Abstract：In order to meet the ultra-low emission standard of iron and steel industry,based on the source control and emission reduction technology,the sintering process of Baosteel adopts two co-purification processes,including four-electric field electrostatic precipitation and two-level activated carbon adsorption method,and four-electric field electrostatic precipitation and CFB desulfurization plus SCR denitrification method. The equipment,emission reduction effect and operation cost of the two processes are systematically analyzed. The results show that SO2 emission concentration of both processes can lower than 20 mg/m3 (standard state), and can be potential to meet NOx ultra-low emission limits lower than 50 mg/m3 (standard state),but it is difficult to reach the requirement that the emission limits of particulate matter lower than 10 mg/m3 (standard state). The by-product recovery rate of two-level activated carbon adsorption is high. While the synergistic purification process will produce a large amount of desulfurization ash,resulting in extra disposal. In terms of investment and comprehensive cost,the two-level activated carbon adsorption method is higher than the synergistic purification method,but if depreciation operation cost and direct cost are not considered,the result is just opposite. The energy consumption of the converted ton sinter of the synergistic purification method is significantly higher than that of the two-level activated carbon secondary adsorption method. Based on the analysis of environmental protection tax amount,the unit pollution equivalent removal and emission cost,producing and environmental protection facilities should be considered as a whole cooperate.
周茂军, 张代华. 宝钢烧结烟气超低排放技术集成与实践[J]. 钢铁, 2020, 55(2): 144-151.
ZHOU Mao-jun, ZHANG Dai-hua. Technology integration and practice of ultra-low emission of sintering flue gas in Baosteel. Iron and Steel, 2020, 55(2): 144-151.
[1] 辛仁周. 推动我国钢铁工业率先转向高质量发展阶段[J]. 中国钢铁业,2018(1):6.(XIN Ren-zhou. Promoting China′s iron and steel industry to take the lead in turning to high-quality development stage[J]. China Steel,2018(1):6.)
[2] 贺克斌. 打赢蓝天保卫战需要加快钢铁行业超低排放改造[N]. 中国环境报,2019-05-06(03).(HE Ke-bin. Winning the blue sky defense war needs speeding up the reform of ultra-low emission in iron and steel industry[N]. China Environment News,2019-05-06(03).)
[3] 于勇,朱廷钰,刘霄龙. 中国钢铁行业重点工序烟气超低排放技术进展[J]. 钢铁,2019,54(9):1. (YU Yong,ZHU Ting-yu,LIU Xiao-long. Progress of ultra-low emission technology for key processes of iron and steel industry in China[J]. Iron and Steel,2019,54(9):1.)
[4] 孙敏敏,宁晓钧,张建良,等. 炼铁系统节能减排技术的现状和发展[J]. 中国冶金,2018,28(3):1. (SUN Min-min,NING Xiao-jun,ZHANG Jian-liang,et al. Research status and progress of energy saving and emission reduction technology for ironmaking[J]. China Metallurgy,2018,28(3):1.)
[5] 赵春丽,吴铁,伯鑫,等. 钢铁行业烧结烟气脱硫现状及协同治理对策建议[J]. 环境工程,2014(10):76.(ZHAO Chun-li,WU Tie,BO Xin,et al. The status quo of sintering flue gas desulfurization of iron and steel industry and pollutants co-treatment suggestion[J]. Environmental Engineering,2014(10):76.)
[6] 赵荣志,梁宝瑞. 烧结烟气脱硫脱硝技术现状[C]//2013年全国烧结烟气综合治理技术研讨会论文集. 大同:中国金属学会,2013:47.(ZHAO Rong-zhi,LIANG Bao-rui. Present situation of sintering flue gas desulfurization and denitrification technology[C]//Papers Collection of the National Symposium on Comprehensive Treatment of Sintering Flue Gas in 2013. Datong:The Chinese Society for Metals,2013:47.)
