|
|
Schedule Free Rolling Technology of Ansteel 2150 ASP |
XU Shi-shuai1,SHI Nai-an1,YAN Dong-yu1,HE An-rui2,ZHANG Hua1 |
1. Hot Strip Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China 2. National Engineering Research Center for Advanced Rolling, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract In order to solve the problem of mutual influence and mutual restriction between steel-making, casting, and rolling, focusing on strip shape control, several techniques were presented, including developing LVC work roll and ASPB back-up roll and applying high-speed-steel work rolls and roll gap lubrication on the finishing mill, as well as rolling schedule dynamic planning. The result shows that the length of rolling with equal width can be up to 100km, and the bounce of width can be up to 300mm on the basis of high accuracy of crown and flatness control. It’s available to realize mixed rolling with different steel grade, different thickness and different width. The rate of direct charging can be more than 60% with total hot charging exceeding 85%.
|
Received: 21 April 2011
Published: 20 March 2012
|
|
|
|
[1] |
陈先霖,张杰,张清东等,宽带钢热连轧机板形控制系统的开发,钢铁,2000,7(35):28-33
|
[1] |
陈先霖,张杰,张清东等,宽带钢热连轧机板形控制系统的开发,钢铁,2000,7(35):28-33
|
[2] |
何安瑞,杨荃,陈先霖,等.LVC工作辊地超宽带钢热轧机的应用[J].中国工程机械,2008,7:864-868.
|
[2] |
何安瑞,杨荃,陈先霖,等.LVC工作辊地超宽带钢热轧机的应用[J].中国工程机械,2008,7:864-868.
|
[3] |
邵健,何安瑞,杨荃,等.热轧宽带钢自由规程轧制中机型的配置[J].中国工程机械,2008,22:2673-2676
|
[3] |
邵健,何安瑞,杨荃,等.热轧宽带钢自由规程轧制中机型的配置[J].中国工程机械,2008,22:2673-2676
|
[4] |
何安瑞,等. 热带钢轧机变接触轧制技术应用,钢铁, 2007, 2(42): 31-34
|
[4] |
何安瑞,等. 热带钢轧机变接触轧制技术应用,钢铁, 2007, 2(42): 31-34
|
[1] |
ZHOU Cong-rui, CHEN Xiao-long, ZHOU Ming-ke,FAN Lei, MEI Peng, BAO Si-qian. Cause analysis of surface blackening of SPHC hot rolled strip after pickling[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 41-. |
[2] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Prediction of hot-rolled roll force based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 805-815. |
[3] |
YANG Geng-wei,LU Jia-wei,SUN Hui,FANG Zi-wei,ZHOU Yi-liao,YAO Nan. Microstructure, mechanical properties and phase transformation behavior of TiV microalloyed highstrength hotstrip steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(8): 726-732. |
[4] |
MA Wei1,LI Wei-gang1,2,ZHAO Yun-tao1,YAN Bao-kang1. Numerical simulation of gas flow and heat transfer of steel coil in cover of annealing furnace[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 889-896. |
[5] |
LI Wei- gang,,FENG Ning,ZHAO Yun- tao,YAN Bao- kang. Prediction of deformation resistance during hot rolling process based on generalized additive model[J]. , 2018, 30(6): 447-452. |
[6] |
LI Wei- gang,,YANG Wei,ZHAO Yun- tao,HU Heng- fa. Mechanical property prediction model of hot- rolled strip via big data and metallurgical mechanism analysis[J]. , 2018, 30(4): 302-308. |
|
|
|
|