Basic analysis of waste plastic hydrochars injection for blast furnace
NING Xiao-jun1,2, TENG Hai-peng1, WANG Guang-wei1, ZHANG Jian-liang1, ZHANG Nan1, WANG Chuan3
1. School of Metallurgy and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 2. Guanzhuang Campus, University of Science and Technology Beijing, Beijing 100083, China; 3. Swerim AB, Luleå SE-97125, Sweden
Abstract:In order to reduce the environmental pollution and consumption of fossil fuel in the production of ironmaking, subcritical hydrothermal methods were used to treat waste plastics. The obtained solid products (hydrochars) were analyzed,such as ignition temperature,explosiveness,combustion,reactivity,etc.,so as to explore the feasibility of waste plastic hydrochars for blast furnace injection. The results showed that the proximate analysis of the hydrochars HTC-1 produced by plastic pipe (PVC)was similar to bituminous coal,and the characteristics of combustion and reaction of anthracite (YJ) were improved with mixing HTC-1. However,the carbon content of hydrochars HTC-2 produced by beverages bottle (PET) was low (3.33%),the volatiles of it was 96.67%.Therefore,ensuring the security of injection,it was necessary to strictly control the amount of addition.
宁晓钧, 滕海鹏, 王广伟, 张建良, 张楠, 王川. 废塑料水热炭高炉喷吹基础性能分析[J]. 钢铁, 2020, 55(8): 123-129.
NING Xiao-jun, TENG Hai-peng, WANG Guang-wei, ZHANG Jian-liang, ZHANG Nan, WANG Chuan. Basic analysis of waste plastic hydrochars injection for blast furnace[J]. Iron and Steel, 2020, 55(8): 123-129.
[1] 中国铁合金网. 统计局:2019年全国粗钢产量9.963 4亿吨.[2020-01-17].http://www.ferro-alloys.cn/News/Details/281313.(Ferro-Alloys.com. Statistical bureau:China's crude steel output was 966.34 million tons in 2019.[2020-01-17].http://www.ferro-alloys.cn/News/Details/281313.) [2] 王海洋,张建良,王广伟,等. 铁前系统的二氧化碳减排技术浅析[J]. 中国冶金,2018,28(1):1. (WANG Hai-yang,ZHANG Jian-liang,WANG Guang-wei,et al. Analysis of carbon dioxide emission reduction before ironmaking[J]. China Metallurgy,2018,28(1):1.) [3] 龙红明,魏汝飞,李宁,等. 高炉炼铁协同处理城市可燃固废[J]. 钢铁,2018,53(3):1. (LONG Hong-ming,WEI Ru-fei,LI Ning,et al. Disposal of city combustible solid waste by blast furnace[J]. Iron and Steel,2018,53(3):1.) [4] 王海洋,张建良,王广伟,等. 褐煤用于高炉喷吹的可行性[J]. 钢铁研究学报,2017,29(1):39.(WANG Hai-yang,ZHANG Jian-liang,WANG Guang-wei,et al. Feasibility of lignite injection in blast furnace[J]. Journal of Iron and Steel Research,2017,29(1):39.) [5] 郑常乐,张建良,章鹏程,等. 提质煤代替高炉部分喷吹用煤及其性能[J]. 钢铁,2015,50(10):8.(ZHENG Chang-le,ZHANG Jian-liang,ZHANG Peng-cheng,et al. Upgraded coal replace part of blast furnace injection coal and its performance[J]. Iron and Steel,2015,50(10):8.) [6] 彭政富,张建良,毕传光,等. 焦粉与兰炭对高炉混煤燃烧特性的影响[J]. 钢铁,2019,54(12):10.(PENG Zheng-fu,ZHANG Jian-liang,BI Chuan-guang,et al. Effect of coke powder and semi-coke on combustion characteristics of blast furnace blended coal[J]. Iron and Steel,2019,54(12):10.) [7] 李杰,李小静,李帮平,等. 兰炭用作高炉喷吹燃料的试验分析[J]. 中国冶金,2019,29(12):14. (LI Jie,LI Xiao-jing,LI Bang-ping,et al. Experimental analysis on use of semi-coke as fuel for blast furnace injection[J]. China Metallurgy,2019,29(12):14.) [8] 王舜. 