|
|
Effect of Aluminum on Microstructure and Mechanical properties of 316L Steel |
|
|
|
|
Abstract The 316L steels with 2-10wt.% Aluminum were prepared with WS-4 nonconsumable arc production furnace. The microstructure of the alloys were investigated by metallurgical microscope. The EPMA-1600 electron probe was used to analysize the distribution of the elements and the D8 advance was used to analysize the composition of phase. then the compression property and hardness of the alloy samples were investigated at room. The results showed that the Carbide from continuous strip to material point with the increase of Al content. The aluminum was dissolved into the metal matrix, When the Al content was lesser than 6wt.%, the phase of alloy matrix was γ-phase; when the Al content was more than 6wt.%, then the alloy matrix transfered toα-phase; and the alloy was transformed from plastic materials to brittle materials.
|
Received: 31 July 2009
|
|
|
|
[1] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[2] |
ZHAO Yun-peng, YU Chao, XIAO Hong, WU Zong-he, XU Peng-peng, XIE Hong-biao. Effect of pure iron interlayer on mechanical properties of hot rolled stainless steel clad plate[J]. Iron and Steel, 2020, 55(5): 73-79. |
[3] |
SHAO Cheng-wei, WANG Jun-tao, ZHAO Xiao-li, HUI Wei-jun. Microstructure and mechanical properties of intercritically annealed Al-contain medium Mn steel[J]. Iron and Steel, 2020, 55(5): 87-93. |
[4] |
CAO Jing-hua1,PAN Hong-bo2,3,ZHANG Jing1,ZHANG Teng-fei2,LI Xu-dong2,LIU Wei-ming2,3. Continuous cooling transformation of NbTi microcarbon deep drawing dualphase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 322-328. |
[5] |
XING Xian-qiang, CAO Wen-quan, WANG Cun-yu. Bond structure of 55SiCr steel used for coil springs of automotive suspension system[J]. Iron and Steel, 2020, 55(3): 68-73. |
[6] |
WANG Ji-hong, ZHANG Li-na, CHEN De-li, QI Yue, CAO Li-hong. Discussion about heat treatment process of X20Cr13 blade steel for gas turbine[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 18-. |
|
|
|
|