|
|
|
| Water Simulation on Vanadium Extraction by Powder Injection in 150 t Converter |
| BAI Rui-guo1,2,L Ming1,ZHU Rong1,BAO Xiang1,ZHANG Xing-li1,2,GAO Hai1,2 |
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
2. Chengde Iron and Steel Company, Chengde 067002, Hebei, China |
|
|
|
|
Abstract Through water simulation experiment, gas and powder mixture were thought as a larger density of gas phase flow in powder injection vanadium extraction process. The electrical conductivity were measured to compare mixing time of different powder injection flow and position experiments for studying stirring effect and impacting characteristics of injecting powder in the 150t vanadium extraction converter. It is found that it is easy to block the injection nozzle by bottom injecting powder. When the nozzle is in the side part of 30 degrees and 300mm lower than pool surface, the mixing time is only 54.5 seconds. So the position which is symmetric with side blowing place in 30 degrees about axis A should be the best powder injection position. It is beneficial to strengthen stirring ability of vanadium extraction molten pool and promote vanadium extraction reaction, which will provide the theoretical support for the realization of high efficiency vanadium extraction by powder injection in converter.
|
|
Received: 30 March 2012
Published: 30 October 2012
|
|
|
|
|
|
| [1] |
LIANG Qiang, CAI Jun. Water modeling experimenton bottom lime injection base fluxes with oxygen into combined blown converter[J]. Iron and Steel, 2020, 55(5): 26-30. |
| [2] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
| [3] |
ZHOU Zhenyu, TANG Ping, ZHOU Zunchuan, HOU Zibing, WEN Guanghua. Optimization on nozzle parameters of 200 t combined blowing vanadium extraction converter[J]. Iron and Steel, 2019, 54(9): 50-56. |
| [4] |
CAI Jun1,ZENG Jiaqing1,LIANG Qiang1,HUANG Xiaoli2,ZHANG Bo1，ZHAO Bin1. Cold state simulation experiment on powder injection speed #br#
control of metallurgical dispenser[J]. Iron and Steel, 2019, 54(9): 57-61. |
| [5] |
ZHANG Shuo1,TANG Hai-yan1,LIU Jin-wen1,XIAO Hong1,2,YAO Hai-ying2,ZHANG Jia-quan1. Structural optimization of a sixstrand Htype channel induction heating tundish[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 787-794. |
| [6] |
Shi-Heng PENG. Effect of scrap on bath mixing for a BOF converter[J]. , 2019, 44(3): 0-0. |
|
|
|
|
2012, Vol. 47 
