Abstract:A prediction model of hot rolling force in heavy cylinder rolling was established. According to the geometric relationship of heavy cylinder and rolls in the rolling process,the geometric equation of asymmetric contact arc lengths of up roll and down roll were obtained. According to the field data and finite element method,the deformation equation of contact arc lengths of up roll and down roll was obtained. Based on the geometric equation and deformation equation,the contact arc lengths of up roll and down roll can be calculated. Because the ratio of contact arc length and average thickness is very small,the influence of cylinder outer end is bigger than that of the contact friction,based on field data and optimization algorithm,the stress influence coefficient of cylinder outer end was obtained. Further, the prediction model of hot rolling force in heavy cylinder rolling was established. Calculated results show that:The contact arc lengths of up roll and down roll are not equal, the contact arc length of up roll is bigger than that of down roll,the ratio of contact arc lengths of up roll and down roll is about 1.3,at the same time,the reduction of up roll is bigger than that of the down roll;Applied the model proposed in the heavy cylinder rolling,the error of calculated rolling force and measured rolling force is 9.2%,the calculation accuracy can meet the requirements of industrial application.
孙建亮,彭 艳,张永振,陈素文,韩 辉. 大型筒节轧制力预报模型[J]. 钢铁, 2015, 50(9): 64-70.
SUN Jian-liang,PENG Yan,ZHANG Yong-zhen,CHEN Su-wen,HAN Hui. Prediction model of hot rolling force in heavy cylinder rolling. Iron and Steel, 2015, 50(9): 64-70.
Banaszek G, Szota P. A comprehensive numerical analysis of the effect of relative feed during the operation of stretch forging of large ingots in profield anvils[J]. Journal of Material Processing Technology, 2005, 169(3): 427-444.
[1]
Banaszek G, Szota P. A comprehensive numerical analysis of the effect of relative feed during the operation of stretch forging of large ingots in profield anvils[J]. Journal of Material Processing Technology, 2005, 169(3): 427-444.
Nassir Anjami, Ali Basti. Investigation of rolls size effects on hot ring rolling process by coupled thermo mechanical 3D-FEA [J]. Journal of Materials Processing Technology, 2010, 210(10): 1364-1377.
[3]
Nassir Anjami, Ali Basti. Investigation of rolls size effects on hot ring rolling process by coupled thermo mechanical 3D-FEA [J]. Journal of Materials Processing Technology, 2010, 210(10): 1364-1377.
[4]
Parvizi, K. Abrinia, M. Salimi. Slab analysis of ring rolling assuming constant shear friction[J]. ASM International, 2011, 20(9):1505-1511.
[4]
Parvizi, K. Abrinia, M. Salimi. Slab analysis of ring rolling assuming constant shear friction[J]. ASM International, 2011, 20(9):1505-1511.
[5]
M. Salimi, M. Kadkhodaei. Slab analysis of asymmetrical sheet rolling[J]. Journal of materials processing technology, 2004,150:215-222.
[5]
M. Salimi, M. Kadkhodaei. Slab analysis of asymmetrical sheet rolling[J]. Journal of materials processing technology, 2004,150:215-222.
[6]
P.P. Gundur, M. A. Salunkhe, U.S. Dixit. A theoretical study on the application of asymmetric rolling for the estimation of friction[J]. International journal of mechanical sciences, 2008, 50:315-327.
[6]
P.P. Gundur, M. A. Salunkhe, U.S. Dixit. A theoretical study on the application of asymmetric rolling for the estimation of friction[J]. International journal of mechanical sciences, 2008, 50:315-327.
[7]
华林, 黄兴高, 朱春东. 环件轧制理论和技术[M]. 北京: 机械工业出版社, 2001.
[7]
华林, 黄兴高, 朱春东. 环件轧制理论和技术[M]. 北京: 机械工业出版社, 2001.
[8]
Xinghui Han, Lin Hua. Plastic deformation behaviors and mechanical properties of rolled rings of 20CrMnTi alloy in combined radial and axial ring rolling[J]. Materials and Design, 2014, 58: 508-517.
[8]
Xinghui Han, Lin Hua. Plastic deformation behaviors and mechanical properties of rolled rings of 20CrMnTi alloy in combined radial and axial ring rolling[J]. Materials and Design, 2014, 58: 508-517.
[9]
Sun Zhichao, Yang He, Ou Xinzhe. Thermo-mechanical coupled analysis of hot ring rolling process[J]. T Transactions of Nonferrous Metals Society of China (English Edition), 2008, 18(5): 1216-1222.
[9]
Sun Zhichao, Yang He, Ou Xinzhe. Thermo-mechanical coupled analysis of hot ring rolling process[J]. T Transactions of Nonferrous Metals Society of China (English Edition), 2008, 18(5): 1216-1222.
[10]
Wang Min, Yang He, Sun Zhichao, et al. Dynamic explicit FE modeling of hot ring rolling process[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2008, 16(6) :1274-1280.
[10]
Wang Min, Yang He, Sun Zhichao, et al. Dynamic explicit FE modeling of hot ring rolling process[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2008, 16(6) :1274-1280.
Chen Suwen, Liu Hongmin, Peng Yan, et al. Slab analysis of large cylindrical shell rolling[J]. Journal of Iron and Steel Research, International. 2014, 21(1): 1-8.
[14]
Chen Suwen, Liu Hongmin, Peng Yan, et al. Slab analysis of large cylindrical shell rolling[J]. Journal of Iron and Steel Research, International. 2014, 21(1): 1-8.
[15]
Su-WenChen, Hong-Min Liu, Yan Peng, et al. Strip layer method for simulation of the three-dimensional deformations of large cylindrical shell rolling[J]. International Journal of Mechanical Sciences, 2013, 77: 113-120.
[15]
Su-WenChen, Hong-Min Liu, Yan Peng, et al. Strip layer method for simulation of the three-dimensional deformations of large cylindrical shell rolling[J]. International Journal of Mechanical Sciences, 2013, 77: 113-120.