Abstract:In order to study the effect of bonding temperature and reduction ratio on properties of titanium clad steel plate,TA2/Q235B composite plate was prepared by hot-rolled bonding in a vacuum. The microstructural properties of the composite plate were investigated by scanning electron microscopy and energy dispersive spectrometer. The results show that when the bonding temperature was between 850 and 1 050 ℃,the thickness of ferrite region near the carbon steel side of the composite interface increased with the bonding temperature. And the increase of the compound on the composite interface made the shear strength reduced. The large reduction ratio is conducive to improve the bonding strength. When the bonding temperature were 850 and 950 ℃,the reduction ratio was 58%,and the rolling temperature was 1 050 ℃,the reduction ratio was 70%,the shear strength of the bonding surface reached the 0 types titanium clad steel plate standard in national standards.
收稿日期: 2017-09-25
出版日期: 2018-04-09
引用本文:
余 超,吴宗河,郭子楦,郑学丰,谢红飙,肖 宏. 热轧钛/钢复合板显微组织和性能[J]. , 2018, 53(4): 42-47.
YU Chao,WU Zong-he,GUO Zi-xuan,ZHENG Xue-feng,XIE Hong-biao,XIAO Hong. Microstructure and properties of hot-rolled bonded titanium clade steel plate. Iron and Steel, 2018, 53(4): 42-47.
XU Zhe-feng.Research Progress of Titanium Steel Composite Plate Prepared by Hot-pressing Diffusion Method[J].Hot Working Technology, 2017(10): 14.
[2]
XU Zhe-feng.Research Progress of Titanium Steel Composite Plate Prepared by Hot-pressing Diffusion Method[J].Hot Working Technology, 2017(10): 14.
[3]
Ha J S, Hong S I.Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures[J]. Materials Science & Engineering A, 2016(651): 805.
[3]
Ha J S, Hong S I.Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures[J]. Materials Science & Engineering A, 2016(651): 805.
[4]
Prasanthi T N, Sudha R C, Saroja S.Explosive cladding and post-weld heat treatment of mild steel and titanium[J]. Materials & Design, 2016(93): 180.
[4]
Prasanthi T N, Sudha R C, Saroja S.Explosive cladding and post-weld heat treatment of mild steel and titanium[J]. Materials & Design, 2016(93): 180.
ZHAO Lin-sheng, SHI Chang-gen, GE Yu-heng, et al.Parameter optimization in double vertical explosive welding of Ti /steel[J], Materials Science & Technology, 2016, 24(1):80.
[6]
ZHAO Lin-sheng, SHI Chang-gen, GE Yu-heng, et al.Parameter optimization in double vertical explosive welding of Ti /steel[J], Materials Science & Technology, 2016, 24(1):80.
[7]
Momono T, Enjo T, Ikeuchi K.Effect of carbon content on the diffusion bonding of iron and steel to titanium[J].Isij International, 2007, 30(11):978-
[7]
Momono T, Enjo T, Ikeuchi K.Effect of carbon content on the diffusion bonding of iron and steel to titanium[J].Isij International, 2007, 30(11):978-
[8]
Jiang H T, Yan X Q, Liu J X, et al.Effect of heat treatment on microstructure and mechanical property of Ti?steel explosive-rolling clad plate[J].Transactions of Nonferrous Metals Society of China, 2014, 24(3):697-
[8]
Jiang H T, Yan X Q, Liu J X, et al.Effect of heat treatment on microstructure and mechanical property of Ti?steel explosive-rolling clad plate[J].Transactions of Nonferrous Metals Society of China, 2014, 24(3):697-
DAI Xiang-lin, LIU Bao-xi, MA Jiu-le, et al.Microstructure and mechanical properties of stainless steel clad plate fabricated by vacuum hot rolling[J].Iron and Steel, 2017, 52(2):65-
[10]
DAI Xiang-lin, LIU Bao-xi, MA Jiu-le, et al.Microstructure and mechanical properties of stainless steel clad plate fabricated by vacuum hot rolling[J].Iron and Steel, 2017, 52(2):65-
LUO Zong-an, CHEN Xiao-feng, XIE Guang-ming, ed al.Microstructure and mechanical property of vacuum hot-rolled 825 alloyX65 pipeline steel clad plate[J].Iron and Steel, 2017, 52(3):64-
[12]
LUO Zong-an, CHEN Xiao-feng, XIE Guang-ming, ed al.Microstructure and mechanical property of vacuum hot-rolled 825 alloyX65 pipeline steel clad plate[J].Iron and Steel, 2017, 52(3):64-
[13]
Saboktakin M, Razavi G R, Monajati H, The investigate metallurgical properties of roll bonding titanium clad steel[J].International Journal of Applied Physics and Mathematics, 2011, 1(3):177.
[13]
Saboktakin M, Razavi G R, Monajati H, The investigate metallurgical properties of roll bonding titanium clad steel[J].International Journal of Applied Physics and Mathematics, 2011, 1(3):177.
[14]
Yan J C, Zhao D S, Wang C W, et al.Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer[J].Materials Science & Technology, 2013, 25(7):914-
[14]
Yan J C, Zhao D S, Wang C W, et al.Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer[J].Materials Science & Technology, 2013, 25(7):914-
[15]
Luo Z A, Wang G L, Xie G M, et al.Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer[J].Acta Metallurgica Sinica, 2013, 26(6):754-
[15]
Luo Z A, Wang G L, Xie G M, et al.Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer[J].Acta Metallurgica Sinica, 2013, 26(6):754-