不锈钢软接触电磁连铸的工业试验

doi:10.13228/j.boyuan.issn0449-749x.20150280

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (0 KB) HTML (0 KB)
输出: BibTeX | EndNote (RIS)

摘要通过分析碳钢和不锈钢材质的电阻率差异性，以及304不锈钢软接触电磁连铸的中试试验结果，证实了不锈钢软接触电磁连铸的可行性。进而，在商业级规模铸机上分别开发了不锈钢圆坯和方坯软接触电磁连铸系统，进行了不同钢种、不同保护渣条件下的相关工业生产试验。结果表明，不锈钢圆坯和方坯软接触电磁连铸在不超过150 kW的电源输出功率条件下，均能获得较佳的振痕去除效果，改善铸坯表面质量。对获得的铸坯进行免修磨轧制成[?]8 mm线材，并经过固溶热处理以及酸洗等工序，使线材成品的综合成材率提高3%以上。多次生产试验采用不间断连浇方式，期间，软接触电磁连铸设备系统生产稳定可靠，未发现液面异常波动以及铸坯低倍组织卷渣等缺陷，使软接触电磁连铸技术向商业化生产运营迈出了关键一步。最后，讨论了软接触电磁连铸技术拓展至不锈钢板坯断面的可行性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	侯晓光
	王恩刚
	张永杰
	许秀杰
	邓安元

关键词 ：软接触电磁连铸, 不锈钢, 振痕, 电磁连铸

Abstract：The technology of soft-contacting electromagnetic continuous casting（SCEMCC） had been developed for several decades. However，it still needs to find a right point for commercial applications. throug analyzing the different of resistivity characteristics between stainless steel and carbon steels， and the pilot experimental results of 304 round billet SCEMCC，the feasibility of stainless steel SCEMCC was confirmed. Then，the new systems of round billet and square billet SCEMCC were developed respectively for industrial production experiments with different stainless steel grades and mold flux powders. The industrial production experimental result shows that the SCEMCC systems were effective and reliable to reduce the depth of almost all billet oscillation marks from about 0.7 mm to near zero，under the condition of 150 kW output power to the electromagnetic casting mold. Using obtained SCEMCC billets for milling [?]8 mm steel wire rod products，then processing with solution heat treatment and acid pickling，the material yield of end wire rod products can be increased more than 3%. Many times industrial continuous casting production experiments，in which the phenomenas of meniscus abnormal fluctuation and slag entrapped defects of billet macro structure were not being found，promoted SCEMCC taking a key step on business operation. Finally，the feasibility of SCEMCC from the billet section expending to the slab was discussed.

收稿日期: 2015-06-17 出版日期: 2015-10-29

引用本文:

侯晓光，王恩刚，张永杰，许秀杰，邓安元. 不锈钢软接触电磁连铸的工业试验[J]. 钢铁, 2015, 50(11): 45-52. HOU Xiao-guang，，WANG En-gang，ZHANG Yong-jie，XU Xiu-jie，DENG An-yuan. Industrial application of stainless steel soft-contacting electromagnetic continuous casting. Iron and Steel, 2015, 50(11): 45-52.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20150280 或 http://www.chinamet.cn/Jweb_gt/CN/Y2015/V50/I11/45

