|
|
Torsional Vibration Analysis of Rougher Main Driving System of Rolling Mills |
ZHOU Jinyu1,CHEN Zhanfu2 |
1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200030, China; 2. Hot Rolling Plant, Baoshan Iron and Steel Co., Ltd., Shanghai 200941, China |
|
|
Abstract The analytic model and dynamic response solution for torsional vibration of main driving system on rougher of rolling mill were studied. The circumferential backlash between the roll and the driving side of the main driving system,which can enlarge the amplitude of the displacement owing to torsional vibration was considered in analysis. According to the rule of backlash opening and closing during biting, a new numeric method based on an advanced 4order RungeKutta algorithm was put forward and used to simulate dynamic response to torsional vibration of the main driving system. The computer simulation of torsional vibration of main driving system of R2 rougher for Baosteel 2050 mm hot rolling mill was carried out. The result of simulation shows that the backlash is open if velocity of the blank exceeds the horizontal component of circular velocity of the roll and torque amplification factors is increased by 4~20 percent. when the backlash is closed.
|
Received: 01 January 1900
|
|
|
|
[1] |
LIU Tao1,2,ZHAO Ming-xing1,2,LI Jian-tong1,2. Dynamic model of rolling mill stiffness based on data in rolling process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 27-32. |
[2] |
ZHANG Yu-tao, YANG Guang-hui, ZHANG Gao-shang, HAN Yue-lin. Metal transverse flow of strips rolled by 2 250 mm CVC 4-high hot rolling mill[J]. Iron and Steel, 2019, 54(3): 56-62. |
[3] |
LING Qihui1,ZHANG Wei1,ZHAO Qiancheng1,. Dynamic parameter identification of rolling mill vertical system[J]. Iron and Steel, 2019, 54(11): 123-129. |
[4] |
JIAO Zhi-jie,HE Chun-yu,DING Jing-guo,WANG Jun,ZHANG Kuo-bin,WANG Li-xia. Industrial popularization and application of plan view pattern control technology for plate mill[J]. Iron and Steel, 2019, 54(1): 49-55. |
[5] |
LI Guang-hui. EVC-Plus technique of transverse thickness deviation control of non-oriented silicon steel during cold rolling[J]. Iron and Steel, 2018, 53(8): 68-72. |
[6] |
BAI Zhen- hua,LI Bo- yang,ZHAO Wei- quan,DU Jiang- cheng,QIAN Cheng,YU Hui- zhong. Setting method of rolling schedule for reversible four- high mill of narrow strip[J]. , 2018, 30(6): 453-460. |
|
|
|
|