|
|
Study on Sintering Process Parameters Orthogonal test of Cheng Gang V-Ti Magnitite |
|
|
Abstract Chengde Iron & Steel sintering production was mainly vanadium-titanium magnetite concentrate for the iron materials, But the finished sinter strength is low, RDI serious。To solve this problem, Study the impact of RDI and mechanical strength of sinter based on raw materials R, fuel ratio, MgO content and water by sintering Cup ,Reached conclusion that the best Sintering process parameters under the current conditions of the original fue is that R is 2.6; Fuel ratio is 4.5%; MgO is 4.0%;H2O is 7.5%.which provided theoretical basis to the actual production.
|
Received: 06 November 2009
|
|
|
|
[1] |
CHENG Xiang-kui, ZHAO Ying-tao, ZHAO Xu, WANG Jun, HUANG Xiao-li, PU Chun-lei. Preparation of V-Ti magnetite ore basic pellet containing NaOH[J]. Iron and Steel, 2020, 55(6): 33-37. |
[2] |
DU Liang, HAN Xiu-li, ZHANG Quan-sheng, ZHOU Xiang, YANG Hong-da, WANG Ying. Quantitative relation between mineralogical structure and metallurgical properties of sinter of import iron ore[J]. Iron and Steel, 2020, 55(6): 38-45. |
[3] |
SUN Jun-jie, ZHANG Yong-jie, XU Ji. Segregation of sinter particles in sinter shaft cooler[J]. Iron and Steel, 2020, 55(3): 16-22. |
[4] |
Zhan-Guang Han. Study on Surface Temperature Control for Billet Direct-Rolling[J]. , 2020, 45(2): 0-0. |
[5] |
JIANG Da-jun. Influence of fuel structure on sintering character and comprehensive effect[J]. Iron and Steel, 2020, 55(2): 31-41. |
[6] |
LI Sheng, HE Zhi-jun, LI Yun-fei, QIU Shuang, ZHAN Wen-long, BAI Bing-yang. Metallurgical properties of furnace charge under different conditions of pellet ore and block ore addition[J]. Iron and Steel, 2020, 55(1): 6-11. |
|
|
|
|