Pitting corrosion resistance of hot stamping forming SAF2507 SDSS in different solutions
ZHANG Yu-zhu1, LAN Jian-feng1, MO Qian2, HU Shan3
1. Academic of Intelligent Engineering of College of Mobile Telecommunications, Chongqing University of Posts and Telecommunications, Chongqing 401520, China; 2. No.2 Branch Factory, Chongqing Wangjiang Industry Co., Ltd., Chongqing 400071, China; 3. Institute of New Energy and Vehicle, Nanchang Institute of Science and Technology, Nanchang 330108, Jiangxi, China
Abstract：In order to research the influence of anions on pitting corrosion resistance of SAF2507 SDSS after hot stamping forming in different service environments,SAF2507 SDSS plates were subjected to hot stamping forming at 1 050 ℃. The phases and chemical composition were observed and tested by using ZEISS-SUPRA55 scanning electron microscope and energy dispersive spectrometer. The pitting corrosion resistance of SAF2507 SDSS in 3.5% NaClO and sodium halide (NaX,X=Cl,Br,and I) solutions by mass were investigated by means of potentiodynamic polarization curves,open circuit potentials and AC impedance spectroscopy. The results show that the microstructure of SAF2507 SDSS of hot stamping forming at 1 050 ℃ is favorable and the volume ratio of α/γ is about 1∶1. The potential of α phase which is riched in Cr,Mo and depleted in Ni is lower than γ phase as the anode during the corrosion process. In four aggressive solutions,the pitting corrosion resistance from high to low is NaClO,NaCl,NaBr,and NaI. The number of pitting cavities in the NaClO solution are least,and the size of pitting cavities are small and shallow. In contrast,The number of pitting cavities in the NaI solution are maximum and the size of pitting cavities are large and deep. The ClO- ions inhibit the nucleation and growth of pittings and the Cl-,Br-,and I- ions only promote the nucleation of pittings,and the influence from high to low is I-,Br-,and Cl-.
张钰柱, 蓝剑锋, 莫茜, 胡珊. 热冲压成形SAF2507 SDSS在不同溶液中耐点蚀性能[J]. 钢铁, 2020, 55(7): 113-119.
ZHANG Yu-zhu, LAN Jian-feng, MO Qian, HU Shan. Pitting corrosion resistance of hot stamping forming SAF2507 SDSS in different solutions[J]. Iron and Steel, 2020, 55(7): 113-119.
[1] 高娃,罗建民,杨建君,等. 双相不锈钢的研究进展及其应用[J]. 兵器材料科学与工程,2005,28(3):61.(GAO Wa,LUO Jian-min,YANG Jian-jun,et al. Research progress and application of double phase stainless steel[J]. Ordnance Material Science and Engineering,2005,28(3):61.) [2] 李志军,陈湘茹,孙卿卿,等. 双相不锈钢的研究与发展[J]. 铸造技术,2011,32(9):128.(LI Zhi-jun,CHEN Xiang-ru,SUN Qing-qing,et al. Recent research and prospect of duplex stainless steel[J]. Foundry Technology,2011,32(9):128.) [3] 贾如雷. 超级双相不锈钢热变形行为及热加工工艺参数优化[D]. 上海:上海交通大学,2014.