|
|
Production of Tire Cord Steel Wire at Angang |
LI Wanxiang1,WANG Rengui2,GUAN Yong3 |
1. Technical Center, Angang New Steel Co., Ltd., Anshan 114001, Liaoning, China; 2. No.1 Steelmaking Plant, Angang New Steel Co., Ltd., Anshan 114028, Liaoning, China;3. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Angang New Steel Co., Ltd. produces tire cord steel wire with hot metal desulphurization, converter steelmaking, LF and VD treatments, bloom casting and hot charge rolling. The size of brittle inclusions in the wire such as Al2O3 and Ti(C,N) and so on is less than 5 μm. The width of plastic inclusions is less than 15 μm. The composition of liquid steel is controlled in a narrow range. Sampling inspection proves segregation in bloom is slight. Wires from different heats have uniform properties. The indexes of decarburization depth, distribution of cementite along grain boundaries and scaling are in accordance with specification. Customer tryout proves tire cord steel wire meets their requirements, and the tire cord steel wire has been put into mass production.
|
Received: 01 January 1900
|
|
|
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[4] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[5] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
[6] |
WANG Yi, ZHANG Li-feng, REN Ying, REN Qiang. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020, 55(5): 39-44. |
|
|
|
|