|
|
Effect of Different Bottom Blowing Locations on Decarburization Process in Vacuum Degasser |
GENG Dian-Qiao Ji-Cheng HE |
|
|
|
Abstract The numerical simulation method was employed to study the effect of different bottom blowing locations on fluid flow and decarburization process in vacuum degasser. The numerical results indicated that the double bottom blowing is the most effective method for decarbonization, the eccentric bottom blowing has a minor effect, and the centric bottom blowing is the poorest method. For the eccentric bottom blowing, the decarbonization efficiency is the highest and the terminal carbon concentration falls down to 39ppm when the eccentric distance of bottom blowing location is between 0.4R~0.5R. For double bottom blowing, the decarbonization efficiency is the highest and the terminal carbon concentration falls down to 25ppm when the eccentric distance of bottom blowing location is between 0.5R~0.65R. Furthermore, the terminal carbon concentration on the condition of double bottom blowing is 18~45 percent lower than that on the condition of eccentric bottom blowing.
|
Received: 05 January 2009
|
|
|
|
[1] |
DAI Jing-xin1,DING Xue-yong1,XU Hai-fa2,LIU Cheng-hong1,JU Tian-hua1. Numerical simulation of conveying characteristics of dense phase pulverized coal in bend pipe[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 377-385. |
[2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[3] |
Shuang-jiang Li. Numerical simulation of the effect of nozzle nodule on the behavior of molten steel in slab continuous casting mold[J]. , 2020, 45(3): 0-0. |
[4] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
[5] |
CHEN Xu-ling, ZHENG Ru-yue, FAN Xiao-hui, GAN Min, HUANG Xiao-xian, JI Zhi-yun. Numerical simulation model of temperature and NOx emission in flue gas circulating sintering process[J]. Iron and Steel, 2020, 55(2): 23-30. |
[6] |
LIN Peng,ZHANG Hong-cai,LIU Ying,XU Zheng-zhou. Cause analysis of surface crack defects of gear steel 20CrNiMo rolled product[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(2): 40-. |
|
|
|
|