Influence of asymmetric flatness errors on strip wandering in continuous annealing lines
BAO Ren-ren1,ZHANG Jie1,LI Hong-bo1,JIA Sheng-hui2,LIU Hai-jun 2,LI Xian-jie2
1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China 2. General Cold Rolling Plant, Wuhan Iron and Steel Co., Ltd., Wuhan 430083, Hubei, China
Abstract:Asymmetric flatness errors have a great influence on strip wandering in continuous annealing lines,especially the edge buckle. In order to present the asymmetry of flatness,asymmetry ratio is introduced. The relationship between strip wandering distance and asymmetry ratio is analyzed,which shows when the average asymmetry ratio of a length of strip rises above 0.5,the wandering distance of strips also increases. On the basic of analysis a standard of strip flatness produced by cold rolling progress is determined,with which the number of strip break in annealing line caused by flatness errors falls from 8 times per year to 3 times per year.
收稿日期: 2014-12-15
出版日期: 2015-04-28
引用本文:
包仁人,张 杰,李洪波,贾生晖,刘海军,李先杰. 非对称板形对连续退火炉内带钢跑偏的影响[J]. 钢铁, 2015, 50(5): 34-37.
BAO Ren-ren,ZHANG Jie,LI Hong-bo,JIA Sheng-hui,LIU Hai-jun ,LI Xian-jie. Influence of asymmetric flatness errors on strip wandering in continuous annealing lines. Iron and Steel, 2015, 50(5): 34-37.