|
|
Analysis of CO2 Emission Reduction in Top Gas Recycling-Oxygen Blast Furnace Combine With CCS |
XUE Qing-guo,HAN Yi-hua,WANG Jing-song,KONG Ling-tan |
State Key Laboratory of Aduanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Research and development progress of top gas recycling and oxygen blast furnace was introduced. The characteristic and technology maturity of CCS (carbon capture and storage) were discussed. Especially, the principle and applicable condition of several methods of the carbon dioxide separation were analyzed. Finally, the effect of CO2 emission reduction in top gas recycling – oxygen blast furnace with CCS was calculated and analyzed with IPCC2006. The results show that CO2 emission of the new process is 582.40kg/t (hot metal), CO2 emission can be reduced by 55%, compared with traditional blast furnace. The development of this technology could contribute to CO2 emission reduction of iron and steel industry in China. It had important practical significance and the profound influence to the sustainable development of iron and steel industry.
|
Received: 15 March 2011
Published: 28 September 2011
|
|
|
|
[1] |
ZHANG Heng,ZHANG Jian-liang,JIAO Ke-xin,MO Chao-xing,CHEN Ru-gang . Analysis on damage cause to stave-plate compound cooling system of a commercial blast furnace[J]. Iron and Steel, 2018, 53(8): 28-37. |
[2] |
LIU Song,Lü Qing,ZHANG Xu-sheng,LIU Xiao-jie,WANG Shu-huan,LI Fu-min. Change rule of top gas circulation in blast furnace gas injection process[J]. Iron and Steel, 2018, 53(2): 78-82. |
[3] |
XIE Hong-biao,WANG De-wei,YU Chao,QI Zi-chen,XIAO Hong. Stainless steel/carbon steel composite plate prepared by hot-roll bonding with pure iron as intermediate material[J]. Iron and Steel, 2017, 52(12): 48-53. |
[4] |
WANG Ying- yu,PAN Jian,ZHU De- qing,WANG Lin. Performance characterization of straw charcoal used for blast furnace injection[J]. , 2017, 29(11): 892-899. |
[5] |
CHU Man-sheng, ZHAO Wei, LIU Zheng-gen, WANG Hong-tao, TANG Jue. Principle on using carbon iron composite as blast furnace burden[J]. Iron and Steel, 2015, 50(3): 9-18. |
[6] |
LI Wen-bin,YUAN Si-yu,LI Guang-long,FEI Jing. Research on the bonding properties of Q345B cladding heavy steel plate[J]. Iron and Steel, 2015, 50(11): 88-92. |
|
|
|
|