Effect of rolling process on microstructure and properties of high strength anti-seismic fire resistant steel plates
ZHAN Fang1, LIN Tian-zi2, YIN Shu-biao3, CAO Jian-chun1, GAO Peng1, LU Chun-xiang1
1. Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China; 2. Iron and Steel Research Institute, Anshan Iron and Steel Group, Anshan 114009, Liaoning, China; 3. Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China
Abstract:In order to improve the yield strength of construction steel,optimize the rolling process and reduce production costs. Laboratory steel rolling experiments are combined with room temperature and high temperature tensile tests,as well as scanning and transmission electron microscopy observations. The microstructure and mechanical properties of high-strength anti-seismic refractory steel plates under four different rolling processes were studied. The results show that the microstructure of the steel plates are mainly composed of ferrite and granular bainite. When the rough rolling temperature is higher,the yield strength of room temperature and high temperature of the steel plates are higher,and the volume fraction of granular bainite is also large. When the rolling and cooling temperatures are high,the yield strength of the high temperature can meet the mechanical performance requirements of the construction fire-resistant steel plate. With the increase of the opening temperature,the yield strength of the test steel plate is further improved,but the ferrite in the structure is large and the toughness is poor. According to the results of the impact test,it can be found that as the impact temperature decreases,the fracture absorption work of the test steel plate decreases more. The analysis results of the precipitated phase show that the precipitated phases are mainly (Nb,Ti)C and (Ti,Nb,Mo)C,and the size of the precipitated phase is larger.
詹放, 林田子, 阴树标, 曹建春, 高鹏, 陆春祥. 轧制工艺对高强抗震耐火钢板组织性能的影响[J]. 钢铁, 2020, 55(9): 86-96.
ZHAN Fang, LIN Tian-zi, YIN Shu-biao, CAO Jian-chun, GAO Peng, LU Chun-xiang. Effect of rolling process on microstructure and properties of high strength anti-seismic fire resistant steel plates[J]. Iron and Steel, 2020, 55(9): 86-96.
[1] 万荣春,孙锋,张澜庭,等. Mo对耐火钢高温屈服强度的影响[J]. 工程科学学报,2013,35(3):325.(WAN Rong-chun,SUN Feng,ZHANG Lan-ting,et al. Effect of Mo on high temperature yield strength of fire-resistant steel[J]. Journal of Engineering Science,2013,35(3):325.) [2] 林田子. 490 MPa级耐火钢组织及性能的研究[D]. 鞍山:辽宁科技大学,2012.(LIN Tian-zi. Study on Microstructure and Properties of 490 MPa Grade Fire-Resistant Steel[D]. Anshan:Liaoning University of Science and Technology,2012.) [3] 刘志勇. 建筑用耐火钢性能与组织的研究[D]. 昆明:昆明理工大学,2005.(LIU Zhi-yong. Research on Properties and Organization of Fire-Resistant Steel for Construction[D]. Kunming:Kunming University of Science and Technology,2005.) [4] 张晓娟,苑少强,梁国俐. 高层建筑用耐火钢的研究与应用[J]. 唐山学院学报,2009(6):36.(ZHANG Xiao-juan,YUAN Shao-qiang,LIANG Guo-li. Research and application of fire resistant steel for high-rise buildings[J]. Journal of Tangshan University,2009 (6):36.) [5] 姚连登. 控轧工艺对Mn-Mo-Nb-B系超低碳贝氏体钢力学性能的影响[J]. 钢铁研究,2004,32(4):43.(YAO Lian-deng. Effect of controlled rolling process on mechanical properties of Mn-Mo-Nb-B ultra-low carbon bainitic steel [J]. Iron and Steel Research,2004,32(4):43.) [6] 吴年春. 遇火强化型耐火钢Q420FRE的物理冶金原理与力学性能[J]. 钢铁,2014,49(10):82. (WU Nian-chun. Physical metallurgical principles and mechanical properties of fire-feinforced fire-resistant steel Q420FRE[J]. Iron and Steel,2014,49(10):82.) [7] Rikio Chijiiwa,Yuzuru Yoshida,Ryuji Uemori,et al. Development and practical application of fire-resistant steel for buildings [J]. Materials and Design,2012,36:227. [8] John G Speer,Steven G Jansto,Justin C Cross,et al. Elevated temperature properties of niobium-microalloyed steels for fire-resistant structural applications [C]//The Joint International Conference of HSLA Steels 2005 and ISUGS 2005 Proceedings(HSLA Steels)15th.Beijing:China Academic Journal Electronic Publishing House,2005:822.) [9] 刘庆春,雍岐龙,郑之旺,等. 钒对耐火钢显微组织及高温性能的影响[J]. 钢铁,2016,51(7):76.(LIU Qing-chun,YONG Qi-long,ZHENG Zhi-wang,et al. Effect of vanadium on microstructure and high temperature properties of fire-resistant steel[J]. Iron and Steel,2016,51(7):76.) [10] Young R I,Yong J O,Byeong J L,et al. Effects of carbide precipitation on the strength and Charpy impact properties of low carbon Mn-Ni-Mo bainitic steels [J]. Journal of Nuclear Materials,2001,297(2):138. [11] KONG J H,ZHEN L,GUO B,et al. Influence of Mo content on microstructure and mechanical properties of high strength pipeline steel[J]. Materials and Design,2004,25(8): 723. [12] 赵捷,王志奇,李建平. 低碳粒状贝氏体钢强韧化机理的探讨[J]. 天津理工大学学报,2000,16(1):11.(ZHAO Jie,WANG Zhi-qi,LI Jian-ping. Discussion on strengthening and toughening mechanism of low carbon granular bainitic steel [J]. Journal of Tianjin University of Technology,2000,16(1): 11.) [13] 钟群鹏,赵子华. 断口学[M]. 北京:高等教育出版社,2006.(ZHONG Qun-peng,ZHAO Zi-hua. Fracture[M]. Beijing: Higher Education Press,2006.) [14] 贺静,刘锦云,丛慧,等. 合金元素Mo与V对建筑用耐火钢的影响[J]. 西华大学学报:自然科学版,2005,24(5):85.(HE Jing,LIU Jin-yun,CONG Hui,et al. Effects of alloying elements Mo and V on fire-resistant steel for building [J]. Journal of Xihua University:Natural Science,2005,24(5):85.) [15] 赵捷,王志奇,李建平. 低碳粒状贝氏体钢强韧化机理的探讨[J]. 天津理工学院学报,2000,16(1):11.(ZHAO Jie,WANG Zhi-qi,LI Jian-ping. Study on the mechanism of strengthening and toughening of low-carbon bainitic steel[J] Journal of Tianjin Institute of Technology,2000,16(1):11.) [16] 何承绪. 590 MPa级耐火钢组织与微结构的研究[D]. 鞍山:辽宁科技大学,2013.(HE Cheng-xu. Research on Microstructure and Microstructure of 590 MPa Grade Refractory Steel[D]. Anshan:University of Science and Technology Liaoning,2013.) [17] 雍岐龙. 钢铁材料中的第二相[M]. 北京:冶金工业出版社,2006.(YONG Qi-long. Secondary Phases in Steels[M]. Beijing:Metallurgical industry Press,2006.) [18] 李春智,马龙腾,田志红,等. 高性能Q460耐火耐候结构用钢的研发[J]. 中国冶金,2018,28(7):19.(LI Chun-zhi,MA Long-teng,TIAN Zhi-hong,et al. Development of high-performance Q460 steel for refractory and weathering structure[J]. China Metallurgy,2018,28(7):19.)