|
|
|
| Strengthening Effect of ZrC Particles on Low-carbon Microalloy Steel |
| HUANG Zhong-Dong Wen-li HUANG Qing-kui Cai Niu Jian-ping |
|
|
|
|
Abstract In vacuum conditions, micron-grade ZrC particles were added into a low-carbon microalloy steel as deformation center and recrystallization center of austenite and deformation-induced ferrite during hot-rolling to refine grains. A low-carbon microalloy high strength steel of yield strength 518 MPa was obtained in the laboratory. Composition，quantity and particle size distribution of the precipitated phase in the test steel were studied by chemical phase analysis and small-angle X-ray scattering method; morphology of the second phase particles and microstructure of the steel were also examined by SEM and TEM. It was found that there was less content of MC precipitated phase with size less than 18nm and there was no MC precipitated phase with size less than 10nm. The strengthening effect of the second phase particles including carbide precipitated phase and the added ZrC particles on the steel was discussed. Refinement strengthening is the primary strengthening mode. Dislocation strengthening is the second, precipitation strengthening and solution strengthening are less. The added ZrC particles play an important role in the course of refinement strengthening and dislocation strengthening.
|
|
Received: 13 January 2010
|
|
|
|
| [1] |
YE Ya-ping1,YIN Shu-biao1,4,GAO Peng1,ZHANG Yong-qing2,CHEN Wei3，CAO Jian-chun1. Effect of soaking temperature on austenitization and solid solution of niobium in antiseismic rebar[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 830-836. |
| [2] |
DOU Wei-xue,WANG He-song,KANG Jian,LI Zhen-lei,YUAN Guo. Effect of cooling rate on microstructure of low-carbon steel produced by strip casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(8): 748-753. |
| [3] |
YE Ya-ping1,YIN Shu-biao1,4,GAO Peng1,ZHANG Yong-qing2,CHEN Wei3，CAO Jian-chun1. An investigation on annealing process and strengthening and toughening mechanism of 1000MPa grade microalloyed coldrolled dualphase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 912-919. |
| [4] |
HUI Ya- jun,,CHEN Bin,,CUI Yang,,XIAO Bao- liang,,ZHANG Da- wei,,LI Xiao- lin,. Development of 600MPa grade Nb- Ti microalloyed high formability crossbeam steel[J]. , 2018, 30(5): 399-404. |
| [5] |
ZHANG Yu,,ZHAO Ji- qing,LI Li,YANG Gang. Effect of solid solution treatment on grain growth behavior of FB2 rotor steel[J]. , 2018, 30(11): 916-921. |
| [6] |
YU Xiao-chun，WANG Hong-feng. Analysis of the second phase particles and slab surface crack in steel[J]. Chinese Journal of Iron and Steel, 2017, 42(2): 54-57. |
|
|
|
|
2010, Vol. 45 
