承钢高炉铁沟沉积物的形成机理研究
吕庆1 ，张振峰2，3 ，李福民1，2
1.河北理工大学冶金与能源学院， 河北 唐山 063009； 2. 东北大学材料与冶金学院， 辽宁 沈阳 110004； 3. 承德新新钒钛股份有限公司炼铁厂， 河北 承德 067002
Runner Sediment Formation Mechanism on Chenggang Blast Furnace
L Qing1 ,ZHANG Zhenfeng2,3 ,LI Fumin1, 2
1.College of Metallurgy and Energy, Hebei Polytechnic University, Tangshan 063009, Hebei, China; 2.School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China; 3.Ironmaking Plant, Chengde Xinxin Vatanium Titanium Company Limited, Chengde 067002, Hebei, China
摘要 针对承钢高炉铁沟粘结严重现象，对铁沟沉积物的形成机理进行了研究。结果表明：形成铁沟沉积物的主要原因是由于钒钛高炉渣的流动性能差，渣中铁滴析出TiC、Ti(C,N)和出铁过程降温综合作用的结果。改善高炉终渣的粘度温度性能，提高渣、铁分离能力是防治产生铁沟沉积物的有效措施。
关键词 ：
铁沟沉积物 ,
高氧化铝钒钛炉渣 ,
粘度温度性能 ,
TiC ,
Ti(C ,
N)
Abstract ：Runner sediment formation mechanism on Chenggang blast furnace was studied. The main reason of sediment formation is the integration of following factors: low fluidity of BF slag containing vatanium titanium, separation of TiC, Ti(C, N) in hot metal drops in slag, and temperature drop during tapping. The effective preventing measures are improving the fluidity of final slag and separation of slag from hot metal.
Key words ：
runner sediment
VTi slag of high Al2O3 content
ηtemperature capability
TiC
Ti(C
N)
收稿日期: 1900-01-01
[1]
Da‑peng Li, Hua‑zhang Wu, Hai‑feng Wang, Hong Li. Growth of solidified shell in bloom continuous casting mold of hypo-peritectic steel based on a FeS tracer method
[2]
Ping‑guo Jiang, Jin‑sheng Liu, Yi‑yu Xiao, Xiao‑heng Tan, Wen‑jie Liu. Recovery of iron from copper slag via modified roasting in CO–CO2 mixed gas and magnetic separation
[3]
Jing‑jing Wang, Wei‑sen Zheng, Xiao‑gang Lu, Yan‑lin He, Qing‑rong Yao, Jiang Wang. Experimental study of phase equilibria on Co–Fe-rich side of Co–Al–Fe system
[4]
Paul C. Okonkwo, Said Grami, Srinivasan Murugan, Shariq Khan. Effect of erosion on corrosion of API X120 steel in relation to erodent particle size
[5]
Zhen Zhang, Zheng‑fei Hu, Liang He, Xiao‑bo Zhang, Xin‑xian Fang, Bao‑sen Zhang, Zhi‑xin Ba. Effects of chloride on electrochemical and stress corrosion cracking behavior of 9Cr ferritic–martensitic steel
[6]
Teng Xu, Dong‑xiao Hou, Zheng‑nan Sun, Da‑wu Guo. Vibration characteristics of multi-parametric excitations and multi-frequency external excitations of rolling mill under entry thickness fuctuation of strip
[7]
Jie-bin Qi, Xin-xin Wang, Xiao-qiang Yan. Influence of mill modulus control gain on vibration in hot rolling mills
[8]
Ming Lei, Wei‑jun Hui, Jiao‑jiao Wang, Yong‑jian Zhang, Xiao‑li Zhao. Microstructure and mechanical properties of hot-rolled V-microalloyed Al-containing medium-Mn steel
[9]
Joong-ki Hwang. Effect of drawing speed on microstructure distribution and drawability in twinning-induced plasticity steel during wire drawing
[10]
E. Batuecas, C. Mayo, R. Díaz, F. J. Pérez. Infuence of elemental composition in environmental impacts of steel
[11]
Jin‑long Lu, Guo‑guang Cheng, Meng Wu, Guo Yang, Ju‑long Che. Detection and analysis of magnetic particle testing defects on heavy truck crankshaft manufactured by microalloyed medium-carbon forging steel
[12]
Jian-ming Su, Zhi-he Dou, Ting-an Zhang, Yan Liu. Kinetics of hot metal desulfurization by bottom blowing magnesium vapor
[13]
He ping Liu, Xian hui Wang, Liang ying Si, Jian Gong. Numerical simulation of 3D electromagnetic–thermal phenomena in an induction heated slab
[14]
Le Zhang, Wei Wang, M. Babar Shahzad, Yi yin Shan, Ke Yang. A novel laminated metal composite with superior interfacial bonding composed of ultrahigh strength maraging steel and 316L stainless steel
[15]
Qi yu Zang, Yang fan Jin, Tuo Zhang, Yi tao Yang. Efect of yttrium addition on microstructure, mechanical and corrosion properties of 20Cr13 martensitic stainless steel
2008, Vol. 43 
