|
|
Study on Dynamic Recrystallization of Ferrite in UltraLow Carbon IF Steel |
XU Guang1,XU Chushao2,ZHAO Jiarong1,LIU Xianjun1,XIONG Junwei1 |
1.College of Materials and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China; 2. College of Material Science and Engineering, Chongqing University, Chongqing 400044, China |
|
|
Abstract The study on deformation of ultralow carbon steel in ferrite region was carried out on Thermecmaster hot simulator and the condition for dynamic recrystallization(DRX) obtained is that the strain rate should be less than 1 s-1 for steel deformed at a temperature of 850 ℃. A dynamic recrystallization model for ferrite was deduced based on experimental results. The predicted values by dynamic recrystallization model are in agreement with test results.
|
Received: 01 January 1900
|
|
|
|
[1] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[2] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[3] |
ZHANG Xin1,LI Sheng-li1,BIAN Shou-yuan1,YAN Ling2. Basic research on hot compression of EH40 ship plate steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 423-428. |
[4] |
SUN Li-gen, LEI Ming, ZHANG Xin, LIU Yun-song, ZHU Li-guang. In-situ research on microstructure refining effect of Mg treatment for shipbuilding steel at high temperature[J]. Iron and Steel, 2020, 55(5): 94-102. |
[5] |
ZHU Li-guang, ZHENG Shi-wei, ZHANG Qing-jun, CAO Sheng-li. Influence of oxide metallurgy and pulsed magnetic field parameters on steel microstructure[J]. Iron and Steel, 2020, 55(3): 74-79. |
[6] |
LIU Yuan1,WANG Lin-ning2. Microstructure evolution in FGHAZ of P91 ferritic heat resistant steel during creep[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(3): 253-257. |
|
|
|
|