Effect of high temperature tempering on microstructure of USS122G ultra-high strength stainless steel
BAI Ruo-xin1,2, LIU Zhen-bao2, CAO Jian-chun1, WANG Xiao-hui2
1. School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China; 2. Institute of Special Steels, Central Iron and Steel Research Institute, Beijing 100083, China
Abstract:In order to study the influence of various tempering process on the microstructure and hardness of USS122G ultra-high strength stainless steel. Using SEM,TEM,physicochemical phase analysis,testing and characterization. The results indicated that volume percent of the austenite and the number of second phase reduced with the increased of tempering temperature. When the temperature was 680-700 ℃,the average size of the second phase was about 65 nm. At this time,the strengthening effect of the second phase was smaller and the hardness of the sample was 36HRC-37HRC. At 700 ℃,the second phase aggregated at the grain boundary. When the temperature was higher than 720 ℃,the number of smaller second phase increased. The second phase was distributed in a network along the grain boundary and increased the hardness. The increased in hardness of steel was mainly affected by the strengthening of the second phase. Finally,the optimum tempering temperature of USS122G steel was 660-680 ℃,considering the influences of austenite volume percent,second phase and hardness.
白若昕, 刘振宝, 曹建春, 王晓辉. 高温回火对USS122G超高强度不锈钢显微组织的影响[J]. 钢铁, 2020, 55(12): 81-86.
BAI Ruo-xin, LIU Zhen-bao, CAO Jian-chun, WANG Xiao-hui. Effect of high temperature tempering on microstructure of USS122G ultra-high strength stainless steel[J]. Iron and Steel, 2020, 55(12): 81-86.
[1] 赵先存,宋顺为,杨志勇,等. 高强度超高强度不锈钢[M]. 北京:高等教育出版社,2008. (ZHAO Xian-cun,SONG Shun-wei,YANG Zhi-yong,et al. High Strength and Ultra-high Strength Stainless Steel[M]. Beijing:Higher Education Press,2008.) [2] Pantazopoulos G,Papazoglou T,Psyllaki P,et al. Sliding wear behaviour of a liquid nitrocarburised precipitation-hardening(PH) stainless steel[J]. Surface and Coatings Technology,2004,187(1):77. [3] Agilan M,Venkateswran T,Sivakumar D,et al. Plasma ion nitriding of low carbon stainless maraging steel[J]. Materials Science Forum,2015,830/831:675. [4] 王晓辉,罗海文. 飞机起落架用超高强度不锈钢的研究及应用进展[J]. 材料工程,2019,47(9):1. (WANG Xiao-hui,LUO Hai-wen. Research and application progress in ultra-high strength stainless steel for aircraft landing gear[J]. Journal of Materials Engineering,2019,47(9):1.) [5] 朱晶,姜元军,何大川. 制造船用螺旋桨不锈钢材料的研究进展[J]. 中国冶金,2019,29(7):1. (ZHU Jing,JIANG Yuan-jun,HE Da-chuan. Research development of stainless steel material for manufacturing marine propeller[J]. China Metallurgy,2019,29(7):1.) [6] 刘振宝,杨志勇,雍歧龙,等. 1 900 MPa级超高强度不锈钢的研制[J]. 机械工程材料,2008,32(3):48. (LIU Zhen-bao,YANG Zhi-yong,YONG Qi-long,et al. A 1 900 MPa grade ultra-high strength stainless steel[J]. Materials for Mechanical Engineering,2008,32(3):48.) [7] 王晓辉. USS122超高强度不锈钢热变形行为与强韧化机理的研究[D]. 昆明:昆明理工大学,2015. (WANG Xiao-hui. Hot Deformation Behavior and Strengthening and Toughening Mechanism of USS122G Ultra-High Strength Stainless Steel[D]. Kunming:Kunming University of Science and Technology,2015.) [8] 金国忠,裴和中,刘振宝,等. 铬质量分数对超高强度不锈钢组织与性能的影响[J]. 钢铁,2018,53(9):69. (JIN Guo-zhong,PEI He-zhong,LIU Zhen-bao,et al. Effect of mass percent of chromium on microstructure and properties of ultra high strength stainless steel[J]. Iron and Steel,2018,53(9):69.) [9] 张超,苏杰,梁剑雄,等. 超高强度不锈钢沉淀行为研究进展[J]. 钢铁,2018,53(4):48. (ZHANG Chao,SU Jie,LIANG Jian-xiong,et al. Research development of precipitation behavior of ultra high strength stainless steels[J]. Iron and Steel,2018,53(4):48.) [10] 程建华,沈俊昶,何宜柱,等.两 相区热处理工艺对9 NiCrMo钢强韧性的影响[J]. 钢铁,2014,49(9):87. (CHENG Jian-hua,SHEN Jun-chang,HE Yi-zhu,et al. Effect of quenching,lamellarizing and tempering process on strength and toughness of 9 NiCrMo steel[J]. Iron and Steel,2014,49(9):87.) [11] 赵振业,李春志,李志,等. 一种超高强度不锈齿轮钢强化相研究[J]. 航空材料学报,2003(1):1. (ZHAO Zhen-ye,LI Chun-zhi,LI Zhi,et al. Study on the strengthening phase in a ultra-high ptrength stainless gear steel[J]. Journal of Aeronautical Materials,2003(1):1.) [12] 刘振宝,杨志勇,雍岐龙,等. 新型Cr-Co-Ni-Mo系马氏体时效不锈钢的强韧化机理[J]. 钢铁研究学报,2008,20(5):27. (LIU Zhen-bao,YANG Zhi-yong,YONG Qi-long,et al. Strengthening-toughening mechanism of an Cr-Co-Ni-Mo ultra-high strength maraging stainless steel[J]. Journal of Iron and Steel Research,2008,20(5):27.) [13] 刘宗昌,李文学,高占勇,等. 钢的退火软化机理[J]. 包头钢铁学院学报,1998(3):14. (LIU Zong-chang,LI Wen-xue,GAO Zhan-yong,et al. Mechanism of annealing softening of the steels[J]. Journal of Baotou University of Iron and Steel Technology,1998(3):14.)