|
|
Experimental Research on Vibration and Chatter Mark of CSP Mill |
AN Xiaobin, ZANG Yong,WU Diping,WANG Yongtao |
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract In order to find the regularity and mechanism of vibration of CSP mill during rolling thin container strip, torsional vibration of main drive, vertical vibration of stand and suppression measures of three intermediate stands were tested in spot. Then the relationship between strip(roller) chatter marks and technological parameters, and vibration of rolling mill, and necessary conditions for chatter mark generation were researched. It was found that the frequency of F2 roller chatter mark is 14 Hz, and which is caused by torsinal vibration of main drive system excited by transfer case mesh impact. The frequency of F3 roller chatter mark is 54 Hz, which is caused by horizontal vibration of roller system excited by spindle curved tooth mesh impact. The frequency of F4 roller chatter mark is 78 Hz, which is caused by stand horizontal resonance vibration. For F4, to avoid chatter mark growing, it is necessary to select work roll diameter cautiously at preset rolling speed. The contrast test indicated that the vibration can be eliminated by stopping oil water emulsion supply and adopting highspeed steel work roller.
|
Received: 01 January 1900
|
|
|
|
[1] |
ZHANG Yong-shun, JIANG Wan-lu, LI Zhen-bao, LI Jing-jing. Inducement analysis of nonlinear vibration in rolling mill hydraulic screw down system[J]. Iron and Steel, 2020, 55(4): 106-112. |
[2] |
FANG Yiming,ZHOU Jian,ZHANG Wenjian,. Vibration distributed control system for mold driven by servo motor#br#[J]. Iron and Steel, 2019, 54(8): 137-143. |
[3] |
ZHAO Ruikuan,HAN Yong,ZHANG Chuanxin,ZHU Lin,. Effect of alternating electromagnetic field and magnetic #br#
vibration on corrosion of cast iron[J]. Iron and Steel, 2019, 54(7): 103-113. |
[4] |
. Quantitative Research on Mould Oscillation Deflection Standard of Billet Caster[J]. , 2019, 44(5): 0-0. |
[5] |
LING Qihui1,ZHANG Wei1,ZHAO Qiancheng1,. Dynamic parameter identification of rolling mill vertical system[J]. Iron and Steel, 2019, 54(11): 123-129. |
[6] |
CHEN Xiang. Transformation of nonsinusoidal vibration device for No.2 slab caster in panzhihua iron and steel group Co. Ltd[J]. , 2018, 43(6): 51-54. |
|
|
|
|