[1]	Brimacombe J K, Sorimachi K. Crack formation in the continuous casting of steel [J]. Metallurgical and Materials Transactions B, 1977, 8B(7): 489.
[1]	Brimacombe J K, Sorimachi K. Crack formation in the continuous casting of steel [J]. Metallurgical and Materials Transactions B, 1977, 8B(7): 489.
[2]	Harada S, Tanaka S. A formation mechanism of transverse cracks on ccslab surface [J]. ISlJ Int, 1990, 30(4): 310.
[2]	Harada S, Tanaka S. A formation mechanism of transverse cracks on ccslab surface [J]. ISlJ Int, 1990, 30(4): 310.
[3]	Hwang B, Lee H S, Kim Y G, et al. Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates [J]. Materials Science and Engineering A, 2005, 402(8): 177.
[3]	Hwang B, Lee H S, Kim Y G, et al. Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates [J]. Materials Science and Engineering A, 2005, 402(8): 177.
[4]	Sengupta J, Thomas B G, Shin H J, et al. A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabs [J]. Metallurgical And Materials Transactions A, 2006, 37A(5): 1597.
[4]	Sengupta J, Thomas B G, Shin H J, et al. A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabs [J]. Metallurgical And Materials Transactions A, 2006, 37A(5): 1597.
[5]	Takeuchi E, Brimacombe J K. Effect of oscillation-mark formation on the surface quality of continuously cast steel slabs [J]. Metallurgical Transactions B, 1985, 16B(7): 605.
[5]	Takeuchi E, Brimacombe J K. Effect of oscillation-mark formation on the surface quality of continuously cast steel slabs [J]. Metallurgical Transactions B, 1985, 16B(7): 605.
[6]	余志样主编. 连铸坯热装热送技术[M]. 北京: 冶金工业出版社, 2002.YU Zhi-xiang. Hot delievery and hot charge technology for continuous casting[M]. Beijing: Metallurgical industrial press,2002.
[6]	余志样主编. 连铸坯热装热送技术[M]. 北京: 冶金工业出版社, 2002.YU Zhi-xiang. Hot delievery and hot charge technology for continuous casting[M]. Beijing: Metallurgical industrial press,2002.
[7]	Asai. S. Theoritical base of application of electromagnetic force [M]. Nishiyama Memorial Seminar. ISIJ. 1994: 89.
[7]	Asai. S. Theoritical base of application of electromagnetic force [M]. Nishiyama Memorial Seminar. ISIJ. 1994: 89.
[8]	Tingju Li, Shinji N, Kensuke S, et al. Study of meniscus behavior and surface properties during casting in a high-frequency magnetic field [J]. Metallurgical And Materials Transactions B, 1995, 26B(4): 353.
[8]	Tingju Li, Shinji N, Kensuke S, et al. Study of meniscus behavior and surface properties during casting in a high-frequency magnetic field [J]. Metallurgical And Materials Transactions B, 1995, 26B(4): 353.
[9]	Nakata H, Inoue T, Mori H, et al. Improvement of billet surface quality by ultra-high frequency electromagnetic casting [J]. ISIJ Int, 2002, 42(3): 264.
[9]	Nakata H, Inoue T, Mori H, et al. Improvement of billet surface quality by ultra-high frequency electromagnetic casting [J]. ISIJ Int, 2002, 42(3): 264.
[10]	Park J, Kim H, Jeong H, et al. Continuous casting of steel billet with high frequency electromagnetic field [J]. ISIJ International, 2003, 43(6): 813.
[10]	Park J, Kim H, Jeong H, et al. Continuous casting of steel billet with high frequency electromagnetic field [J]. ISIJ International, 2003, 43(6): 813.
[11]	张永杰,侯晓光, 陈向勇, 等. 电磁软接触连铸工业实验用结晶器结构[J]. 重型机械, 2005, (4):13.ZHANG Yong-jie,HOU Xiao-guang,CHEN Xiang-yong, et al. Industrial mold constructure for electromagnetic continuous casting[J]. Heavy Machinery, 2005, (4):13.
[11]	张永杰,侯晓光, 陈向勇, 等. 电磁软接触连铸工业实验用结晶器结构[J]. 重型机械, 2005, (4):13.ZHANG Yong-jie,HOU Xiao-guang,CHEN Xiang-yong, et al. Industrial mold constructure for electromagnetic continuous casting[J]. Heavy Machinery, 2005, (4):13.
[12]	Masahiro T, Masafumi Z, Takehiko T, et al. Electromagnetic casting technique for slab casting[J], Nippon Steel Technical Report. 2013,(104):62.
