Research and Technology, 2020, 9(5): 10223. [6] HAN H L, LU L M. Recent advances in sintering with high proportions of magnetite concentrates[J]. Mineral Processing and Extractive Metallurgy Review, 2018, 39 (4): 217. [7] 吴胜利,苏博,宋天凯,等.铁矿粉烧结优化配矿技术的研究进展[C]// 第十届中国钢铁年会暨第六届宝钢学术年会论文集.北京:冶金工业出版社, 2015:127. (WU Sheng-li, SU Bo, SONG Tian-kai, et al. Recent progress in the ore blending technology of iron ore sintering process[C]//Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biennial Academic Conference. Beijing:Metallurgical Industry Press, 2015:127.) [8] 范晓慧. 铁矿烧结优化配矿原理与技术[M].北京:冶金工业出版社,2013. (FAN Xiao-hui. Principle and Technology of Iron Ore Matching for Sintering[M]. Beijing: Metallurgical Industry Press, 2013.) [9] 深川弥二郎,川村稔,若山昌三,等.鉄鉱石の融点,濡れ性と燐結特性について[J].铁と鋼, 1965, 51: 1747. [10] Kasai E, Omori Y, Wu S L. Coalescing phenomenon of granules in iron ores sintering bed[C]//5th International Symposium on Agglomeration. Rugby: ICHEME, 1989: 71. [11] Kasai E, Wu S L, Omori Y. Factors governing the strength of agglomerated granules after sintering[J]. ISIJ International, 1991, 31(1): 17. [12] 葛西荣辉,吴胜利,大森康男.擬似粒子の合体現象に与える鉄鉱石性状の影響[J].铁と鋼, 1991, 77(1): 56. [13] Higuchi T, Lu L. Evaluation of sintering behavior based on ore characteristics [C]//The Australasian Institute of Mining and Metallurgy (AusIMM): Proceedings Iron Ore 2017.Perth,Australia:The Australasian Institute of Mining and Metallurgy, 2017: 303. [14] 肥田行博,野坂庸二. 西豪州における鉄鉱床と今後の鉱石性状[J].鐵と鋼, 1992, 78(7): 960. [15] 肥田行博,岡崎润,中村圭一,等.高ゲーサイト鉱石の自己緻密化焼結法[J]. 铁と鋼, 1992, 78(7): 1021. [16] 肥田行博,岡崎潤,伊藤薰,等.鉄鉱石のCaO との同化に及ぼす鉱石性状の影響[J].铁と鋼, 1992, 78(7): 1013. [17] Hida Y, Nosaka N. Evaluation of iron ore fines from the viewpoint of their metallurgical properties in the sintering process[J]. Mineral Processing and Extractive Metallurgy, 2007, 116(2): 101. [18] 岡崎潤,細古陽三.焼結鉱の気孔形成に及ぼす鉄鉱石鉱物特性の影響[J].铁と鋼, 2001, 87(5): 298. [19] Okazaki J, Higuchi K, Hosotani Y, et al. Influence of iron ore characteristics on penetrating behavior of melt into ore layer[J]. ISIJ International, 2003, 43(9): 1384. [20] 岡崎潤,細古陽三,中野正則.鉄鉱石細粒部の同化特性と焼結鉱強度との関係[J].铁と鋼, 2003, 89(2): 237. [21] Okazaki J, Higuchi K. Marra Mamba ore, its mineralogical properties and evaluation for utilization[J]. ISIJ International, 2005, 45(4): 427. [22] 岡崎潤,中野正則,斎藤元治.鉄鉱石粒子の分類およびそれらの鉱物特性と焼結性[J].铁と鋼, 2006, 92(12): 712. [23] Higuchi K, Okazaki J, Seiji N. Influence of melting characteristics of iron ores on strength of sintered ores[J]. ISIJ International, 2020, 60(4): 674. [24] Loo C E. Influence of a Pisolitic limonite on sintering of an Australian iron ore blend[J]. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 1991, 100: 127. [25] Loo C E.原料特性对烧结高温带反应的影响[J].烧结球团,1994, 19(3): 41.(Loo C E. Effect of ore properties on reactions at high-temperature zone during sintering[J].Sintering and Pelletizing, 1994, 19(3): 41.) [26] Loo C E. Sintering properties of Yandi ore[J]. Kang T'ieh/Iron and Steel, 1994, 29(2): 1. [27] Debrincat D, Loo C E, Hutchens M F. Effect of iron ore particle assimilation on sinter structure[J]. ISIJ International, 2004, 44(8): 1308. [28] Loo C E. A perspective of goethitic ore sintering fundamentals[J]. ISIJ International, 2005, 45(4): 