|
|
Simulation of Central Defects Closing During 400mm Thickness Continuous Casting Slab Rolling |
ZHANG Lin1,ZHAO De-wen1,DENG Wei1,WANG Gen-ji1,2,BAI Xue-jun2 |
1. State Key Lab of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China 2. Qinhuangdao Shouqin Metal Materials Co., Qinhuangdao 066326, Hebei, China |
|
|
Abstract The behavior and critical condition of defects closing during Q345 ultra-heavy plate rolling with 400mm thickness continuous casting slab were investigated with FEM, ANSYS/LS-DYNA. The results show that the central rectangle defects in ultra-heavy plate will be closed by enough pass reduction ratio. The defects size, roll radius and slab thickness have obvious influence on critical reduction ratio. The critical reduction ratio is inversely proportional to defect size and roll radius but is proportional to slab thickness. In the hot roll mill of 1120mm×4300mm, the critical closing reduction ratio for the central rectangle defects to be closed in the first pass is 15.8%, changing into geometric parameter 0.511; meanwhile, closing central defects with critical reduction ratio has better effect. At last, the defects closing test verifies the results of simulation.
|
Received: 08 December 2010
Published: 17 November 2011
|
|
|
|
[1] |
SUN Deng-yue, HOU Hai-tao, RU Wen-di, XU Shi-min. Design of multi-point flexible pressure straightening device for wide and heavy plates and calculation of reverse bending amount[J]. Iron and Steel, 2020, 55(6): 113-117. |
[2] |
MAO Jinghua,SHUAI Yong,XIE Guiqiang,WANG Yatao. Key technology of internal quality control for#br# continuous casting extrathick slab[J]. Iron and Steel, 2019, 54(8): 64-69. |
[3] |
GAO Cairu,PAN Huan,QIU Chunlin,LI Changsheng,LIN Fengkun. FEM simulation of inner void defects in plastic die steel during upsetting process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(6): 547-552. |
[4] |
. Research on Central segregation control of 400mm ultra-thick slab[J]. , 2019, 44(6): 0-0. |
[5] |
GAO Zhi-yu1, FAN Xian-jin1, DOU Chun-yue1, ZHANG Xu1, PAN Tao2. Simulation analysis on transfer law of deformation in thickness direction of ultra-heavy plate[J]. Iron and Steel, 2019, 54(4): 49-54,62. |
[6] |
YU Wei, ZHANG Ze-yu, WU Wei, LEI Li-qi, CAI Qing-wu. Rolling bonding process of stainless steel/carbon steel rebar with seawater corrosion resistance[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(4): 380-386. |
|
|
|
|