1. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China 2. Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China
Abstract:To reveal the high strength-toughness mechanism of 1 000 MPa low carbon plus Nb,V,Ti oil pipeline steel,the relationship between chemical composition-process-microstructure and performance of two carbon content (S1(w(C)=0.09%) and S2(w(C)=0.17%)) oil pipeline steel was studied. Experiments showed that microstructure of S1 and S2 steel after water quenched were a mixture of lath bainite with a little martensite and martensite with a little lath bainite respectively. After tempered at 450-600 ℃ for 30 min,carbides precipitated in the microstructure of both steels. The yield strength of S1 steel after tempered remain unchanged and tensile strength declined slightly for about 70 MPa. Both the yield strength and tensile strength of S2 steel after tempered increased for 170 MPa. The calculation using solubility product formula showed that alloy elements Nb and Ti were completely precipitated in both steels after quenching,and the volume percent of Nb and Ti precipitations were very low. Therefore precipitation strengthening of VC in ferrite matrix after tempering played an important role in the maintaining of yield strength for S1 steel and the increasing of yield strength and tensile strength for S2 steel.
李鹤林,张亚平,韩礼红. 油井管发展动向及高性能油井管国产化(上)[J]. 钢管,2007,36(6):1. (LI He-lin,ZHANG Ya-ping,HAN Li-hong. Development situation of OCTG and production localization of hi-grade OCTG(Part Ⅰ)[J]. Steel Pipe,2007,36(6):1.)
[2]
李鹤林,张亚平,韩礼红. 油井管发展动向及高性能油井管国产化(下)[J]. 钢管,2008,37(1):1. (LI He-lin,ZHANG Ya-ping,HAN Li-hong. Development situation of OCTG and production localization of hi-grade OCTG(Part Ⅱ)[J]. Steel Pipe,2008,37(1):1.)
[3]
李鹤林,韩礼红,张文利. 高性能油井管的需求与发展[J]. 钢管,2009,38(1):1. (LI He-lin,HAN Li-hong,ZHANG Wen-li. Demand for and development of hi-performance OCTG[J]. Steel Pipe,2009,38(1):1.)
[4]
李鹤林,吉玲康,谢丽华. 中国石油钢管的发展现状分析[J]. 河北科技大学学报,2006,27(1):1. (LI He-lin,JI Ling-kang,XIE Li-hua. Current situation analysis of oil steel pipe in China[J]. Journal of Hebei University of Science and Technology,2006,27(1): 1.)
[5]
李鹤林. 油井管发展动向及若干热点问题(上)[J]. 钢管,2005,34(6):1. (LI He-lin. Development trend of OCTG and related topics of general interest(Part Ⅰ)[J]. Steel Pipe,2005,34(6):1.)
[6]
谢香山. 高性能油井管的发展及其前景[J]. 上海金属,2000,22(3): 3. (XIE Xiang-shan. The development and prospect of the superior oil country tubular goods[J]. Shanghai Metals,2000,22(3):3.)
[7]
陈润农,李昭东,张明亚,等. 铌微合金化极低屈服点钢的组织与性能[J]. 钢铁,2019,54(1):63. (CHEN Run-nong,LI Zhao-dong,ZHANG Ming-ya,et al. Microstructure and properties of Nb microalloyed ultra low yield point steel[J]. Iron and Steel,2019,54(1):63.)
[8]
李新创. 新时代钢铁工业高质量发展之路[J]. 钢铁,2019,54(1):1. (LI Xin-chuang. Road map to high-quality development of iron and steel industry in new age[J]. Iron and Steel,2019,54(1):1.)
[10]
XIE Zhen-jia,FANG Yu-pei,HAN Gang,et al. Structure-property relationship in a 960 MPa grade ultrahigh strength low carbon niobium-vanadium microalloyed steel:The significance of high frequency induction tempering[J]. Materials Science and Engineering A,2014,618:112.
[11]
贺飞,尚成嘉,张峰,等. 合金设计对高强HFW焊管用钢强度和韧性的影响[J]. 焊管,2012,35(11):13. (HE Fei,SHANG Cheng-jia,ZHANG Feng,et al. Effect of alloy design on strength and toughness of high strength ERW welded pipe steels[J]. Welding Pipe and Tube,2012,35(11):13.)
