|
|
Effect of Refining Slag Basicity on Inclusion in 304 Stainless Steel |
Li Shuang-jiang |
|
|
Abstract Combining industrial practice, the effect of refining slag basicity on inclusion in Si-killed 304 austenitic stainless steel during LF refining and continuous casting process was researched with quantitative metallography and SEM+EDS statistical analytical methods. The results show that the spherical CaO-Al2O3-SiO2 compound inclusion is mainly formed in molten steel, and properly higher basicity is beneficial to smaller inclusions formation. With refining slag basicity increasing, the CaO content in compound inclusion increases gradually together with SiO2 content reducing, and the variation of Al2O3 content is slight. In industrial process, the containing Al in FeSi alloy is a mainly factor for Al2O3 inclusion formation. When the refining slag basicity is controlled at 1.0 and 1.5 respectively, the Al2O3 content is about 25% in casting billet, and the deformability of inclusion is feeblish accordingly.
|
Received: 13 January 2010
|
|
|
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[4] |
LI Ji-wu, CAO Qian-qian, YANG Hai-ru. Thinning of 304 stainless steel pipeline under impact fretting wear[J]. Iron and Steel, 2020, 55(6): 118-122. |
[5] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[6] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
|
|
|
|