(JIA Ru-lei. Study on the Hot Deformation Behavior and Hot Working Process Optimization of Super Duplex Stainless Steel[D]. Shanghai:Shanghai Jiao Tong University,2014.) [4] 丰涵,周晓玉,刘虎,等. 特超级双相不锈钢的发展现状及趋势[J]. 钢铁研究学报,2015,27(4):1.(FENG Han,ZHOU Xiao-yu,LIU Hu,et al. Development and trend of hyper duplex stainless steels[J]. Journal of Iron and Steel Research,2015,27(4):1.) [5] 陈雨来,罗照银,李静媛. 固溶温度对S32760双相不锈钢组织与耐点蚀性能的影响[J]. 金属学报,2015,51(9):1085.(CHEN Yu-lai,LUO Zhao-yin,LI Jing-yuan. Effect of solution temperature on microstructure and pitting corrosion resistance of S32760 duplex stainless steel[J]. Acta Metallurgica Sinica,2015,51(9):1085.) [6] SONG Zhi-gang,FENG Han,HU Shao-mei. Development of Chinese duplex stainless steel in recent years[J]. Journal of Iron and Steel Research,2017,24(2):121. [7] 高祥明,裴明德,李国平. 冷轧硬化对超级双相不锈钢S32750析出相的影响[J]. 钢铁,2019,54(9):94. (GAO Xiang-ming,PEI Ming-de,LI Guo-ping. Influence of cold rolling on precipitation of S32750 super duplex stainless steel[J]. Iron and Steel,2019,54(9):94.) [8] 杨吉春,王军,任磊,等. 铈对S32550双相不锈钢微观组织及冲击性能的影响[J]. 钢铁,2020,55(1):86. (YANG Ji-chun,WANG Jun,REN Lei,et al. Effect of Ce on microstructure and impact propertiesof S32550 duplex stainless stee[J]. Iron and Steel,2020,55(1):86.) [9] 郭幼丹,程晓农. 基于多层复合微观结构的22MnB5钢热成形的力学行为[J]. 塑性工程学报,2012,19(4):103.(GUO You-dan,CHENG Xiao-nong. Study on hot forming mechanical behavior and properties of 22MnB5 steel based on multilayer-complex microstructure[J]. Journal of Plasticity Engineering,2012,19(4):103.) [10] 郭幼丹. 高强度板热成形变形机制与回弹研究[J]. 热加工工艺,2011,40(15):8.(GUO You-dan. Study on hot forming transmutation mechanism and springback of high strength steel[J]. Hot Working Technology,2011,40(15):8.) [11] 王继红,丰涵,宋志刚,等. 钨含量及固溶温度对022Cr25Ni-7Mo3.5WCuN钢耐腐蚀性能的影响[J]. 中国冶金,2019,29(9):33.(WANG Ji-hong,FENG Han,SONG Zhi-gang,et al. Influence of tungsten content and solid solution temperature on corrosion resistance of 022Cr25Ni7Mo3.5WCuN steel[J]. China Metallurgy,2019,29(9):33.) [12] 赵天宇,陈吉,孙彦伟,等. 2205双相不锈钢在硫酸中的腐蚀性能[J]. 腐蚀与防护,2015,36(6):535.(ZHAO Tian-yu,CHEN Ji,SUN Yan-wei,et al. Corrosion resistance of 2205 duplex stainless steel in sulfuric acid solutions[J]. Corrosion and Protection,2015,36(6):535.) [13] Pardo A,Merino M C,Otero E,et al. Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions[J]. Materials and Corrosion,2015,51(12):850. [14] Hachemi H,Azzaz M,Djeghlal M E. Influence of temperature and chloride concentration on passivation mechanism and corrosion of a DSS2209 welded joint[J]. Journal of Materials Engineering and Performance,2016,25(10):1. [15] 李文娟,朱瑞涛,郑慧敏,等. 硫酸介质中卤素离子对201Cu不锈钢电化学腐蚀行为的影响[J]. 山西大学学报,2013,36(4):609.