[7] 常治铁. SDS+SCR工艺在焦炉烟气脱硫脱硝中的应用[J]. 中国冶金,2019,29(10):65. (CHANG Zhi-tie. Application of SDS+SCR process in desulfurization and denitration of coke oven flue gas[J]. China Metallurgy,2019,29(10):65.)
[8] 阮志勇. 铁矿烧结烟气氧化-氨法协同脱硫脱硝[J]. 中国冶金,2018,28(5):72. (RUAN Zhi-yong. Simultaneously desulfurization and denitration of iron ore sintering flue gas based on pre- oxidized and ammonia process[J]. China Metallurgy,2018,28(5):72.)
[9] 韩加友,洪建国,张玉文. 烧结烟气臭氧氧化-半干法吸收脱硫脱硝实践[J]. 中国冶金,2019,29(11):76. (HAN Jia-you,HONG Jian-guo,ZHANG Yu-wen. Practice of desulfurzation and denitrition of sintering waste gas with method of ozone oxidation and semi-dry absorption[J]. China Metallurgy,2019,29(11):76.)
[10] 环境保护部,国家质量监督检验检疫总局. GB 28662—2012 钢铁烧结、球团工业大气污染物排放标准[S]. 北京:中国环境科学出版社,2012.(Ministry of Environmental Protection,General Administration of Quality Supervision,Inspection and Quarantine. GB 28662—2012 Emission Standards for Air Pollutants in Iron and Steel Sintering and Pelletizing Industries[S]. Beijing:China Environmental Science Press,2012.)
[11] 生态环境部,国家发展和改革委员会,等.《关于推进实施钢铁行业超低排放的意见》(环大气[2019]35号)[EB/OL]. http://www.mee.gov.cn/xxgk2018/xxgk/xxgk03/201904/t20190429_701463.html,2019-04-28.(Ministry of Ecology and Environment, National Development and Reform Commission, et al. Opinions on Promoting the Implementation of Ultra-Low Emissions in Iron and Steel Industry([2019] No. 35)[EB/OL]. http://www.mee.gov.cn/xxgk2018/xxgk/xxgk03/201904/t20190429_701463.html,2019-04-28.)
[12] 周茂军.大型烧结机烟气净化工艺方案比较与分析[J]. 世界钢铁,2014,14(2):9. (ZHOU Mao-jun. Comparison and analysis of the flue gas cleaning process schemes of large sized sinter machine[J]. World Iron and Steel,2014,14(2):9.)
[13] 汪庆国,朱彤,李勇. 宝钢烧结烟气活性炭净化工艺和装备[J]. 钢铁,2018,53(3):87.(WANG Qing-guo,ZHU Tong,LI Yong. Sintering flue gas purifying process and equipment by use of activated coke in Baosteel[J]. Iron and Steel,2018,53(3):87.)
[14] 张春霞,王海风,张寿荣,等. 中国钢铁工业绿色发展工程科技战略及对策[J]. 钢铁,2015,50(10):4.(ZHANG Chun-xia,WANG Hai-feng,ZHANG Shou-rong,et al. Strategic study on green development of Chinese steel industry[J]. Iron and Steel,2015,50(10):4.)
[15] 陈凯华,宋存义,张东辉,等. 烧结烟气联合脱硫脱硝工艺的比较[J]. 烧结球团,2008,33(5):29.(CHEN Kai-hua,SONG Cun-yi,ZHANG Dong-hui,et al. A comparison of simultaneous desulfurzation and denitrition technologies of sintering waste gas[J]. Sintering and Pelletizing,2008,33(5):29.)
[16] 全国铁矿石与直接还原铁标准化技术委员会. GB/T 32545—2016 铁矿石产品等级的划分[S]. 北京:中国标准出版社,2016.(National Technical Committee for Standardization of Iron Ore and Direct Reduction Iron. GB/T 32545—2016 Classification of Iron Ore Products[S]. Beijing:Standards Press of China,2016.)
2020, Vol. 55 
