|
|
A New Model of Selective Oxidation During Blowing Low-Silicon Hot Metal |
XIANG Chang-xiang,WANG Li-jun |
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract In order to understand the essence of problems occurred in blowing low-silicon hot metal, the Gibbs energies of oxidation of [C] and [Si] were calculated at different [Si] concentration. A new concept of “oxidation transfer concentration” was proposed, which can indicate the critical point of selective oxidation of [Si] or [C] in hot metal. On the basis of this new concept, the influence of low silicon hot metal on steelmaking process was discussed, and the optimal [Si] concentration in low silicon hot metal was given. Furthermore, effect of [C] concentration on this “oxidation transfer concentration” of [Si] was also analyzed and formulated, which can be used to evaluate the oxidation transfer concentration in various conditions. Thus, it will be flexible to perform operation accordingly in practice.
|
Received: 17 May 2011
Published: 20 February 2012
|
|
|
|
|
[ 1 ] |
魏寿昆. 冶金过程热力学[M]. 上海: 上海科学技术出版社, 1980.
|
[ 1 ] |
魏寿昆. 冶金过程热力学[M]. 上海: 上海科学技术出版社, 1980.
|
[ 2 ] |
张家芸. 冶金物理化学[M]. 北京: 冶金工业出版社, 2004.
|
[ 2 ] |
张家芸. 冶金物理化学[M]. 北京: 冶金工业出版社, 2004.
|
[ 3 ] |
成兰伯. 高炉炼铁工艺及计算[C]. 2000年亚洲钢铁会议论文集. 北京, 2000: 334.
|
[ 3 ] |
成兰伯. 高炉炼铁工艺及计算[C]. 2000年亚洲钢铁会议论文集. 北京, 2000: 334.
|
[ 4 ] |
王博利, 郝强, 唐志军. 邯钢三炼钢低硅铁水冶炼探讨与实践[C]. 河北省2010年炼钢-连铸-轧钢生产技术与学术交流会论文集. 邯郸, 2010: 241.
|
[ 4 ] |
王博利, 郝强, 唐志军. 邯钢三炼钢低硅铁水冶炼探讨与实践[C]. 河北省2010年炼钢-连铸-轧钢生产技术与学术交流会论文集. 邯郸, 2010: 241.
|
[ 5 ] |
安君辉, 王玉生, 白鹭. 低硅铁水冶炼工艺探讨[C]. 河北省冶金学会2009年炼钢-连铸技术与学术年会论文集. 唐山, 2009: 86.
|
[ 5 ] |
安君辉, 王玉生, 白鹭. 低硅铁水冶炼工艺探讨[C]. 河北省冶金学会2009年炼钢-连铸技术与学术年会论文集. 唐山, 2009: 86.
|
[ 6 ] |
杨文远, 吴文东, 王明林, 等. 大型转炉低硅铁水高效吹炼的研究[J]. 钢铁研究学报, 2006, 18(12):10.
|
[ 6 ] |
杨文远, 吴文东, 王明林, 等. 大型转炉低硅铁水高效吹炼的研究[J]. 钢铁研究学报, 2006, 18(12):10.
|
[ 7 ] |
杨文远, 吴文东, 王明林, 等. 大型转炉低硅铁水炼钢研究[J]. 钢铁, 2005, 40 (8): 22.
|
[ 7 ] |
杨文远, 吴文东, 王明林, 等. 大型转炉低硅铁水炼钢研究[J]. 钢铁, 2005, 40 (8): 22.
|
[1] |
WANG Feng1,XIANG Jia-fa2,GUO Yu-feng1,ZHENG Fu-qiang1. Research progress of sintering optimization ore blending method based on basic process performance of iron ore[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 89-95. |
[2] |
JI Sha,LUO Yan,ZHANG Guofeng,JIA Wenjun,REN Ying,ZHANG Lifeng. Formation mechanism of submerged entry nozzle #br# clogging layer structure of 40Cr steel[J]. Iron and Steel, 2019, 54(8): 124-131. |
[3] |
HUANG Bing,ZHU Ming-mei,ZHONG Yong,ZHANG Ai-ping,WANG Yu. Thermodynamic calculation of phase composition of CaOSiO2FeOCr2O3MgOMnO slag system[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(8): 718-725. |
[4] |
ZHANG Xue-wei, YANG Cai-fu, CHAI Feng, LUO Xiao-bing, ZHANG Li-feng, DONG Yuan-chi. Precipitation and control of MnS inclusions by thermodynamic analysis[J]. Iron and Steel, 2019, 54(12): 27-34. |
[5] |
JIANG Guang-rui,,WANG Hai-quan,,LIU Li-bin,. Effects of over-aging process on selective oxidation behavior of a C-Mn-Si high strength steel[J]. Iron and Steel, 2019, 54(1): 71-78. |
[6] |
ZENG Zhi-qi,,YANG Qian-kun,,AI Ke-nan,,XIE Jian-bo,,LI Jian,,FU Jian-xun,. Analysis on nozzle clogging of 49MnVS steel during production[J]. Iron and Steel, 2019, 54(1): 43-48. |
|
|
|
|