|
|
Influence of Workpiece Width on Hot Strip Mill Stretch |
LI Haijun1,ZHAO Xuliang1,ZHANG Dianhua1,WANG Guodong1,CHEN Feng2 |
1.The State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110004, Liaoning, China; 2. Hot Strip Plant of RockCheck Iron and Steel Company Co., Ltd., Tianjin 200431, China |
|
|
Abstract Mill stretch equation is an indispensable model for AGC system. The mill stretch is changed with strip width during rolling process. The actual mill stretch deviates from that measured with “mill kiss” method, when the strip width deviates from work roll face width. The influence of strip width on mill stretch was analyzed with influence function method, and the results show that mill stretch width compensation increased with strip width decreasing or rolling force increasing. A mill stretch width compensation regression model was developed for online application.
|
Received: 01 January 1900
|
|
|
|
[1] |
WANG Dong-cheng,,WU Yan-lin,LIU Hong-min,. High-efficiency calculation method for roll stack elastic deformation of four-high mill[J]. Iron and Steel, 2015, 50(11): 69-74. |
[2] |
LIANG Xun-guo. Preset Model of Bending Force for Six-High Tandem Cold Rolling Mill[J]. Iron and Steel, 2014, 49(10): 41-43. |
[3] |
. Study on the Deviation Angle of Tension Roll for Hot Strip Down Coilers[J]. Iron and Steel, 2010, 45(12): 41-41. |
[4] |
tong qiang Xianghua LIU. Theory Analysis of Roll Crossing in View of 6H3C Single Cold Rolling Mill[J]. Chinese Journal of Iron and Steel, 2010, 22(04): 20-20. |
[5] |
ZHANG Dianhua;ZHAO Xuliang;XU Jianzhong;CHEN Jilin;LU Zhenghong;AN Wenjun. Roll Contour Optimization Design of 1 250 mm Hot Strip Mill[J]. Chinese Journal of Iron and Steel, 2009, 21(1): 26-0. |
[6] |
CHANG An;DI Hongshuang;BAI Jinlan;TONG Qiang;YANG Daijun. Effect of Rolling Parameters on EdgeDrop in Cold Rolling[J]. Iron and Steel, 2007, 42(10): 0-0. |
|
|
|
|