Optimal control of work roll shifting in tandem cold rolling mill based on multi-objective optimization
SONG Jun1,2, REN Ting-zhi1, WEI Zhen3, LIU Bao-quan2, WANG Kui-yue2, SONG Bao-yu2
1. Education Ministry Engineering Research Center of Rolling Equipment and Complete Technology, Yanshan University, Qinhuangdao 066004, Hebei, China; 2. Ansteel Beijing Research Institute Co., Ltd., Beijing 102211, China; 3. The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China
Abstract：In order to solve the problem that on-line shifting of work roll and shape of work roll cone section often cause strip breaking when continuous two coils are flying gauge change and the mill is in high speed continuous production. Based on the multi-objective optimization theory, the multi-objective function of the work roll shifting was constructed and the optimal roll shifting interval under different roll shapes was calculated, the edge drop control effect of tandem cold mill was improved. At the same time, according to the dynamic compensation control of work roll shifting speed, the optimal control value of roll shifting speed under different rolling force conditions was determined to reduce the influence of roll wear and axial force, ensure the stability of the high-speed rolling process, reduce the times of strip breaking in the process of work roll shifting, and improve the mill operating rate and product quality.
宋君, 任廷志, 魏臻, 刘宝权, 王奎越, 宋宝宇. 基于多目标优化的冷连轧工作辊窜辊优化控制[J]. 钢铁, 2021, 56(9): 102-109.
SONG Jun, REN Ting-zhi, WEI Zhen, LIU Bao-quan, WANG Kui-yue, SONG Bao-yu. Optimal control of work roll shifting in tandem cold rolling mill based on multi-objective optimization[J]. Iron and Steel, 2021, 56(9): 102-109.
[1] CHEN Shu-zong,ZHANG Xin,PENG Liang-gui. Multi-objective optimization of rolling schedule based on cost function for tandem cold mill[J].Journal of Central South University.2014,21(5):1733. [2] 刘亚星,张佳胜,白振华. 二次冷轧机组带钢下表面润滑工艺补偿技术[J]. 钢铁,2020,55(7):85.(LIU Ya-xing,ZHANG Jia-sheng,BAI Zhen-hua. Compensation technology of lubrication process for bottom of strip in double cold rolling unit[J]. Iron and Steel,2020,55(7):85.) [3] 崔亚亚,白振华,崔熙颖,等. 六辊轧机冷轧过程边部减薄预报模型[J].钢铁,2018,53(1):46.(CUI Ya-ya,BAI Zhen-hua,CUI Xi-ying, et al. Strip edge drop prediction model of six-high cold rolling mill[J]. Iron and Steel,2018,53(1):46.) [4] 沈新玉,胡柯,李宏洲,等. UCM冷连轧机边降控制工作辊辊形优化[J].中国冶金,2019,29(11):55.(SHEN Xin-yu,HU Ke,LI Hong-zhou, et al. Work roll contour optimization for edge drop control based on UCM cold rolling mills[J]. China Metallurgy,2019,29(11):55.) [5] 闻成才,王立兵,刘强,等. 1 580 mm精轧机组大凹辊控制硅钢板形的研究及实践[J].中国冶金,2019,29(1):56.(WEN Cheng-cai,WANG Li-bing,LIU Qiang, et al. Research and practice on controlling of shape of silicon steel plate by large concave roll in hot rolling 1 580 mm finishing mill[J]. China Metallurgy,2019,29(1):56.) [6] 杨光辉,张高尚,张杰,等. 2 180 mm超宽六辊CVC冷轧机SMS-EDC边降控制特性[J].钢铁,2018,53(5):52.(YANG Guang-hui,ZHANG Gao-shang,ZHANG Jie, et al. SMS-EDC edge control characteristics of 2 180 mm super-wide 6-high CVC cold rolling mill[J]. Iron and Steel,2018,53(5):52.) [7] 任新意,王松涛,高慧敏,等. 冷连轧机ESS辊型板形控制性能分析[J].钢铁,2018,53(3):50.(REN Xin-yi,WANG Song-tao,GAO Hui-min, et al. Analysis on shape control performance of cold tandem mill with ESS roll profile[J]. Iron and Steel,2018,53(3):50.) [8] CAO J,CHAI X,LI Y,et al. Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills[J]. Journal of Materials Processing Technology, 2018, 252: 432. [9] FENG X,WANG X,SUN J,et al. Analysis of tapered work roll shifting technique in 5-stand UCMW tandem cold rolling process[J]. Australian Journal of Mechanical Engineering, 2019, 13(2): 1. [10] 张岩,高健,吴鲲魁,等.单锥度辊冷轧机边部减薄控制应用研究[J]. 冶金自动化,2016,40(1):45.(ZHANG Yan,GAO Jian,WU Kun-kui, et al. Application research for edge drop control on cold mill of single taper roll[J]. Metallurgical Industry Automation,2016,40(1):45.) [11] 于斌,王义栋,杨旭,等. 面向板形控制的辊型窜辊与弯辊技术应用[J].钢铁,2014,49(11):42.(YU Bin,WANG Yi-dong,YANG Xu, et al. Application of roll contour shifting roll and bending roll for shape control[J]. Iron and Steel,2014,49(11):42.) [12] 杨荃. 宽带钢轧机板形控制技术的进展和创新的解决方案[J].钢铁,1997,32(10): 861.(YANG Quan. The progress and new solutions of shape control in wide strip mill[J]. Iron and Steel,1997,32(10): 861.) [13] Polyblank J A,Allwood J M,Duncan S R. Closed-loop control of product properties in metal forming: A review and prospectus[J]. Journal of Materials Processing Technology, 2014, 214(11): 2333. [14] Pin G,Francesconi V,Cuzzola F A,et al. Adaptive task-space metal strip-flatness control in cold multi-roll mill stands[J]. Journal of Process Control, 2013, 23(2): 108. [15] Rout M, Pal S K, Singh S B. Finite element simulation of a cross rollingprocess[J]. Journal of Manufacturing Processes, 2016, 24: 283. [16] 张殿华,王鹏飞,刘佳伟,等. UCM轧机中间辊横移控制模型与应用[J].钢铁,2010,45(2): 53.(ZHANG Dian-hua,WANG Peng-fei,LIU Jia-wei, et al. Models and application for intermediate roll shifting control of UCM cold mill[J]. Iron and Steel,2010,45(2): 53.) [17] 张云锦,邵健,姚驰寰. 马钢热轧CSP锥辊使用技术[J]. 中国冶金,2017,27(9): 41.(ZHANG Yun-jin,SHAO Jian,YAO Chi-huan. Application of asymmetric taper roller in Masteel CSP hot rolling[J]. China Metallurgy,2017,27(9): 41.)
2021, Vol. 56 
