Optimal setting technology of process lubrication system for 3+1 emulsion system
LI Xue-tong1,2, SUN Ye-xuan1, LIU Ya-xing1, REN Ming-hua1, TAN Chao-chao1, JIA Wen-qiang1
1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China; 2. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China
Abstract：In order to study the quality difference between the upper surface and the lower surface of the cold-rolled strip due to insufficient lubrication,over-lubrication and insufficient cooling in the rolling deformation zone to produce stainless steel products with a 3+1 emulsion system,a certain steel the newly-built six-stand tandem cold rolling mill is the research object. From the perspective of emulsion process lubrication,the layout of the 3+1 type emulsion process lubrication system of the mill is introduced,and the influence of process lubrication system parameters on rolling stability is analyzed. factor. By revealing the intrinsic relationship between the concentration,temperature and flow rate of the emulsion and the dynamic viscosity of the lubricating oil film,a model of the relationship between the emulsion process lubrication system and the thickness of the lubricating oil film was established;further,starting from the friction heat and deformation heat,combined with the convective heat transfer mechanism of heat transfer,established the relationship model of emulsion process lubrication system and cooling effect; and based on this,established the relationship model of process lubrication system,slip and thermal slip. With the goal of maximizing the comprehensive control of the rolling stability of the upper surface of the strip,the stability of the lower surface of the rolling,the difference in lubrication of the upper and lower surfaces of the strip,and the cooling effect of the emulsion,the process of the 3+1 emulsion system has been developed. The comprehensive optimization setting technology of the lubrication system realizes the quantitative optimization of the emulsion concentration,temperature and flow rate of the 3+1 type emulsion system. This technology has been promoted and applied to a six-stand tandem cold rolling mill in a steel plant. The application results show that the optimization method fully exploits the overall lubrication and cooling capacity of the 3+1 emulsion system and ensures that the six-stand tandem cold rolling mill The rolling stability of each stand greatly reduces the difference in the quality of the upper and lower surfaces of stainless steel products,creates greater economic benefits for the site,and has the value of further popularization and application.
李学通, 孙业选, 刘亚星, 任明华, 谭超超, 贾文强. 3+1型乳化液系统工艺润滑制度优化设定技术[J]. 钢铁, 2022, 57(1): 110-118.
LI Xue-tong, SUN Ye-xuan, LIU Ya-xing, REN Ming-hua, TAN Chao-chao, JIA Wen-qiang. Optimal setting technology of process lubrication system for 3+1 emulsion system[J]. Iron and Steel, 2022, 57(1): 110-118.
[1] 王小兰. 近5年中国汽车轻量化进展探究[J]. 汽车文摘,2021(2):30.(WANG Xiao-lan. Research on the development of automobile lightweight in China in recent five years[J]. Car Digest,2021(2):30.) [2] WANG Fang-ying,LIANG Ya-ting,ZHAO Ou,et al. Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing,numerical modelling and design[J]. Engineering Structures, 2021, 228(2):118414. [3] GUO You-dan. High-strength steel hot forming mechanics performance and characteristic experimental study[J]. Key Engineering Materials, 2016, 693(5):800. [4] 冷焕辉,刘振宝,梁剑雄,等. 多向锻造对超高强度不锈钢组织及力学性能的影响[J]. 中国冶金,2021,31(6):26.(LENG Huan-hui,LIU Zhen-bao,LIANG Jian-xiong,et al. Effect of multiple-direction forging on microstructure and mechanical properties of ultra-high strength stainless steel[J]. China Metallurgy,2021,31(6):26.) [5] 陈祎,曹先常,陆方,等. 金属材料在轧钢加热炉低温烟气中的耐腐蚀特性[J]. 冶金能源,2015,34(6):35.(CHEN Yi,CAO Xian-chang,LU Fang,et al. Corrosion resistance characteristics of different metal materials in flue gas of rolling steel heating furnace[J]. Energy for Metallurgical Industry,2015,34(6):35.) [6] 曹呈祥,崔怀周,梁强,等. Mn18Cr18 N高氮奥氏体不锈钢的冶炼工艺[J]. 中国冶金,2021,31(5):98.(CAO Cheng-xiang,CUI Huai-zhou,LIANG Qiang,et al. Smelting process of Mn18Cr18 N high nitrogen austenitic stainless steel[J]. China Metallurgy,2021,31(5):98.) [7] 张壮,杨春光,赵金龙,等. 