[12]	Masahiro T, Masafumi Z, Takehiko T, et al. Electromagnetic casting technique for slab casting[J], Nippon Steel Technical Report. 2013,(104):62.
[13]	HOU Xiao-guang, ZHANG Yong-jie, WANG En-gang, et al. the research on soft contacting electromagnetic continuous casting in Baosteel [J]. Journal of Iron and Steel Research,International(Supplement 1), 2012, (19):46.
[13]	HOU Xiao-guang, ZHANG Yong-jie, WANG En-gang, et al. the research on soft contacting electromagnetic continuous casting in Baosteel [J]. Journal of Iron and Steel Research,International(Supplement 1), 2012, (19):46.
[14]	连续铸钢手册[M]. 机械工业出版社.Continuous Casting Manual[M]. Beijing: Mechanical industrial press.
[14]	连续铸钢手册[M]. 机械工业出版社.Continuous Casting Manual[M]. Beijing: Mechanical industrial press.
[15]	许秀杰, 邓安元, 王恩刚, et al. 电磁软接触连铸圆坯表面振痕演变机理[J]. 金属学报, 2009, 45(4): 464.XU Xiu-jie, DENG An-yuan, WANG En-gang, et al. Evolvement of surface oscillation marks on round billet for electromagnetic continuous casting[J]. Acta Metallugical Sinica, 2009, 45(4): 464.
[15]	许秀杰, 邓安元, 王恩刚, et al. 电磁软接触连铸圆坯表面振痕演变机理[J]. 金属学报, 2009, 45(4): 464.XU Xiu-jie, DENG An-yuan, WANG En-gang, et al. Evolvement of surface oscillation marks on round billet for electromagnetic continuous casting[J]. Acta Metallugical Sinica, 2009, 45(4): 464.
[16]	Takeuchi E,Brimacombe J K. The formation of oscillation marks in the continuous casting of steel slabs [J]. Metallurgical Transactions B, 1984, 15B(9): 493.
[16]	Takeuchi E,Brimacombe J K. The formation of oscillation marks in the continuous casting of steel slabs [J]. Metallurgical Transactions B, 1984, 15B(9): 493.
[17]	Schwerdtfeger K, Sha H. Depth of oscillation marks forming in continuous casting of steel [J]. Metallurgical And Materials Transactions B, 2000, 31B(8): 813.
[17]	Schwerdtfeger K, Sha H. Depth of oscillation marks forming in continuous casting of steel [J]. Metallurgical And Materials Transactions B, 2000, 31B(8): 813.
[18]	Badri A, Natarajan T T, Snyder C C, et al. A mold simulator for continuous casting of steel Part I. The formation of oscillation marks during the continuous casting of low carbon steel [J]. Metallurgical And Materials Transactions B, 2005, 36B(6): 355.
[18]	Badri A, Natarajan T T, Snyder C C, et al. A mold simulator for continuous casting of steel Part I. The formation of oscillation marks during the continuous casting of low carbon steel [J]. Metallurgical And Materials Transactions B, 2005, 36B(6): 355.
[19]	Badri A, Natarajan T T, Snyder C C, et al. A mold simulator for continuous casting of steel Part II. The formation of oscillation marks during the continuous casting of low carbon steel [J]. Metallurgical And Materials Transactions B, 2005, 36B(6): 373.
[19]	Badri A, Natarajan T T, Snyder C C, et al. A mold simulator for continuous casting of steel Part II. The formation of oscillation marks during the continuous casting of low carbon steel [J]. Metallurgical And Materials Transactions B, 2005, 36B(6): 373.
[20]	Pavel E, Ramirez L,Kenneth C M, et al. A unified mechanism for the formation of oscillation marks [J]. Metallurgical And Materials Transactions B, 2012, 43B(2): 109.
[20]	Pavel E, Ramirez L,Kenneth C M, et al. A unified mechanism for the formation of oscillation marks [J]. Metallurgical And Materials Transactions B, 2012, 43B(2): 109.
[21]	Tingju Li, Shinji N, Kensuke S, et al. Surface quality improvement of continuous cast metals by imposing intermittent high frequency magnetic field and syn-chronizing the field with mold oscillation [J]. ISlJ Int, 1996, 36(4): 410.
[21]	Tingju Li, Shinji N, Kensuke S, et al. Surface quality improvement of continuous cast metals by imposing intermittent high frequency magnetic field and syn-chronizing the field with mold oscillation [J]. ISlJ Int, 1996, 36(4): 410.