Mathematical model of reasonable adjusting tuyere parameters of blast furnace and measures
LI Yang-long1,2,CHENG Shu-sen1,2,CHEN Chuan1,2
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
Abstract:The reasonable adjustment of tuyeres is benefit for blowing through center and activity of large BF hearth. At present, some views of actual operation were proposed that depth of raceway was increased by increasing the length of tuyere. And also blast velocity and kinetic energy could be increased by decreasing the area of tuyere. A mathematical model of adjusting tuyere parameter was established. Based on a domestic BF with volume of 3 200 m3, the blast volume, velocity and kinetic energy of each tuyere were analyzed by adjusting one tuyere’s length and area and multiple tuyeres’ size at the condition of constant total blast volume. It was found that blast volume, velocity and kinetic energy of the adjusted tuyeres would be decreased by increasing their lengths. The blast volume of the tuyeres would be reduced by decreasing their areas. The blast velocity and kinetic energy of the adjusted tuyeres could be enhanced with decreasing more tuyeres’ areas. However, the blast parameters of unadjusted tuyeres would be improved even more. The parameters of adjusting tuyere for this BF were given quantitatively according to this model, which could be utilized to control uniformity of hearth gas flow and maintain BF stable and smooth.
李洋龙,程树森,陈 川,. 合理调整高炉风口参数的数学模型及措施[J]. 钢铁, 2015, 50(6): 26-34.
LI Yang-long,,CHENG Shu-sen,,CHEN Chuan,. Mathematical model of reasonable adjusting tuyere parameters of blast furnace and measures. Iron and Steel, 2015, 50(6): 26-34.
Sasaki K, Hatano M, Watanabe M, et al. Investigation of Quenched No. 2 Blast Furnace at Kokura Works[J]. Tetsu-to-Hagane, 1976, 62(5): 580-591.
[1]
Sasaki K, Hatano M, Watanabe M, et al. Investigation of Quenched No. 2 Blast Furnace at Kokura Works[J]. Tetsu-to-Hagane, 1976, 62(5): 580-591.
[2]
Natsui S, Ueda S, Nogami H, et al. Analysis on Non-Uniform Gas Flow in Blast Furnace Based on DEM-CFD Combined Model[J]. Steel Research International, 2011, 82(8): 964-971.
[2]
Natsui S, Ueda S, Nogami H, et al. Analysis on Non-Uniform Gas Flow in Blast Furnace Based on DEM-CFD Combined Model[J]. Steel Research International, 2011, 82(8): 964-971.
[3]
Natsui S, Ueda S, Oikawa M, et al. Optimization of physical parameters of discrete element method for blast furnace and its application to the analysis on solid motion around raceway[J]. ISIJ international, 2009, 49(9): 1308-1315.
[3]
Natsui S, Ueda S, Oikawa M, et al. Optimization of physical parameters of discrete element method for blast furnace and its application to the analysis on solid motion around raceway[J]. ISIJ international, 2009, 49(9): 1308-1315.
[4]
Umekage T, Kadowaki M, Yuu S. Numerical simulation of effect of tuyere angle and wall scaffolding on unsteady gas and particle flows including raceway in blast furnace[J]. ISIJ international, 2007, 47(5): 659-668.
[4]
Umekage T, Kadowaki M, Yuu S. Numerical simulation of effect of tuyere angle and wall scaffolding on unsteady gas and particle flows including raceway in blast furnace[J]. ISIJ international, 2007, 47(5): 659-668.