Study on Treatment of Low Concentration Flue Gas From Sintering Process With Microwave Heated Absorbent
HAN Qinghong1，JIN Yonglong2，CANG Daqiang1，LIU Shuai2
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. School of Materials Science and Engineering, University of Science and Technology Liaoning, Anshan 114051, Liaoning, China
Abstract：The influencing factors of desulfuration and denitrification of flue gas with microwave heated absorbent such as gas flow rate, microwave power, blending,particle size and amount of absorbent,flue gas dampness and reaction temperature,were studied. The results show that flow rate, microwave power and reaction temperature are key factors.The mechanism of removing SO2 and NOx with absorbent by continuous microwave heating was analyzed.
韩庆虹;金永龙;苍大强;刘帅. 微波连续加热吸收剂处理烧结低浓度烟气的研究[J]. 钢铁, 2008, 43(8): 86-0.
HAN Qinghong;JIN Yonglong;CANG Daqiang;LIU Shuai. Study on Treatment of Low Concentration Flue Gas From Sintering Process With Microwave Heated Absorbent. Iron and Steel, 2008, 43(8): 86-0.
2008, Vol. 43 
