|
|
Discussion on Construction of Model and System on Energy Flow in the Steel Plant |
DING Yi1,CHEN Guang2,LI Li3,SHI De-ming1,CHEN De-min2,LIU Xian-hui 3 |
1. Energy Department of Maanshan Iron and Steel Co., Ltd., Ma’anshan 234002, Anhui, China 2. Eenergy and Environment Institute of Anhui University of Technology, Ma’anshan 234002, Anhui, China 3. Electronic and Information School of Tongji University, Shanghai 201804, China |
|
|
Abstract Through the analysis of the mass flow and energy flow, the energy flow and mass flow information system was constructed with the information and control technology; and the multi-class, multi-level, multi-view model system was set up for realizing the coupling of energy flow and mass flow, adjusting on line and the orderly optimization of processes. It mainly includes the building of hardware platform for the energy center, the development of energy management software, the construction of kinds of models, including the coupling sub-models of energy flow and mass flow in each individual process, the relationship models between individual processes or different systems, and the mathematical model for the energy consumption optimization. However, with the optimization regrouping and collaborative integration by the ‘energy flow network’ and ‘mass flow network’, the energy lean management and controlling system and decision-making support system were constructed. It can improve the energy efficiency and resource utilization.
|
Received: 22 September 2011
Published: 30 October 2012
|
|
|
|
[4] |
王建军,蔡九菊,张琦等, 钢铁企业能量流模型化研究[J]. 中国冶金, 2006. 16(5): 48~52.
|
[1] |
陈光,陆钟武,蔡九菊. 钢铁企业氧气系统动态仿真[J]. 东北大学学报( 自然科学版) ,2008,29 ( 6) : 867 - 870.[2]张琦,蔡九菊等. 钢铁企业燃气互换性研究[J].东北大学学报( 自然科学版) ,2008,29( 6) : 867 - 870.[3]殷瑞钰,. 从开放系统、耗散结构到钢厂的能量流网络化集成[J]. 中国冶金,2010,(8).1-14
|
[5] |
王维兴, 钢铁工业的节能潜力分析[J]. 冶金能源, 2002. 21(3): 5~6.
|
[4] |
王建军,蔡九菊,张琦等, 钢铁企业能量流模型化研究[J]. 中国冶金, 2006. 16(5): 48~52.
|
[6] |
胡长庆, 物质流、能量流分析与新一代钢铁制造流程[D], 钢铁研究总院博士论文. 2006: 北京.[7]J. H. kim,H. - S. Yi,C. Han. A novel MILP-model for plant wide multi-period optimization of byproduct gas supply system in the iron and steel makingprocess [J]. Trans IChemE,2003,81: 1015 -1025.[8]Kim J H,Yi H S,Han C. Plant wide optimal byproduct gas distribution and holder level control in the iron and steel making process [J]. Korean Journal of Chemical Engineering,2003,20 ( 3) : 429 - 435.[9]Akimoto,K. , Sannomiya,N. ,Nishikawa, et al.An optimal gas supply for a power plant using a mixed programming mode[J].Automatica,1991,27 ( 3) : 513 - 518.
|
[5] |
王维兴, 钢铁工业的节能潜力分析[J]. 冶金能源, 2002. 21(3): 5~6.
|
[6] |
胡长庆, 物质流、能量流分析与新一代钢铁制造流程[D], 钢铁研究总院博士论文. 2006: 北京.[7]J. H. kim,H. - S. Yi,C. Han. A novel MILP-model for plant wide multi-period optimization of byproduct gas supply system in the iron and steel makingprocess [J]. Trans IChemE,2003,81: 1015 -1025.[8]Kim J H,Yi H S,Han C. Plant wide optimal byproduct gas distribution and holder level control in the iron and steel making process [J]. Korean Journal of Chemical Engineering,2003,20 ( 3) : 429 - 435.[9]Akimoto,K. , Sannomiya,N. ,Nishikawa, et al.An optimal gas supply for a power plant using a mixed programming mode[J].Automatica,1991,27 ( 3) : 513 - 518.
|
[1] |
ZHANG Zhi-wei. Establishment Ideas of Automatic Mechanical Laboratory[J]. Chinese Journal of Iron and Steel, 2014, 32(3): 59-61. |
[2] |
ZHAO Kuang-yi,,HAO Xiao-dong,ZHOU Shi-guang. Information System of Materials Thermodynamics Based on J2EE[J]. Chinese Journal of Iron and Steel, 2013, 25(9): 6-10. |
[3] |
ZHANG Chun-xia,SHANGGUAN Fang-qin,LI Xiu-ping,Lynn Price,Nathaniel Aden,Ali Hasanbeigi. Study on Energy Efficiency Benchmarking of the Steel Industry Between China and the U.S.[J]. Iron and Steel, 2013, 48(1): 87-94. |
[4] |
ZHAO Kuang-yi,HAO Xiao-dong,ZHOU Shi-guang. Supporting Technology on Data Information System of Materials[J]. Chinese Journal of Iron and Steel, 2012, 24(11): 1-5. |
|
|
|
|