(LI Wen-juan,ZHU Rui-tao,ZHENG Hui-min,et al. Effect of halide irons to electrochemical corrosion behavior of 201Cu stainless steel in sulfuric acid medium[J]. Journal of Shanxi University,2013,36(4):609.) [16] 高丽飞,杜敏. 304不锈钢在淡化海水中的点蚀行为[J]. 腐蚀科学与防护技术,2017,29(1):8.(GAO Li-fei,DU Min. Pitting corrosion behavior of 304 stainless steel in desalination seawater[J]. Corrosion Science and Protection Technology,2017,29(1):8.) [17] 安朋亮,梁平,张云霞,等. 2205双相不锈钢的抗氢氟酸腐蚀行为[J]. 材料保护,2016,49(11):18. (AN Peng-liang,LIANG Ping,ZHANG Yun-xia,et al. Corrosion resistance of 2205 duplex stainless steel in hydrofluoric acid[J]. Material Protection,2016,49(11):18.) [18] 逄旭光,梁平,张云霞,等. 2205和316L不锈钢在氢氟酸中的电化学腐蚀行为[J]. 腐蚀科学与防护技术,2016,28(6):537.(PANG Xu-guang,LIANG Ping,ZHANG Yun-xia,et al. Electrochemical corrosion behavior of stainless steels 2205 and 316L in hydrofluoric acid[J]. Corrosion Science and Protection Technology,2016,28(6):537.) [19] 王冬. 超级不锈钢254和2507在苛刻环境下的腐蚀行为研究[D]. 西安:西安建筑科技大学,2016.(WANG Dong. Study on Corrosion Behavior of Super Stainless Steel 254 and 2507 in the Harsh Environment[D]. Xi′an:Xi′an University of Architecture and Technology,2016.) [20] 金松. 超级双相不锈钢2507腐蚀与钝化行为研究[D]. 天津:天津大学,2015. (JIN Song. Corrosion and Passive Behavior of Super Duplex Stainless Steel 2507[D]. Tianjin:Tianjin University,2015.) [21] 蓝剑锋. 热成形双相不锈钢析出相与海洋环境中耐点蚀性能研究[D]. 厦门:集美大学,2018.(LAN Jian-feng. Study on Precipitations and Pitting Corrosion Resistance of Hot Forming Duplex Stainless Steel in Marine Environment[D]. Xiamen:Jimei University,2018.) [22] 蓝剑锋,郭幼丹,梁昱晨,等. SAF2507双相不锈钢热成形工艺下的析出相与力学性能[J]. 船舶工程,2017(10):57.(LAN Jian-feng,GUO You-dan,LIANG Yu-chen,et al. Preci-pitation phase and mechanical properties of SAF2507 duplex stainless steel after hot forming[J]. Ship Engineering,2017(10):57.) [23] 王钦娟,刘东. 铸造双相不锈钢金相浸蚀剂的研究[J]. 实验科学与技术,2014,12(6):10.(WANG Qin-juan,LIU Dong. Study on metallographic etcant for cast duplex stainless steel[J]. Experiment Science and Technology,2014,12(6):10.) [24] 张艳,李倩,王胜刚. 2507双相不锈钢在NaClO溶液中的腐蚀性能[J]. 材料工程,2016,44(1):108.(ZHANG Yan,LI Qian,WANG Sheng-gang. Corrosion resistance of 2507 duplex stainless steel in NAClO solution[J]. Journal of Material Engineering,2016,44(1):108.) [25] 徐宏妍,第五江涛,刘霞,等. ZK60镁合金在卤化钠溶液中的腐蚀行为研究[J]. 中国腐蚀与防护学报,2015,35(3):245.(XU Hong-yan,DIWU Jiang-tao,LIU Xia,et al. Corrosion behavior of ZK60 Magnesium alloy in sodium halide solutions[J]. Journal of Chinese Society for Corrosion and Protection,2015,35(3):245.) [26] 孙祺. 析出相对2205双相不锈钢点蚀与选择性腐蚀的影响[D]. 太原:太原理工大学,2016.(SUN Qi. Influence of Precipitates on Pitting Corrosion and Selective Corrosion in 2205 Duplex Stainless Steel[D]. Taiyuan:Taiyuan University of Technology,2016.) [27] 何业东,齐慧滨. 材料腐蚀与防护概论[M]. 北京:机械工业出版社,2005.(HE Ye-dong,QI Hui-bin. Material Corrosion and Protection[M]. Beijing:Machinery Industry Press,2005.)
2020, Vol. 55 
