COREX竖炉结瘤对物料运动行为影响的DEM模拟

doi:10.13228/j.boyuan.issn0449-749x.20190129

Abstract
Figure/Table
References
Related Citation (12)

Download: PDF (11226 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A three-dimensional DEM-based model was used to investigate the effect of scaffolding on the burden behavior such as the solid flow pattern and the interactive force in COREX shaft furnace. The improvement of the discharge rate on the solid flow under scaffolding conditions was also explored. The results confirm that the scaffolding occurred near the bustle pipe zone would directly affect the movement trajectory of the burden, resulting in the changes of solid flow pattern. Meanwhile, the interactive force was increased obviously compared to the normal condition. The solid flow pattern was also changed significantly when the scaffolding was generated in the guiding cone, and the particle segregation can be observed under the scaffolding. Comparing with the condition where scaffolding was generated near the bustle pipe zone, the interactive force was enhanced further. The force between the particles was decreased dramatically by increasing the speed of screw under the scaffolding, and the probability density distribution of interactive force shows a similar tendency as the normal condition. The findings of this work can provide guidance and theoretical basis for the optimized operation of COREX shaft furnace.

Key words： COREX shaft furnace discrete element method solid flow pattern interactive force

Received: 08 April 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DU Bin-bin
	WU Sheng-li
	ZHOU Heng
	KOU Ming-yin

Cite this article:

DU Bin-bin,WU Sheng-li,ZHOU Heng等. Effect of scaffolding on solid flow in COREX shaft furnace by discrete element simulation method[J]. Iron and Steel, 2020, 55(1): 12-19.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20190129 OR http://www.chinamet.cn/Jweb_gt/EN/Y2020/V55/I1/12

[1] 周渝生. 煤基熔融还原炼铁新工艺开发现状评述[J]. 钢铁, 2005, 40(11):1.(ZHOU Yu-sheng. Review of current development of coal-based smelting reduction ironmaking process[J]. Iron and Steel, 2005, 40(11): 1.)
[2] Anameric B, Kawatra S K. Direct iron smelting reduction processes[J]. Mineral Processing and Extractive Metallurgy Review, 2008, 30(1): 1.
[3] ZHOU Heng, WU Sheng-li, KOU Ming-yin, et al. Discrete particle simulation of solid flow in a large-scale reduction shaft furnace with center gas supply device[J]. ISIJ International, 2018, 58(3): 422.
[4] ZHANG Hui-ming, ZHOU Zou-yan, YU A B, et al. Discrete particle simulation of solid flow in a melter-gasifier in smelting reduction process[J]. Powder Technology, 2017, 314: 641.
[5] 李维国. COREX-3000生产现状和存在问题的分析[J]. 宝钢技术,2008,6:11.(LI Wei-guo. Operation status quo and technical problems of COREX-3000[J]. Baosteel Technology, 2008, 6: 11.)
[6] 刘起航,张亚楠,折媛,等. 熔融气化炉内块煤裂解特性的差异化分析[J]. 中国冶金, 2017, 27(2): 12. (LIU Qi-hang,ZHANG Ya-nan,SHE Yuan,et al. Differential analysis of lump coal pyrolysis characteristics in melting gasifier[J].China Metallurgy, 2017, 27(2): 12. )
[7] Lee Y J. A scaled model study on the solid flow in a shaft type furnace[J]. Powder Technology, 1999, 102(2): 194.
[8] ZHOU Heng, LUO Zhi-guo, ZOU Zong-shu, et al. Experimental study on burden descending behavior in COREX shaft furnace with AGD beams[J]. Steel Research International, 2015, 86 (9): 1073.
[9] KOU Min-ying, WU Sheng-li, DU Kai-ping, et al. DEM simulation of burden distribution in the upper part of COREX shaft furnace[J]. ISIJ International, 2013, 53(6): 1002.
[10] ZHOU Z Y, ZHU H P, YU A B, et al. Discrete particle simulation of solid flow in a model blast furnace[J]. ISIJ International, 2005, 45(12): 1828.
[11] Zhou Z Y, Zhu H P, Wright B, et al. Gas-solid flow in an ironmaking blast furnace-II: Discrete particle simulation[J]. Powder Technology, 2011, 208: 72.
[12] Yu Yao-wei, Westerlund A, Paananen T, et al. Inter-particle percolation segregation during burden descent in the blast furnace[J]. ISIJ International, 2011, 51(7): 1050.
[13] 刘颖,李正一,狄瞻霞,等. 还原条件对COREX球团显气孔率和金属化率的影响[J].钢铁 , 2018, 53(2): 10. (LIU Ying,LI Zheng-yi,DI Zhan-xia,et al. Effects of reducing condition on apparent porosity and metallization degree of COREX pellets[J].Iron and Steel , 2018, 53(2): 10. )
[14] Hou Qi-fu, Samman M, Li J, et al. Modeling the gas-solid flow in the reduction shaft of COREX[J]. ISIJ International, 2014, 54(8): 1772.
[15] LI H F, ZHOU H, LUO Z G, et al. Three dimensional DEM simulation of the effect of bottom structure on solid flow in COREX shaft furnace[J]. Canadian Metallurgical Quarterly, 2016, 55(1): 112.
[16] QIU Zi-long, LUO Zhi-guo, ZHOU Heng, et al. Effect of screw casing structure on descending of burdens in COREX shaft furnace [J]. Journal of Iron and Steel Research, International, 2017, 24(1): 18.
[17] BAI M H, HAN S F, ZHANG W Y, et al. Influence of bed conditions on gas flow in the COREX shaft furnace by DEM-CFD modelling[J]. Ironmaking Steelmaking, 2017, 44(9): 685.
[18] ZHOU Heng, LUO Zhi-guo, ZHANG Tao, et al. Analyses of solid flow in COREX shaft furnace with AGD by discrete element method [J]. Ironmaking Steelmaking, 2015, 42(10): 774.
[19] ZHOU Heng, LUO Zhi-guo, ZHANG Tao, et al. DEM study of solid flow in COREX shaft furnace with areal gas distribution Beams[J]. ISIJ International, 2016, 56(2): 245.
[20] ZHU H P, ZHOU Z Y, YANG R Y, et al. Discrete particle simulation of particulate systems: A review of major applications and findings[J]. Chemical Engineering Science, 2008, 63(23): 5728.
[21] HOU Qi-fu, LI Jian, YU Ai-bing. CFD-DEM Study of heat transfer in the reduction shaft of COREX[J]. Steel Research International, 2015, 86(6): 626.
[22] YOU Yang, LUO Zhi-guo, LI Hai-feng, et al. Effects of the shape and inclination angle of DRI-flaps on DRI distribution in COREX melter gasifiers[J]. Powder Technology, 2018, 339: 854.
[23] YOU Yang, LUO Zhi-guo, HOU Qing-fu, et al. Experimental study of burden distribution in the COREX melter gasifier [J]. Steel Research, International, 2017, 88(11): 1.
[24] 徐宽,白明华. 竖炉内颗粒、空隙率及气流分布模拟[J]. 钢铁,2017,52(7):27. (XU Kuan, BAI Ming-han. Numerical simulation of burden, porosity and gas distributions inside shaft furnace[J]. Iron and Steel, 2017, 52(7): 27.)
[25] 马富涛,张建良,刘云彩. 基于人工智能算法的高炉布料数值模拟[J]. 钢铁,2017,52(6):18. (MA Fu-tao, ZHANG Jian-liang, LIU Yun-cai. BF burden distribution numerical simulation based on genetic algorithm[J]. Iron and Steel, 2017, 52(6): 18.)