|
|
Discrete Element Model for Charging Process of COREX 3000 Shaft |
LI Qiang1,FENG Ming-xia2,ZOU Zong-shu1 |
1. School of Material and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China 2. Metallurgy Engineering College, Liaoning Institute of Science and Technology, Benxi 117004, Liaoning, China |
|
|
Abstract The gas distribution in a shaft furnace dominates the temperature profile, gas utilization ratio, metallization degree and is the only means for regulating the gas flow distribution. Through introducing kinematic theory of granular, a numerical simulation model of burden distribution in the shaft furnace of COREX 3000 was developed by means of discrete element method (DEM) based on the Newton second law and soft-sphere contact model. The model can intuitively and visually reproduce the charging process, and quantitatively access the material flow trajectories, landing and forming process of the burden surface shape. Applying the model to further analyze the mixing charging process of two different diameter particle, obtained the charge movement process and the formation of the stockpile and found that size segregation is serious. Therefore, the model provides an important research base established model to find and optimize the charge patterns.
|
Received: 22 March 2012
Published: 30 October 2012
|
|
|
|
|
[1] |
钱良丰, 王成玉. 优化COREX-3000竖炉布料的实践[J]. 宝钢技术, 2011, (6):18-23.
|
[1] |
钱良丰, 王成玉. 优化COREX-3000竖炉布料的实践[J]. 宝钢技术, 2011, (6):18-23.
|
[2] |
李强, 张玉栋, 张丽娟,等. COREX竖炉布料规律的数学模型研究[J]. 东北大学学报:自然科学版, 2011, 32(11):1591-1594.
|
[2] |
李强, 张玉栋, 张丽娟,等. COREX竖炉布料规律的数学模型研究[J]. 东北大学学报:自然科学版, 2011, 32(11):1591-1594.
|
[3] |
李强, 刘栋梁, 张丽娟,等. COREX 3000竖炉炉顶布料过程的实验研究[J]. 东北大学学报:自然科学版, 2012, 33(4):1591-1594.
|
[3] |
李强, 刘栋梁, 张丽娟,等. COREX 3000竖炉炉顶布料过程的实验研究[J]. 东北大学学报:自然科学版, 2012, 33(4):1591-1594.
|
[4] |
杜鹤桂, 杜钢. 高炉无钟炉顶布料料面形状的模拟研究 [J]. 钢铁, 1989, 5(24): 16-20.
|
[4] |
杜鹤桂, 杜钢. 高炉无钟炉顶布料料面形状的模拟研究 [J]. 钢铁, 1989, 5(24): 16-20.
|
[5] |
Kajiwara Yoshimasa, Jimbo Takao, Sakai Toshihiko. Investigations of bell-less charging based on full scale model experiments [J]. Trans ISIJ, 1984, 24: 799-807.
|
[5] |
Kajiwara Yoshimasa, Jimbo Takao, Sakai Toshihiko. Investigations of bell-less charging based on full scale model experiments [J]. Trans ISIJ, 1984, 24: 799-807.
|
[6] |
Kajiwara Yashimasa, Jimbo Takao, Sakai Toshihiko. Development of a simulation model for burden distribution at blast furnace top [J]. ISIJ International, 1983, (12): 1045-1052.
|
[7] |
杨天钧, 段国绵, 周渝生, 等. 高炉无料钟布料炉料分布预测模型的开发研究 [J]. 钢铁, 1991, 26(11): 10-14.
|
[6] |
Kajiwara Yashimasa, Jimbo Takao, Sakai Toshihiko. Development of a simulation model for burden distribution at blast furnace top [J]. ISIJ International, 1983, (12): 1045-1052.
|
[7] |
杨天钧, 段国绵, 周渝生, 等. 高炉无料钟布料炉料分布预测模型的开发研究 [J]. 钢铁, 1991, 26(11): 10-14.
|
[8] |
张建良, 张雪松, 国宏伟, 等. 无钟炉顶多环布料数学模型的开发 [J]. 钢铁, 2008, 43(12): 19-23.
|
[8] |
张建良, 张雪松, 国宏伟, 等. 无钟炉顶多环布料数学模型的开发 [J]. 钢铁, 2008, 43(12): 19-23.
|
[9] |
于要伟, 白晨光, 梁栋, 等. 无钟高炉布料数学模型的研究 [J]. 钢铁, 2008, 43(11): 26-30.
