|
|
Effect of Continous Annealing on Bake Hardening Property of Ultra-low Carbon Steel |
CUI Yan Wang Rui-zhen Wang |
|
|
|
Abstract This article study effect of continous annealing on bake hardening property of the ultra low carbon steel through experiments. The result of study shows that: with the increase of annealing temperature, the bake hardening property of steel improved, because increasing the annealing temperature can not only improve the dissolution of NbC, but also appropriately increase the grain size which make the grain boundary segregation of carbon atoms decreased. Improving the cooling velocity of slow cooling section can also improve the bake hardening property because the precipitation of NbC decreased. The cooling velocity of fast cooling section and over aging temperature have no significant effect on bake hardening property. Improving the cooling velocity after over aging can obstruct the grain boundary segregation of carbon atoms, so it’s beneficial to improving the bake hardening property.
|
Received: 01 December 2009
|
|
|
|
[1] |
YAN Xue-qiang1,2,ZHENG Wan1,2,WANG Guo-wei1,2,YAN Wen1,LI Guang-qiang1,2. Effect of microporous MgO refractories on steel cleanliness[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 483-490. |
[2] |
ZHENG Xiaofei, KANG Yonglin, WU Xuesong. Correlation between bake hardening values and annealing temperature of DP980+Z[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(5): 485-490. |
[3] |
WANG Wei-wei,LIU Liu,LI Guang-ying. Microstructure and properties of high elongation DP980 cold rolled dual phase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(12): 1053-1057. |
[4] |
REN Wei- chao,LI Yang- long,YANG Zhen,LI Guan- xiong,SUN Jian- xin,ZHENG Xiao- fei. Study on strip running deviation at exit of heat section in continuous annealing furnace for cold rolling[J]. , 2018, 30(9): 723-728. |
[5] |
YUAN Peng,,ZHANG Jun,LIU Dao-zheng,LI Hai-bo,,ZHU Ke-ran,CHEN Bin,. Formation mechanism and control technology of Al-Ti inclusions in ultra low carbon steel[J]. Iron and Steel, 2018, 53(7): 24-30. |
[6] |
LIU Hua-sai,,WU Nai,LI Zhen,HAN Yun,. Flattening cracking cause and its mechanism analysis of the continuous annealed DP1000 steel[J]. , 2018, 36(6): 35-40. |
|
|
|
|