|
|
Solute Microsegregation Model for Continuous Casting Process of Steel |
Sen LUO |
|
|
|
Abstract A mathematical model of solute microsegregation, which takes both the delta-ferrite/gamma-austenite phase transformation and MnS inclusion precipitation during the continuous casting process of steel into consideration, is developed. The effects of steel composition, MnS inclusion precipitation and cooling rate on high temperature mechanical properties of steel are all analyzed. The model results were extensively compared with experimental data of zero strength temperature (ZST) and zero ductility temperature (ZDT) that reported in the literature. In general, a good agreement between calculated and measured results was verified.
|
Received: 22 June 2009
|
|
|
|
[1] |
JI Xiu-mei1,2,WANG Long1,GAO Ke-wei2,LIU Jie1. Application of ELM to predict plate rolling force[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 393-399. |
[2] |
CAO Yun-fei, YU Wei, LIU Min, JIANG Rui, WANG Chun. Austenite grain growth model of 38MnSiVS bearing microalloyed forging steel[J]. Iron and Steel, 2020, 55(5): 103-108. |
[3] |
chishirong chishirongchishirong. [J]. , 2020, 45(3): 0-0. |
[4] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[5] |
Gan-Shui ZHOU. Diagnosis of instability during trial production of the billet continuous casting in a steel factory in Vietnam[J]. , 2020, 45(2): 0-0. |
[6] |
LAN Peng, TIE Zhan-peng, ZHANG Wei, MIAO Hong-sheng, YAN Qing-zhong, ZHANG Jia-quan. Research progress on spot segregation defects in continuously cast semi-products[J]. Iron and Steel, 2020, 55(2): 11-22. |
|
|
|
|