|
|
|
| Purification of Molten Steel Produced Large Section Cast Steel Ingot Used by Steel and Iron with Slag |
| |
|
|
|
|
Abstract Qualified cast ingot of large transect, produced by steel and iron with slag, can be used to make solid waste are fully utilized. The key issue was to reduce the amount of Non-metallic inclusions in molten steel. It was carried on the experiment and the analysis for the system of the refining slag ingredient、pre-deaeration and blowing the Argon fining craft by adopting EBT+LF+Die Casting craft. The result indicated that applying CaO-Al2O3-SiO2-MgO slag with appropriate alkalinity and dregs quantity to slagging and then pre-deaerating by the alloy of SiAlBaCa(addition:1.2kg/t steel), blowing the Argon in different period of fining craft with different flow and time. After treatment, T[0] content in steel has been reduced below 40ppm, the amount of inclusions in steel, especially large granular inclusions(D≥50~80μm) decreased more than 50%. The steel ingot casting qualified rate from 85.7% enhanced to 100%.
|
|
Received: 23 March 2009
|
|
|
|
| [1] |
DU Yun-cong1,YI Yuan-rong1,2,3,BAI Shu-qi1,MA Zhong-le1,FANG Ming-hang1,MA Wen-qing1. Change of Ca occurrence state in carbonation process of LF refining slag[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(3): 195-203. |
| [2] |
PAN Xiaoqian，YANG Jian，ZHI Jianjun，WANG Ruizhi，FAN Zhengjie，XU Longyun. Evolution of inclusions in steelmaking process for #br# ultra low carbon BH auto exposed panel[J]. Iron and Steel, 2019, 54(8): 48-57. |
| [3] |
LI Muming，YU Huixiang，PAN Ming，BAI Hao. Effect of refining slag on nonmetallic inclusions in #br# high manganese steel[J]. Iron and Steel, 2019, 54(6): 37-42. |
| [4] |
KANG Wei1， JIN You-lin2. Inclusions control in anti-fatigue stress steel[J]. Iron and Steel, 2019, 54(5): 27-31. |
| [5] |
CHEN Xingrun1,HAN Shaowei2,GUO Jing2,PAN Jixiang1. Inclusion evolution of 304 stainless steel produced with #br#
different LF refining slag basicity[J]. Iron and Steel, 2019, 54(11): 40-48. |
| [6] |
CHEN Yu-xin，CHEN Feng，WEN Han，WANG Chao-bin. Low silicon control for steel grades with low sulphur mass percent[J]. Iron and Steel, 2018, 53(7): 60-67. |
|
|
|
|
2010, Vol. 45 
