|
|
|
| A New Control Scheme for Hydraulic Rolling Mill |
| LI Yong,WANG Jun,HU Xianlei,LIU Xianghua,WANG Guodong |
| State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China. |
|
|
|
|
Abstract Aiming at the typical electrohydraulic position servo system of hydraulic screw down of rolling mill, the merits and demerits of both PID control and repetitive control for the AGC compensation and roll eccentricity compensation are analyzed, then a novel multiple control scheme is presented,based on the PID control with inserted repetitive control. The structure of the new system and the method of important parameters tuning are described. The results show, that the structure of the proposed control scheme is simple; new control scheme can be easily designed and realized; dynamic and steady characteristics of the system are quite good; the novel system can realize the efficient and highly accurate compensation of AGC and roll eccentricity.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
LI Bo-qun1， FAN Xuan1， LI Wei-hong1,ZHANG Da-qing1， FAN Chui-lin2. Parameter optimization of shape setting model and application of control technology[J]. Iron and Steel, 2019, 54(2): 41-47. |
| [2] |
LI Feng- ji,LIU Hong- fei,ZHANG Xing. On- line identification of roll eccentricity based on PSO- RBF neural network[J]. , 2017, 29(11): 906-911. |
| [3] |
LI Zhong-de,XU Xiang-yu,CUI Gui-mei,LI Ai-lian. Control of roll eccentricity compensation based on EEMD[J]. Chinese Journal of Iron and Steel, 2016, 28(10): 15-21. |
| [4] |
FENG Ying-ying1,LUO Zong-an1,ZHANG Dian-hua1,SU Hai-long1,WANG Li-jun2. Optimization of Fuzzy Control Strategy for Temperature Control of Weld Thermal Simulation[J]. Chinese Journal of Iron and Steel, 2012, 24(04): 58-62. |
| [5] |
Meng SUN Ye-ting Wang Hou-fa SHEN. Dynamic Secondary Cooling of Continiuous Slab Casting by Incremental PID Control[J]. Iron and Steel, 2011, 46(1): 34-34. |
| [6] |
YANG Yue-Biao. Development and Application of Dynamic Secondary Cooling Control Model in Continuous Casting[J]. Iron and Steel, 2010, 45(9): 48-48. |
|
|
|
|
2007, Vol. 42 
