|
|
Design of Roll Shape for Temper Mill of Hot Galvanizing Line |
LI Junhong1,FAN Hua2,LI Weidong2 |
1. Panzhihua Iron and Steel Research Institute, Panzhihua 617000, Sichuan, China; 2. Cold Rolling Mill,Panzhihua New steel and Vanadium Co.,Ltd.,Panzhihua 617000, Sichuan, China |
|
|
Abstract The shape and surface quality are important quality index of skinpassed galvanized strip. According to the characteristics of technology of skinpassed galvanized strip, a mathematic model to design the shape of rolls on temper mill was established.In this model, the uniform distribution of front tension is taken as the objective.The model has been used to design the shape of rolls temper mill at Panzhihua Steel. The test results indicated that the new rolls improve the control of work roll bending and the homogeneity of rolling pressure and improve the quality of skinpassed galvanized strip.
|
Received: 01 January 1900
|
|
|
|
[1] |
QIN Da-wei, LIU Hong-min, ZHANG Dong, WANG Jun-sheng. Prediction models of coating mass per unit area for hot-dip galvanized strip based on artificial neural network[J]. Iron and Steel, 2020, 55(5): 68-72. |
[2] |
ZHENG Zhong, WANG Yong-zhou, LU Yi, GAO Xiao-qiang. Intelligent optimization model and system of plate and slab design of medium steel plate[J]. Iron and Steel, 2020, 55(4): 53-59. |
[3] |
CAO Guang- ming,LI Zhi- feng,WANG Hao,LIU Zhen- yu. Progress of pickling- free reductive annealing hot- dip galvanization on hot- rolled steel[J]. , 2019, 31(2): 159-167. |
[4] |
KE Jiang-jun,HU Hai-jiang,XU Guang,YUAN Qing. Analysis of the mechanism of sliver-type embossment defect on the surface of cold rolled hot galvanized sheet[J]. , 2019, 37(1): 32-35. |
[5] |
MA Li-dong,,HUANG Qing-xue,,CHEN Shuo,MA Hao-xi. Optimization of varying curvature profile of two-roll bar straightener[J]. Iron and Steel, 2018, 53(9): 45-52. |
[6] |
ZHANG Zi-yue,YU Gang-qiang,JIANG She-ming,GAO Zhi-qiang,LIU Xin. Effect of molybdate and borate on vanadate conversion film in hot galvanizing[J]. Iron and Steel, 2018, 53(8): 96-101. |
|
|
|
|