|
|
Finite Element Analysis of Rolling Process With Elastic Roller |
ZHAO Peilin1,ZHU Guoming2,MA Guangting1, TANG Huasheng1,SUN Huizhao1,KANG YongLin2 |
1. Laiwu Steel Group Research and Development Center, Laiwu 271104, Shandong, China; 2. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract To obtain the distribution of stress and deformation for rolls and work piece during rolling process, the FEM software Lsdyna with threedimensional elasticplastic FEM method was adopted in simulating the plate finishing rolling under the assumption that work rolls and backup rolls are elastic. The construction of FEM model, material parameters, boundary conditions and loading definition are introduced in details. The results of simulation show that the contact surface of rolls is under threedirectional compressing stress. The bending curve of the work roll was obtained. The shear stress manifests on the XY plane of backup roll is alternative. The deformation and the spreading curve of the work piece were analysed.
|
Received: 01 January 1900
|
|
|
|
[1] |
JI Xiu-mei1,2,WANG Long1,GAO Ke-wei2,LIU Jie1. Application of ELM to predict plate rolling force[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 393-399. |
[2] |
FENG Lu-lu1,2,HU Feng1,QIAO Wen-wei3,LU Xiu-yu4,ZHANG Guo-hong5. Microstructure and properties of 150mm ultra heavy 07MnCrMoVR hydropower steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 400-405. |
[3] |
CAI Zhen, LIANG Wen, WANG Shui-ze, LIU Yong-qian. Discussion about practice and process of ferrite rolling in Ti-IF steel[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 7-. |
[4] |
Zhan-Guang Han. Study on Surface Temperature Control for Billet Direct-Rolling[J]. , 2020, 45(2): 0-0. |
[5] |
ZHANG De-song, YANG Xiao, CAO Jing-hua, ZHANG Jing,SHEN Xiao-hui, YAN Jun. Plastic instability analysis of square rolled parts in elliptical holes[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 31-. |
[6] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Prediction of hot-rolled roll force based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 805-815. |
|
|
|
|