兰炭用于高炉喷吹的可行性初探[C]//第九届中国钢铁年会论文集. 北京:中国金属学会,2013:592.(WANG Shun. Feasibility of semi-coke for blast furnace injection[C]// Proceedings of the 9th China Iron and Steel Annual Meeting. Beijing:The Chinese Society for Metals,2013:592.) [9] 王朋. 生物质半焦应用于高炉喷吹的基础研究[D]. 北京:北京科技大学,2019.(WANG Peng. Basic Research on the Application of Biomass Coke in Blast Furnace Injection[D]. Beijing:University of Science and Technology Beijing,2019.) [10] ZOU C,HE J Y,ZHAO J X,et al. Structure and reactivity of low-rank coal chars prepared from fluidized bed and moving bed pyrolyzers and the potential for using them in pulverized coal injection (PCI)[J]. Metallurgical and Materials Transactions B,2019,50(5):2304. [11] 刘竹林,蒋友源,寿擎,等. 高炉混合喷吹用生物质燃料可磨性及燃烧性能分析[J]. 中国冶金,2020,30(3):8. (LIU Zhu-lin,JIANG You-yuan,SHOU Qing,et al. Analysis on grindability and combustion performance of biomass fuel for mixed injection of blast furnace[J]. China Metallurgy,2020,30(3):8.) [12] 高鹏,赵丹宁,王平,等. 马钢4 000 m3高炉喷吹煤粉燃烧性能研究与应用[J]. 钢铁,2018,53(12):10. (GAO Peng,ZHAO Dan-ning,WANG Ping,et al. Study and application on combustibility of pulverized coal injection at 4 000 m3 BF of Masteel[J]. Iron and Steel,2018,53(12):10.) [13] 方胜杰. 中国塑料再生行业发展现状及未来展望[J]. 中国石油和化工经济分析,2019(4):30.(FANG Sheng-jie. China plastic recycling industry development status and future prospects[J]. Economic Analysis of China Petroleum and Chemical Industry,2019(4):30.) [14] 李军旗. 高炉喷吹煤与废塑料混合燃料的应用基础研究[D]. 昆明:昆明理工大学,2007.(LI Jun-qi. Basic Research on Application of Blast Furnace Injection Coal and Waste Plastic Mixed Fuel[D]. Kunming:Kunming University of Science and Technology,2007.) [15] 郭廷杰. 德、日高炉喷吹废塑料情况简介[J]. 中国冶金,2001,11(6):38.(GUO Yan-jie. Brief introduction of waste plastic injection in German and Japanese blast furnaces[J]. China Metallurgy,2001,11(6):38.) [16] 李博知,尹国才,秦学武. 中国高炉喷吹废塑料的可行性分析[J]. 中国冶金,2006,16(6):47.(LI Bo-zhi,YIN Guo-cai,QIN Xue-wu. Feasibility analysis of waste plastics sprayed into blast furnace in China[J]. China Metallurgy,2006,16(6):47.) [17] 赵娟,崔怡. 高炉喷吹塑料废弃物技术研究进展[J]. 青岛理工大学学报,2007(4):62.(ZHAO Juan,CUI Yi. Research progress of blast furnace injection plastic waste technology[J]. Journal of Qingdao Technological University,2007(4):62.) [18] NING X J,TENG H P,WANG G W,et al. Physiochemical properties and combustion analysis of hydrothermal carbonization solid fuel from polyvinyl chloride waste[J]. Fuel,2020,270:117526. [19] 孙学信. 燃煤锅炉燃烧试验技术与方法[M]. 北京:中国电力出版社,2002.(SUN Xue-xin. Technology and Method of Combustion Experiment in Coal-Fired Boiler[M]. Beijing:China Electric Power Press,2002.) [20] 李杰,宋灿阳,李小静,等. 高炉喷吹煤粉燃烧性与反应性的研究与应用[J]. 中国冶金,2019,29(1):8.(LI Jie,SONG Can-yang,LI Xiao-jing,et al. Research and application of blast furnace pulverized coal combustion and reactivity[J]. China Metallurgy,2019,29(1):8.) [21] 韦欢,周永平,张红丽. 喷吹煤对焦炭热性能影响的研究[J]. 河南冶金,2014,22(3):6.(WEI Huan,ZHOU Yong-ping,ZHANG Hong-li. Study on the influence of thermal properties of pulverized coal coke[J]. Henan Metallurgy,2014,22(3):6.)