|
|
Development and Commercial Run of Hot-Rolled Fine-Grained Strip Steels in Shasteel |
LIU Dong-sheng1,LI Ran2,CHEN Shao-hui2 |
1. Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu, China 2. Jiangsu Shagang Group, Zhangjiagang 215625, Jiangsu, China |
|
|
Abstract Industrial mass production was conducted for hot-rolled plain carbon-manganese strip steels with fine-grained microstructure based on systematic studies in laboratory, test-plant rolling trials and a series of industrial rolling trials. The mechanism of deformation-induced-ferrite-transformation (DIFT) is utilized during finish rolling and lamellar water flow cooling employed on run-out table to form fine-grained ferrite microstructure consisting of PF+P+B in manganese containing (w([C]) is 0.13%-0.17%,w([Mn]) is 0.2%-0.7%) low carbon steels. The technical approach to produce fine-grained microstructure consisting of PF+B in low carbon high manganese (w([C]) is 0.13%-0.17%, w([Mn]) is 1.5%) containing steels is featured by conventional finish controlled-rolling in non-recrystallized austenite region followed by the same accelerated cooling as the case for low manganese containing steels. Fine-grained hot rolled strip steels with thickness at 4.0-5.5mm have been produced with a 1450mm hot strip mill.
|
Received: 30 August 2010
Published: 17 November 2011
|
|
|
|
[1] |
SUN Ming-han, ZHENG Yi, QU Chun-tao, JIN Shi-zhe, XU Zhi-qiang, DU Feng-shan. Numerical simulation of temperature field in ultra-fast cooling process of hot rolled plate[J]. Iron and Steel, 2020, 55(3): 50-57. |
[2] |
YUAN Guo,CHEN Dong,KANG Jian,LI Zhen- lei,WANG Guo- dong. Development and application of NG- TMCP technology based on ultra- fast cooling for large scale hot rolled strip lines[J]. , 2019, 31(2): 150-158. |
[3] |
SUN Yankun,ZHANG Wei,,WU Di. Industrial experiment of ultrafast cooling for largesection bearing steel bar[J]. Chinese Journal of Iron and Steel, 2017, 29(3): 180-184. |
[4] |
LIU Yuan,XU Lei-lei,ZHAO Qing-quan,HE Biao,CAO Jin-rong,XIAO Gong-ye. Effect of Cooling Rate and Cooling Temperature on the Formation of Banded Structure in SA-210Gr. C Steel[J]. Chinese Journal of Iron and Steel, 2014, 26(6): 57-60. |
[5] |
YUAN Da, WANG Bing-xing, WANG Zhao-dong, WU Di. Technology of Material Tracking for Ultra-Fast Cooling System[J]. Chinese Journal of Iron and Steel, 2014, 32(4): 6-8. |
[6] |
HUANG Jun,,WU Wen-fei,LIU Hua-fei,ZHANG Yong-jie,. Numerical Simulation of Strip Continuous Annealing Line Cooled With Duct Cooling Process[J]. Iron and Steel, 2014, 49(2): 50-54. |
|
|
|
|