|
|
|
| Simulation of Finishing Steel Flats by FEM |
| ZHANG Xian1，ZHONG Jiang1，WANG Yangyu1，HE Yang1，TANG Ming2 |
| 1． The MOE Key Laboratory of Mechanical Manufacture and Automation, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China;2． Office of Chief Engineers, Ningbo Boiler Flat Bar Plant, Ningbo 315040, Zhejiang, China |
|
|
|
|
Abstract In order to study the deformation and rolling force during finishing of steel flats, an analytical model based on elasticplastic finite element method was established to simulate systematically the whole finishing process. The results show that the simulated deformation and rolling force of steel flats during finishing are in good agreement with the actual ones, offering reference data for the calculation of finishing parameters.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
JI Xiu-mei1,2,WANG Long1,GAO Ke-wei2,LIU Jie1. Application of ELM to predict plate rolling force[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 393-399. |
| [2] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Prediction of hot-rolled roll force based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 805-815. |
| [3] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Numerical simulation of gas flow and heat transfer of steel coil in cover of annealing furnace[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 889-896. |
| [4] |
CHEN Xue- hui,YANG Cai- fu,CHAI Feng,ZHANG Qian,LIANG Feng- rui. Tempering process of high strength and high toughness Cr- Mo- V bulb- flat steel[J]. , 2018, 30(6): 482-488. |
| [5] |
LIU XU-hui，，YU Qiang，LIU Zhen-yu. Optimization and application of roll gap lubrication in the semi-endless rolling process of CSP line in lianyuan steel[J]. , 2018, 43(5): 13-18. |
| [6] |
LI Wei-gang，，FENG Ning，WANG Shen-de，YAN Bao-kang. Research and development of deformation desistance model for phase transformation process of hot-rolled strips[J]. Iron and Steel, 2017, 52(6): 61-66. |
|
|
|
|
2006, Vol. 41 
