Influence of chamfering on roll shape performance of variable contact-length support roll
LIU Dong-ye1, SHAO Jian2, HE An-rui2, LIU Peng-yu3, LI Wen-jun3
1. Design and Research Institute Co., Ltd., Beijing University of Science and Technology, Beijing 100083, China; 2. National Engineering Research Center for Advanced Rolling, University of Science and Technology Beijing, Beijing 100083, China; 3. Hot Rolling Factory, Jilin Jianlong Iron and Steel Co., Ltd., Jilin 132104, Jilin, China
Abstract:The distribution of the contact stress between the rollers directly affects the fatigue state and wear state of the rollers,and then affects the service life of the supporting rollers. A two-dimensional finite element model with variable thickness is used to simulate and analyze 54 conditions of different chamfering length and depth under the condition of VCR+ supporting roll shape. The relationship between the peak value of contact stress between rolls and the position under different chamfering conditions is demonstrated,and the chamfering performance reference quantity is proposed to evaluate the influence of chamfering form on roll fatigue failure. Finally,according to the results of the finite element analysis and the wear state of the support roller,the optimization method of chamfering under the condition of VCR+ roll shape is proposed,which provides the theoretical and practical basis for the optimization of chamfering of the support roller on site.
刘东冶, 邵健, 何安瑞, 刘鹏宇, 李文俊. 倒角对变接触支撑辊辊形性能的影响[J]. 钢铁, 2020, 55(12): 56-60.
LIU Dong-ye, SHAO Jian, HE An-rui, LIU Peng-yu, LI Wen-jun. Influence of chamfering on roll shape performance of variable contact-length support roll[J]. Iron and Steel, 2020, 55(12): 56-60.
[1] 何安瑞,曹建国,吴庆海,等. 热轧精轧机组变接触支持辊综合性能研究[J]. 上海金属,2001,23(1):14.(HE An-rui,CAO Jian-guo,WU Qing-hai,et al. Study on comperhensive function of varying contact-length backup roll in finishing mill of hot rolling[J]. Shanghai Metals,2001,23(1):14.) [2] 曹建国. 宽带钢热连轧机粗轧支持辊剥落问题研究[J]. 世界金属导报,2015-05-23(B07).(CAO Jian-guo. Study on the spalling of support roll in roughing of hot strip mill[J]. World Metals Guide Pape,2015-06-23(B07).) [3] 贾生晖,曹建国,谭仁伟. 支持辊"啃边"原因分析及对策措施[C]//中国钢铁年会. 北京:中国金属学会,2005.(JIA Sheng-hui,CAO Jian-guo,TAN Ren-wei. Analyse and counter mearsure on edge scale of backup roll[C]//CSM Steel Congress. Beijing:The Chinese Society for Metals,2005) [4] 张南风,李建华,吴浩鸿,等. 涟钢CSP工作辊与支持辊辊形优化的应用研究[J]. 中国冶金,2012,22(7):34.(ZHANG Nan-feng,LI Jian-hua,WU Hao-hong,et al. Optimization and application of CVC work roll and backup roll contour on CSP line in Lysteel[J]. China Metallurgy,2012,22(7):34.) [5] 孟静,曹汉民,刘超,等. 1 450 mm热连轧机支持辊辊形优化设计[J]. 热处理技术与装备,2016,37(4):58.(MENG Jing,CAO Han-min,LIU Chao,et al. Optimal design for the shape of backup roll in 1 450 mm hot mills[J]. Rechuli Jishu Yu Zhuangbei,2016,37(4):58.) [6] 何安瑞,张清东,张杰,等. 板带钢热轧支持辊不均匀磨损及其解决措施[J]. 上海金属,2000,22(2):19.(HE An-rui,ZHANG Qing-dong,ZHANG Jie,et al. Non-Uniform wear of backup rolls in hot strip rolling and Its solution measurement [J].Shanghai Metals,2000,22(2):19.) [7] 何安瑞. 宽带钢热轧精轧机组辊形的研究[D]. 北京:北京科技大学,2000.(HE An-rui. Study on Roll Contour of Finishing Mill for Wide Strip Steel[D]. Beijing:Beijing University of Science and Technology,2003.) [8] 郝刚刚,邵健,何安瑞,等. CSP末机架支持辊辊形研究[J]. 钢铁研究学报,2010,22(11):15.(HAO Gang-gang,SHAO Jian,HE An-rui,et al. Research on backup roll contour for final stand of CSP[J]. Journal of Iron and Steel Research,2010,22(11):15.) [9] 朱贤斌,袁朝龙,蔡万华. 支承辊倒角对板形控制的研究[J]. 锻压技术,2014,39(3):121.(ZHU Xian-bin,YUAN Chao-long,CAI Wan-hua. Flatness control analysis of chamfer on backup rolls[J]. Forging and Stamping Technology,2014,39(3):127.) [10] 孙大乐,赵建国. 宽带钢轧机支承辊辊形优化设计[J]. 钢铁,2011,46(4):40.(SUN Da-le,ZHAO Jian-guo. Optimum design on profile of backup roll used for wide strip mill[J]. Iron and Steel,2011,46(4):40.)