Selection of PMC ore size, preheating and roasting process parameters for pelletizing
LU Jian-guang1,2, LIU Xiao-jie3, LÜ Qing3
1. School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China; 2. Hansteel Company, HBIS Group, Handan 056000, Hebei, China; 3. College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063009, Hebei, China
Abstract:In order to promote the efficient utilization of PMC ore powder, the effects of particle size, preheating, and roasting temperature of PMC ore powder on the compressive strength, reduction index, reduction degradation index, swelling rate, drum strength, porosity, and softening-melting properties of pellets were studied. The results indicate that, with the increase of preheating and roasting temperature, the compressive strength, reduction index, drum strength and softening-melting properties of pellets are improved, and the change of reduction degradation index is small; with the increase of roasting temperature, the swelling rate increases first and then decreases, and the porosity decreases; with the increase of preheating temperature, the swelling rate of No.1 pellets decreases, while theswelling rateof No.2 pellets increases slightly; with the increase of preheating temperature, the porosity of two kinds of PMC pellets first decreases and then increases, and the porosity is the lowest when preheating temperature is 950 ℃. According to the above research results, the best process parameters are determined by the weighted grey correlation method: the particle size of No.1 PMC, the preheating temperature is 925 ℃, and the roasting temperature is 1 300 ℃.
卢建光, 刘小杰, 吕庆. PMC矿粒度及球团预热、焙烧工艺参数的选择[J]. 钢铁, 2020, 55(10): 21-28.
LU Jian-guang, LIU Xiao-jie, LÜ Qing. Selection of PMC ore size, preheating and roasting process parameters for pelletizing[J]. Iron and Steel, 2020, 55(10): 21-28.
[1] LÜ W, SUN Z Q, SU Z J. Life cycle energy consumption and greenhouse gas emissions of iron pelletizing process in China, a case study[J]. Journal of Cleaner Production, 2019,233: 1314. [2] 王新东,李建新,胡启晨. 基于高炉炉料结构优化的源头减排技术及应用[J]. 钢铁,2019,54(12):104. (WANG Xin-dong, LI Jian-xin, HU Qi-chen. Application practice of source and process sulfur-nitate reduction technology based on optimization of blast furnace charge structure[J]. Iron and Steel, 2019, 54(12): 104.) [3] 余正伟,向爱平,刘山平,等. 低铁高硅赤铁精矿对氧化球团性能的影响[J]. 中国冶金,2020,30(6):8.(YU Zheng-wei, XIANG Ai-ping, LIU San-ping et al. Effect of low iron and high silicon hematite concentrate ratio on properties of oxidized pellets[J]. China Metallurgy, 2020, 30(6): 8.) [4] 王维兴. 高炉炼铁精料技术的内涵[J]. 世界金属导报,2014-09-23(B02).(WANG Wei-xing. The connotation of blast furnace ironmaking concentrate technology[J]. World Metal Guide, 2014-09-23(B02).) [5] 杨天钧. 坚持精料方针提高高炉操作水平[J]. 世界金属导报,2014-07-01 (B08).(YANG Tian-Jun. Adhere to the policy of fine charging and improve the operation level of blast furnace[J]. World Metal Guide, 2014-07-01 (B08).) [6] 王维兴. 提高高炉炉料中球团矿配比、促进节能减排[J]. 冶金管理,2018(9):53.(WANG Wei-xing. Increase the proportion of pellets in blast furnace burden, promote energy saving and emission reduction[J]. Metallurgical Management, 2018(9): 53.) [7] 张淑会,薛向欣,刘然,等. 尾矿综合利用现状及其展望[J]. 矿冶工程,2005(3):44.(ZHANG Shu-hui, XUE Xiang-xin, LIU Ran, et al. Current situation and prospect of the comprehensive utilization of mining tailings[J]. Mining and Metallurgical Engineering, 2005(3):44.) [8] 陈树军,刘凯,王小艾,等. 高炉使用含PMC矿炉料的配矿结构研究[J]. 材料与冶金学报,2016,15(3):159.(CHEN Shu-jun, LIU Kai, WANG Xiao-ai, et al. Study on the blast furnace burden structure containing PMC ore[J]. Journal of Materials and Metallurgy, 2016, 15(3): 159.) [9] 田野,吕庆,刘小杰,等. PMC精矿粉细磨粒度对球团质量的影响[J]. 矿冶工程,2017,37(1):85.(TIAN Ye, LÜ Qing, LIU Xiao-jie, et al. Effect of grinding fineness of PMC on qualities of pellets[J]. Mining and Metallurgical Engineerig, 2017, 37(1): 85.) [10] 陈树军,刘凯,吕庆. 不同配比下PMC矿粉和司家营矿粉造球工艺试验研究[J]. 材料科学与工艺,2016,24(6):85.(CHEN Shu-jun, LIU Kai, LÜ Qing. Experimental study on the pelletizing with PMC and sijiaying ore mineral powder under different ratio[J]. Materials Science and Technology, 2016, 24(6): 85.) [11] 吕庆,田野,刘小杰,等. PMC精矿配加司家营矿粉球团焙烧机理[J]. 钢铁,2016,51(8):17.(LÜ Qing, TIAN Ye, LIU Xiao-jie, et al. Roasting mechanism of pellet made from PMC and Sijiayig[J]. Iron and Steel, 2016, 51(8):17.) [12] 吕庆,田野,刘小杰,等. 添加不同配比的铜尾矿PMC应用于球团制备的研究[J]. 矿产综合利用,2018(2):86.(LÜ Qing, TIAN Ye, LIU Xiao-jie, et al. Study on producing pellets with different ratio of PMC[J]. Multipurpose Utilization of Mineral Resources, 2018(2): 86.) [13] 胡志清,潘建,朱德庆,等. 铁精矿原料特性及其对成球性能的影响[J]. 烧结球团,2013,38(4):42. (HU Zhi-qing, PAN Jian, ZHU De-qing, et al. Raw material characteristics of iron ore concentrate and its influence on balling performance[J]. Sintering and Pelletizing, 2013,38(4): 42.)