[12]
温长飞,邓想涛,王昭东,等. 轧制冷却工艺对低合金超高强钢Q1300组织性能的影响[J]. 轧钢,2018,35(5):6.(WEN Chang-fei,DENG Xiang-tao,WANG Zhao-dong,et al. Influence of rolling and cooling process on microstructure and properties of ultra-high strength low alloy steel Q1300[J]. Steel Rolling,2018,35(5):6.)
[9]
American Petroleum Institute. G5CT09 Specification for Casing and Tubing[S]. USA:American Petroleum Institute,2011.
[13]
XIE Zhen-jia,SHANG Cheng-jia,WANG Xue-lin,et al. Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering[J]. Materials Science and Engineering A,2018,727:200.
[14]
房玉佩,谢振家,尚成嘉. 感应回火对1 000 MPa级高强度低合金钢碳化物析出行为及韧性的影响[J]. 金属学报,2014,50(12):1413. (FANG Yu-pei,XIE Zhen-jia,SHANG Cheng-jia. Effect of induction tempering on carbide precipitation behavior and toughness of a 1 000 MPa grade high strength low alloy steel[J]. Acta Metallurgica Sinica,2014,50(12):1413.)
[10]
XIE Zhen-jia,FANG Yu-pei,HAN Gang,et al. Structure-property relationship in a 960 MPa grade ultrahigh strength low carbon niobium-vanadium microalloyed steel:The significance of high frequency induction tempering[J]. Materials Science and Engineering A,2014,618:112.
[11]
贺飞,尚成嘉,张峰,等. 合金设计对高强HFW焊管用钢强度和韧性的影响[J]. 焊管,2012,35(11):13. (HE Fei,SHANG Cheng-jia,ZHANG Feng,et al. Effect of alloy design on strength and toughness of high strength ERW welded pipe steels[J]. Welding Pipe and Tube,2012,35(11):13.)
[12]
温长飞,邓想涛,王昭东,等. 轧制冷却工艺对低合金超高强钢Q1300组织性能的影响[J]. 轧钢,2018,35(5):6.(WEN Chang-fei,DENG Xiang-tao,WANG Zhao-dong,et al. Influence of rolling and cooling process on microstructure and properties of ultra-high strength low alloy steel Q1300[J]. Steel Rolling,2018,35(5):6.)
[15]
Lee J B,Kang N,Park J T,et al. Kinetics of carbide formation for quenching and tempering steels during high-frequency induction heat treatment[J]. Materials Chemistry and Physics,2011,129(1/2):365.
[13]
XIE Zhen-jia,SHANG Cheng-jia,WANG Xue-lin,et al. Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering[J]. Materials Science and Engineering A,2018,727:200.
[16]
CHEN Hui,Wei Lu-jie,XIE Zhen-jia,et al. Carbide precipitation and hydrogen embrittlement susceptibility of a 960 MPa grade ultra-high strength steel[J]. Materials Technology,2019,34(2):68.
[14]
房玉佩,谢振家,尚成嘉. 感应回火对1 000 MPa级高强度低合金钢碳化物析出行为及韧性的影响[J]. 金属学报,2014,50(12):1413. (FANG Yu-pei,XIE Zhen-jia,SHANG Cheng-jia. Effect of induction tempering on carbide precipitation behavior and toughness of a 1 000 MPa grade high strength low alloy steel[J]. Acta Metallurgica Sinica,2014,50(12):1413.)
[17]
雍岐龙. 钢铁材料中的第二相[M]. 北京:冶金工业出版社,2006. (YONG Qi-long. The Second Phase of Steel and Iron Material[M]. Beijing:Metallurgical Industry Press,2006.)
[15]
Lee J B,Kang N,Park J T,et al. Kinetics of carbide formation for quenching and tempering steels during high-frequency induction heat treatment[J]. Materials Chemistry and Physics,2011,129(1/2):365.
[16]
CHEN Hui,Wei Lu-jie,XIE Zhen-jia,et al. Carbide precipitation and hydrogen embrittlement susceptibility of a 960 MPa grade ultra-high strength steel[J]. Materials Technology,2019,34(2):68.
[17]
雍岐龙. 钢铁材料中的第二相[M]. 北京:冶金工业出版社,2006. (YONG Qi-long. The Second Phase of Steel and Iron Material[M]. Beijing:Metallurgical Industry Press,2006.)