|
|
Optimization of Controlled Rolling and Cooling Process on Low-alloy High-strength Quenched and Tempered Steel |
CHEN Bing-Zhang |
|
|
|
Abstract Low-alloy high-strength quenched and tempered steel rolling method and the cooling rate after rolling has been studied. The results showed that: test steel using different rolling methods and cooling rate to obtain different initial microstructure and mechanical properties before quenching, but they have the same microstructure and mechanical properties after quenching and tempering. Low-alloy high strength quenched and tempered steel suggested using one-stage rolling method, cooling rate should not be too low. Quenched and tempered steel after the tests have a high uniformity, as compared with the TMCP has superior strength and plasticity and strength and toughness.
|
Received: 22 September 2009
|
|
|
|
[1] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[2] |
HE Ya-yuan,LI Li-wei,YIN Yun-yang,DENG Zhao-jun. Evolution of microstructure and properties of thickness section of wearresistant steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 512-518. |
[3] |
ZHAO Yun-peng, YU Chao, XIAO Hong, WU Zong-he, XU Peng-peng, XIE Hong-biao. Effect of pure iron interlayer on mechanical properties of hot rolled stainless steel clad plate[J]. Iron and Steel, 2020, 55(5): 73-79. |
[4] |
SHAO Cheng-wei, WANG Jun-tao, ZHAO Xiao-li, HUI Wei-jun. Microstructure and mechanical properties of intercritically annealed Al-contain medium Mn steel[J]. Iron and Steel, 2020, 55(5): 87-93. |
[5] |
XING Xian-qiang, CAO Wen-quan, WANG Cun-yu. Bond structure of 55SiCr steel used for coil springs of automotive suspension system[J]. Iron and Steel, 2020, 55(3): 68-73. |
[6] |
WANG Ji-hong, ZHANG Li-na, CHEN De-li, QI Yue, CAO Li-hong. Discussion about heat treatment process of X20Cr13 blade steel for gas turbine[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 18-. |
|
|
|
|