Abstract：In view of the problem that brittle compounds are easily formed at the bonding interface of stainless steel and carbon steel during hot rolling, which affects the mechanical properties of composite plates. In this paper, the vacuum hot rolling composite experiment with different thickness of pure iron interlayer was carried out under the conditions of rolling temperature of 1000℃, 1100℃, 1200 ℃and reduction of about 70%. The effect of pure iron interlayer on the interfacial microstructure and tensile properties of composite plate was studied by optical microscopy, SEM observation and tensile test. The results show that the tensile properties of stainless steel/carbon steel composite plates are improved to varying degrees at the same temperature when different thickness of pure iron interlayer was added. And under less than 70% reduction，2 mm thick pure iron interlayer can completely prevent the carbon element in carbon steel from diffusing to stainless steel side, avoid the formation of carbochromium compounds, so as to improve the microstructure of the bonding interface and mechanical properties.
赵云鹏 余超 肖宏 吴宗河 许朋朋 谢红飙. 纯铁中间层对热轧不锈钢复合板性能的影响[J]. , 2020, 55(5): 0-0.
Hong Xiao. Effect of pure iron interlayer on mechanical properties of hot rolled stainless steel clad plate. , 2020, 55(5): 0-0.
T. Koseki，J. Inoue，S. Nambu，Development of multilayer steels for improved combinations of high strength and high ductility[J], Materials Transactions，2014，55（2）：227-237.
[2]
SU Hang，LUO Xiao-bing，CHAI, Feng，et al. Manufacturing Technology and Application Trends of Titanium Clad Steel Plates[J]. Journal of Iron and Steel Research, International，2015，22（11）：977-982.
[3]
Bouaziz O，Masse J P，Petitgand G，et al. A Novel Strong and Ductile TWIP/Martensite Steel Composite[J]. Advanced Engineering Materials，2016，18（1）：6-59.
[4]
YU Chao，XIAO Hong，YU Hui，et al. Mechanical properties and interfacial structure of hot-roll bonding TA2/Q235B plateusing DT4 interlayer[J]. Materials Science and Engineering：A，2017，695（1）：120.
[5]
代响林，刘宝玺，马久乐，等. 真空热轧法制备不锈钢复合板组织和力学性能[J]. 钢铁，2017，52（2）：65. （DAI Xiang-lin，LIU Bao-xi，MA Jiu-le，et al. Microstructure and mechanical properties of stainless steel clad plate prepared by vacuum hot rolling[J]. Iron and Steel，2017，52（2）：65.）
[6]
LI Long，YIN Fu-xing，Kotobu Nagai. Progress of laminated materials and clad steels production[J]. Materials Science Forum，2011：439-447.
[7]
ZHANG Shao-kun，XIAO Hong，XIE Hong-biao. The preparation and property research of the stainless steel/iron scrap clad plate[J]. Journal of Materials Processing Technology，2014，214（6）：1205.
[8]
Kacar R , Acarer M. An investigation on the explosive cladding of 316L stainless steel-din-P355GH steel[J]. Journal of Materials Processing Technology，2004，152（1）：91-96.
[9]
Ka?ar R，Acarer M. Microstructure–property relationship in explosively welded duplex stainless steel–steel[J]. Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing)，2003，363（1-2）：290-296.
[10]
张心金，李龙，刘会云，等. 中间夹层在金属复合板制造过程中的应用[J]. 轧钢，2013，30（6）：45.（ZHANG Xin-jin，LI Long，LIU Hui-yun，et al. Application of insert layer in manufacturing clad metal plates[J]. Steel Rolling，2013，30（6）：45.）
[11]
谢红飙,王德蔚,余超,等.纯铁做中间材制备不锈钢/碳钢热轧复合板[J]. 钢铁，2017，52（12）：48-53. （XIE Hong-biao,WANG De-wei，YU Chao，et al. Stainless steel/carbon steel composite plate prepared by hot-roll bonding with pure iron as intermediate material[J]. Iron and Steel，2017，52（12）：48-53. ）
[12]
刘宝龙，张慧芳，肖振兴，等. 316L/Q345R热轧复合板界面组织演变及性能[J]. 钢铁，2017，52（5）：72.（LIU Bao-long，ZHANG Hui-fang，XIAO Zhen-xing，et al. Microstructure evolution and properties of interface in 316L/Q345R hot rolled clad plate[J]. Iron and Steel，2017，52（5）：72.）
[13]
LI Hao，ZHANG Li-yuan，ZHANG Bo-yang，et al. Microstructure characterization and mechanical properties of stainless steel clad plate[J]. Materials，2019，12：509
[14]
CHEN C X，LIU M Y，LIU B X，et al. Tensile shear sample design and interfacial shear strength of stainless steel clad plate[J]. Fusion Engineering and Design，2017，125：431-441.
[15]
LIU B X，WANG S，FANG W，et al. Microstructure and mechanical properties of hot rolled stainless steel clad plate by heat treatment[J]. Materials Chemistry and Physics，2018，216：460-467.
[16]
WANG S，LIU B X，CHEN C.X，et al. Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios[J]. Journal of Alloys and Compounds，2018，766：517-526.
[17]
LIU B X，YIN F X，DAI X L，et al. The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status[J]. Materials Science & Engineering A，2017，679：172-182.
[18]
JING Y，QIN Y，ZANG X M，et al. The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere[J]. Journal of Materials Processing Technology，2014（214）：1686.
[19]
YANG Gong-xian，XU Yong-feng，JIANG Lei，et al. High temperature tensile properties and fracture behavior of cast nickel-base K445 superalloy[J]. Progress in Natural Science: Materials International，2011，21（5）：418-425.
2020, Vol. 55 