含铜铁素体不锈钢抑制食品腐败的作用[J]. 上海金属,2020,42(6):88.(ZHANG Zhuang,YANG Chun-guang,ZHAO Jin-long,et al. Function of copper-bearing ferritic stainless steel in inhibiting food spoilage[J]. Shanghai Metals,2020,42(6):88.) [8] 赵天天,滕铝丹,金洋帆,等. 适用于汽车排气歧管的含铌铁素体不锈钢的组织与力学性能[J]. 上海金属,2020,42(2):63.(ZHAO Tian-tian,TENG Lu-dan,JIN Yang-fan,et al. Microstructures and mechanical properties of niobium-containing ferritic stainless steel suitable for automobile exhaust manifold[J]. Shanghai Metals,2020,42(2):63.) [9] 梁婉怡,胡丽娟,董海英,等. 夹杂物对316L不锈钢初期点蚀影响的数值模拟[J]. 上海金属,2019,41(2):35.(LIANG Wan-yi,HU Li-juan,DONG Hai-ying,et al. Numerical simulation on effect of inclusions on early stage pitting corrosion of 316L stainless steel[J]. Shanghai Metals,2019,41(2):35.) [10] Ömer Necati Cora,Muammer Koç. Experimental investigations on wear resistance characteristics of alternative die materials for stamping of advanced high-strength steels(AHSS)[J]. International Journal of Machine Tools and Manufacture, 2009, 49(12):897. [11] 孙荣生,王植,王静,等.冷轧先进高强钢酸轧机组生产技术研究[J]. 鞍钢技术,2020(6):23.(SUN Rong-sheng,WANG Zhi,WANG Jing,et al. Study on production technology of cold rolling advanced high strength steel by pickling and cold rolling mill unit[J]. Angang Technology,2020(6):23.) [12] 程志彦,崔熙颖,刘云峰,等.冷连轧以辊耗控制为目标的润滑制度优化技术[J]. 钢铁,2020,55(12):61.(CHENG Zhi-yan,CUI Xi-ying,LIU Yun-feng,et al. Optimization technology of technological lubrication with roll consumption control in cold rolling process[J]. Iron and Steel,2020,55(12):61.) [13] 刘亚星,张佳胜,白振华,等. 二次冷轧机组带钢下表面润滑工艺补偿技术[J]. 钢铁,2020,55(7):85.(LIU Ya-xing,ZHANG Jia-sheng,BAI Zhen-hua,et al. Compensation technology of lubrication process for bottom of strip in double cold rolling unit[J]. Iron and Steel,2020,55(7):85.) [14] 李军. 冷轧乳化液杂油含量的控制措施[J]. 轧钢,2020,37(5):89.(LI Jun. Control measures of miscellaneous oil content in emulsion for cold rolling[J]. Steel Rolling,2020,37(5):89.) [15] 刘超智,李鹏,雷彤,等. 双机湿平整工艺润滑对带钢表面粗糙度的影响及其控制研究[J]. 塑性工程学报,2020,27(5):149.(LIU Chao-zhi,LI Peng,LEI Tong,et al. Study on effect of lubrication on surface roughness of strip and its control in double-stand wet temper process[J]. Journal of Plasticity Engineering,2020,27(5):149.) [16] 白振华,崔亚亚,李秀军,等.二次冷轧机组乳化液管路直接混合润滑系统开发[J]. 钢铁,2020,55(1):56.(BAI Zhen-hua,CUI Ya-ya,LI Xui-jun,et al. Development of emulsion pipeline direct mixed lubrication system in double cold reduction mill[J]. Iron and Steel,2020,55(1):56.) [17] 李秀军,崔亚亚,白振华. 二次冷轧机组乳化液体积分数在线控制技术[J]. 钢铁,2019,54(9):79.(LI Xiu-jun,CUI Ya-ya,BAI Zhen-hua. Online control technology of emulsion volume percent in double cold reduction mill[J]. Iron and Steel,2019,54(9):79.) [18] 刘学良,柯于军,潘东远. 高速冷连轧过程中乳化液流量的优化控制[J]. 轧钢,2019,36(1):46.(LIU Xue-liang,KE Yu-jun,PAN Dong-yuan. Optimization control of emulsion flow during high-speed cold rolling[J]. Steel Rolling,2019,36(1):46.) [19] 孙建林,康永林,刘杰. 带钢冷轧润滑形膜的特征[J]. 钢铁研究学报,2001,13(1):10.(SUN Jian-lin,KANG Yong-lin,LIU Jie. Characteristics of the lubricating film for cold rolling of strip steel[J]. Journal of Iron and Steel Research,2001,13(1):10.) [20] 陈建华,张其生,李冰,等.中厚板轧机油膜厚度模型的研究[J]. 钢铁,2001,36(11):42.(CHEN Jian-hua,ZHANG Qi-sheng,LI Bing,et al. Research on oil film thickness model of plate mill[J]. Iron and Steel,2001,36(11):42.) [21] 白振华,陈浩,高明磊,等. 冷连轧机组划痕缺陷产生机制及治理措施[J]. 钢铁,2014,49(6):59.(BAI Zhen-hua,CHEN Hao,GAO Ming-lei,et al. Scratch defect generation mechanism and treatment measures of tandem cold rolling mill[J]. Iron and Steel,2014,49(6):59.) [22] 齐海峰,张晓峰,唐伟,等. 极薄板高速轧制热划伤缺陷控制技术[J]. 中国冶金,2020,30(1):79.(QI Hai-feng,ZHANG Xiao-feng,TANG Wei,et al. Control technology of hot scratch defect in extremely thin plate high speed rolling[J]. China Metallurgical,2020,30(1):79.) [23] 白振华. 冷连轧机高速生产过程核心工艺数学模型[M]. 北京:机械工业出版社,2009.(BAI Zhen-hua. The Core Process Mathematical Model of the High-Speed Production Process of the Cold Tandem Mill[M]. Beijing: Machinery Industry Press,2009.) [24] 冯帆,彭良贵,张殿华. 冷轧带钢温度演变及影响因素研究[J]. 轧钢,2019,36(5):28.(FENG Fan,PENG Liang-gui,ZHANG Dian-hua. Research on temperature evolution and influencing factors of cold rolled strip steel[J]. Steel Rolling,2019, 36(5):28.)
2022, Vol. 57 