436. [29] Lu L M, Higuchi T. Recent advances in evaluation of iron ore for the sintering process[C]//Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biennial Academic Conference. Beijing:Metallurgical Industry Press, 2015. [30] Li H, Pinson D J, Zulli P, et al. Interaction between mineral phases in a goethitic iron ore and fluxing materials during sintering[J]. Metallurgical and Materials Transactions B, 2021, 52(2), 996. [31] Clout J M F, Manuel J R. Fundamental investigations of differences in bonding mechanisms in iron ore sinter formed from magnetite concentrates and hematite ores[J]. Powder Technology, 2003, 103: 393. [32] Lu L M, Holmes R, Bruckard W J. CSIRO research and development for Australian iron ore industry[C]// 2011 CSM Annual Meeting Proceedings. Beijing:Metallurgical Industry Press, 2011:125. [33] Lu L M. Important iron ore characteristics and their impacts on sinter quality-a review[J]. Minerals and Metallurgical Processing, 2015, 32(2): 88. [34] Coasta E D, Coheur J P, Vanderheyden B. Slag formation in the adhering layer of granules and its reaction with nuclei in iron sintering[J]. ISIJ International, 1995, 35(2): 138. [35] Caporali L, Oliveira D, Ottoni R.铁矿石烧结反应性的概念[J].钢铁, 1999, 34(增刊): 111. (Caporali L, Oliveira D, Ottoni R. The concept of iron ore sintering reactivity[J]. Iron and Steel, 1999, 34(s): 111.) [36] YANG C C, ZHU D Q, PAN J, et al. Granulation effectiveness of iron ore sinter feeds: Effect of ore properties[J]. ISIJ International, 2018, 58(8): 1427. [37] YANG C C, ZHU D Q, PAN J, et al. Some basic properties of granules from ore blends containing ultrafine magnetite and hematite ores[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26 (8): 953. [38] Sato S, Kawaguchi T, Ichidate M, et al. Melting model for iron ore sintering[J]. Transactions ISIJ, 1986, 26(4): 282. [39] 佐藤駿,川口尊一,一伊達稔,等.鉄鉱石焼結鉱の気孔形成過程とそのモデル化[J].铁と鋼, 1987, 73(7): 804. [40] 佐藤駿,川口尊一,一伊達稔,等.鉄鉱石焼結鉱の鉱物形成とその構成予測モデル[J].铁と鋼, 1987, 73(8): 956. [41] 佐藤駿,川口尊一,一伊達稔,等.鉄鉱石焼結鉱の強度支配要因と強度予測モデル[J].铁と鋼, 1987, 73(8): 964. [42] Webster N A S, Pownceby M I, Madsen I C, et al. Silico-ferrite of calcium and aluminum (SFCA) iron ore sinter bonding phases: New insights into their formation during heating and cooling[J]. Metallurgical and Materials Transaction B, 2012, 43(6): 1344. [43] Scarlett N V Y, Maden I C, Pownceby M I, et al. In-situ diffraction analysis of iron ore sinter phases[J]. Journal of Applied Crystallography, 2004, 37: 362. [44] 刘征建,牛乐乐,张建良,等.钢铁企业烧结制粒工艺与设备优化进展及趋势[J].钢铁,2021, 56(10):28.(LIU Zheng-jian, NIU Le-le, ZHANG Jian-liang, et al.Status quo and trend of technology and equipment optimization for sintering granulation in iron and steel enterprises[J].Iron and Steel, 2021, 56(10):28.) [45] 周明顺,王义栋,赵东明,等.高配比磁铁精矿烧结技术的研究进展[J].钢铁,2020,55(5):1.(ZHOU Ming-shun, WANG Yi-dong, ZHAO Dong-ming, et al. Development on sintering technologies with high proportion of magnetite concentrates[J]. Iron and Steel, 2020,55(5):1.) [46] 翟晓波,吴胜利,阙志刚.加拿大铁精粉对烧结体固结强度的影响及其改善方法[J].钢铁,2019, 54(6):27.(ZHAI Xiaobo, WU Sheng-li, QUE Zhi-gang, et al.Effect of Canadian iron concentrate on bonding strength of sinter body and thereof improve method[J]. Iron and Steel, 2019, 54(6):27.)