|
[9] |
于要伟, 白晨光, 梁栋, 等. 无钟高炉布料数学模型的研究 [J]. 钢铁, 2008, 43(11): 26-30.
|
[10] |
杜鹏宇, 程树森, 胡祖瑞, 等. 高炉无钟炉顶布料料流宽度数学模型及试验研究 [J]. 钢铁, 2010,(01), 14-18.
|
[10] |
杜鹏宇, 程树森, 胡祖瑞, 等. 高炉无钟炉顶布料料流宽度数学模型及试验研究 [J]. 钢铁, 2010,(01), 14-18.
|
[11] |
滕召杰, 程树森, 杜鹏宇. 无钟炉顶溜槽内颗粒的三维运动 [J]. 钢铁, 2011,(12), 15-19.
|
[11] |
滕召杰, 程树森, 杜鹏宇. 无钟炉顶溜槽内颗粒的三维运动 [J]. 钢铁, 2011,(12), 15-19.
|
[12] |
刘云彩. 高炉布料规律 [M]. 第3版. 北京: 冶金工业出版社, 2005: 1.
|
[12] |
刘云彩. 高炉布料规律 [M]. 第3版. 北京: 冶金工业出版社, 2005: 1.
|
[13] |
Hiroshi MIO, Satoshi KOMATSUKI, et al. Effect of Chute Angle on Charging Behavior of Sintered Ore Particles at Bell-less Type Charging System of Blast Furnace by Discrete Element Method[ J]. ISIJ International, 2009, 49 (4): 479-486.
|
[13] |
Hiroshi MIO, Satoshi KOMATSUKI, et al. Effect of Chute Angle on Charging Behavior of Sintered Ore Particles at Bell-less Type Charging System of Blast Furnace by Discrete Element Method[ J]. ISIJ International, 2009, 49 (4): 479-486.
|
[14] |
Yu Y W, Henrik S. Experimental and dem study of segregation of ternary size particles in a blast furnace top bunker model [J]. Chemical Engineering Science, 2010, 65(18): 5237-5250.
|
[14] |
Yu Y W, Henrik S. Experimental and dem study of segregation of ternary size particles in a blast furnace top bunker model [J]. Chemical Engineering Science, 2010, 65(18): 5237-5250.
|
[15] |
杜鹏宇, 程树森, 滕召杰. 高炉无料钟炉顶布料料流轨迹检测与三维图像重建 [J]. 冶金自动化, 2009, 33(6): 1-6.
|
[15] |
杜鹏宇, 程树森, 滕召杰. 高炉无料钟炉顶布料料流轨迹检测与三维图像重建 [J]. 冶金自动化, 2009, 33(6): 1-6.
|
[16] |
Cundall P A. A computer model for simulating progress large scale movement in block rock system [C]. //Proceedings of Symposium of the International Society of Rock Mechanics, 1971, Proc 2: 8.
|
[16] |
Cundall P A. A computer model for simulating progress large scale movement in block rock system [C]. //Proceedings of Symposium of the International Society of Rock Mechanics, 1971, Proc 2: 8.
|
[1] |
ZHAO Shi-qi1,2,WANG Chun-lai3,FAN Zheng-yun1,2,ZHOU Ji-liang1,2,YIN You-hao1,2,QIU Suo-chao4. Simulation of sintering shuttle distribution based on discrete element method[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 470-475. |
[2] |
MA Hong-you,ZHANG Jian-liang,WANG Zhen-yang,ZHANG Lei. Segregation of burden distribution phenomenon in bell less furnace top equipment[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(3): 220-226. |
[3] |
DU Bin-bin, WU Sheng-li, ZHOU Heng, KOU Ming-yin. Effect of scaffolding on solid flow in COREX shaft furnace by discrete element simulation method[J]. Iron and Steel, 2020, 55(1): 12-19. |
[4] |
ZHANG Yong,ZHANG Bin,CHEN Rui-yang. Optimal calculation of blast furnace burden distribution matrix based on genetic algorithm[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 795-804. |
[5] |
SUN Jun-jie, DI Zhan-xia, LI Jia-xin, LU Kai-cheng. Influence of inclination and shape of chute on movement of burden flow[J]. Iron and Steel, 2019, 54(4): 19-23. |
[6] |
ZHANG Yong,ZHANG Bin,CHEN Rui-yang. Research on metallurgical properties of Mongolian lump ore[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 882-888. |
|
|
|
|