|
|
Sulfur’s Existence Form and SulfPhase Forming Mechanism in Solidified Refining Slag |
HE Huanyu1,NI Hongwei1,GAN Wangui2,LIN Lu1 |
1.Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China;2.The Metallurgical Slag Company of WISCO, Wuhan 430082, Hubei, China |
|
|
Abstract The process of the phase separation and sulfur’s existence as well as the sulfphase forming mechanism in solid refining slag were studied by means of micro and thermodynamics analysis. In the conditions of rapid cooling, the phases were separated completely, the forming sequence of phases was related to their thermodynamic equilibrium temperature, and the calciumaluminate was formed as basic phase due to its lower melting temperature. The forming mechanism of phases accorded with CaOSiO2Al2O3 phase diagram. The sulfur was enriched in the basic phase during separation forming complex phases at the boundaries with other elements of low melting temperature. The S2- and Ca2+ with lower electrostatic potential in complex sulfphases formed CaS, which carries replacement reaction with the basic phase to form calciumaluminate sulphide.
|
Received: 01 January 1900
|
|
|
|
[1] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[2] |
HE Zhan-wei, XUE Xiang-xin. Basic sintering characteristics of several typical vanadium titanium magnetite[J]. Iron and Steel, 2020, 55(5): 20-25. |
[3] |
ZENG Ze-yun, LI Chang-rong, LI Zhi-ying, LIU Zhan-lin,LI Zheng-song, ZHAI Yong-qiang. Thermodynamic analysis of titanium precipitation in HRB500E seismic steel[J]. Iron and Steel, 2020, 55(5): 45-51. |
[4] |
WU Xiang-yu, HE Yu-dong, WU Liang-ping, SHEN Ping, FU Jian-xun. Effect of magnesium modification on sulfides in Y1Cr13 free-cutting stainless steel[J]. Iron and Steel, 2020, 55(4): 68-74. |
[5] |
ZHANG Wei-li1,WU Sheng-li1,HU Zhong-jie1,2. Statistical analysis of factors affecting desulfurization rate of activated coke for sintering flue gas[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 281-288. |
[6] |
ZHOU Qi-qi1,LI Ji-peng1,2,CHENG Shu-sen1,LIU Kai1,LIU Zhao1. Application of IMCT model and KTH model in S50C steel desulfurization practice[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 297-303. |
|
|
|
|