|
|
Microstructure and Orientation Change During Inverse Transformation of Deformation Induced Ferrite |
WANG Qian1, 2,YANG Zhongmin2,WU Chunjing1 |
1.School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;2.Institute for Structure Materials, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract The inverse transformation of deformation induced ferrite in plain low carbon steel Q235 during temperature holding after deformation was performed Gleeble 1500 in and observed metallographically. The grain orientation was determined by orientation mapping of EBSD technique. The results showed that the deformation induced ferrite inverse transformed to austenite and grains growted within holding time after deformation. Then inversed austenite transformed in martensitic first, and later to ferrite by equilibrium transformation with increasing holding time. The ferrite changed from deformation induced ferrite with a little of metastructure to proeutectoid ferrite with more metastructure.
|
Received: 01 January 1900
|
|
|
|
[1] |
ZHAO Xiao- li,,ZHANG Yong- jian,HUANG Hai- tao,HUI Wei- jun,WANG Cun- yu,DONG Han. Effect of warm- rolling and intercritical annealing on microstructure and mechanical properties of medium- Mn steel[J]. , 2018, 30(8): 642-649. |
[2] |
TIAN Ya- qiang,LI Wang,ZHENG Xiao- ping,SONG Jin- ying,WEI Ying- li,CHEN Lian- sheng. Retained austenite and mechanical properties of 0. 1C- 5Mn steel after intercritical annealing[J]. , 2018, 30(10): 816-821. |
[3] |
WANG Chang,XU Haifeng,HUANG Chongxiang,CAO Wenquan,DONG Han. Evolution of ARTannealed microstructure and partition behavior of manganese in medium manganese steel[J]. Chinese Journal of Iron and Steel, 2016, 28(4): 38-46. |
[4] |
WU Si,,LI Xiu-cheng,ZHANG Juan,SHANG Cheng-jia. Influence of Nb micro-alloying on austenite nucleation and growth in high speed railway wheels steel[J]. Iron and Steel, 2015, 50(7): 100-104. |
[5] |
SONG Li- na,,LAN Peng,,LIU Chun- xiu,,DU Chen- wei,,ZHANG Jia- quan,. Research situation of medium manganese steel for 3rd generation automobile sheet[J]. Chinese Journal of Iron and Steel, 2015, 27(7): 1-8. |
[6] |
ZHAN Wei, ,HU Jun, ,XU Guo-fu,,WANG Cun-yu,CAO Wen-quan,DONG Han. Effect of ART-Annealing on Microstructure and Mechanical Properties of Continuous Casting Billet[J]. Iron and Steel, 2013, 48(3): 66-70. |
|
|
|
|