|
|
Effect of Hot Rolling Parameters on Microstructure and Properties of Grain-Oriented Silicon Steel Produced by TSCR Process |
PEI Ying-hao1,XIANG Li2,SHI Li-fa1,WANG Li-tao1,CHEN Qi-an2 |
(1. Technical Center, Maanshan Iron and Steel Co., Ltd., Ma’anshan 243000, Anhui, China 2. National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract The texture and microstructure gradient in hot rolled grain oriented silicon steel strip was one of the essential factors to achieve a perfect secondary recrystallization. The texture and microstructure of grain oriented silicon steel strip as-rolled with two different hot rolling parameters was investigated. The results show that with big reduction at the end rolling process, the intensity of {100}〈011〉 and {100}〈001〉 orientation reduces with ({111}-{113})〈110〉 orientation intensity enhanced in hot band, meanwhile the average grain size and the thickness of recrystallization zone are increased, after high temperature annealing, the second grain size and the Goss grains orientation deviation angle is smaller, and the magnetic permeability is better.
|
Received: 07 May 2012
Published: 14 January 2013
|
|
|
|
|
[1] |
LI Zhao-zhen, SONG Xin-li, LIU Jing, CHENG Zhao-yang, BI Yun-jie, JIA Juan. Effect of Cr,Mn and annealing temperature on properties of non-oriented silicon steel[J]. Iron and Steel, 2020, 55(5): 80-86. |
[2] |
LIU Qing-song, PEI Ying-hao, SHI Li-fa, XIA Xue-lan, HE Zhi-jian, CHENG Guo-qing. Effect of annealing tension on magnetic anisotropy of Fe-3.0%Si non-oriented silicon steel[J]. Iron and Steel, 2020, 55(4): 95-99. |
[3] |
ZHU Cheng-yi1,2,HUANG Luo-yi1,2,LUO Xiao-yan1,2,LIU Yu-long1,2,WANG Yong1,2,LI Guang-qiang1,3. Effect of calcium treatment on characteristics of inclusions in finished non-oriented silicon steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 117-128. |
[4] |
ZHANG Jian-jun1,2, MAO Xin-ping 2, WANG Chun-feng3, ZHU Wan-jun2. Development and expection on high-efficiency producing technology of steelmaking in TSCR line[J]. Iron and Steel, 2019, 54(5): 1-8. |
[5] |
CHENG Lin,HU Zhi-yuan,PANG Wei-guang,ZHAO Xiao-dong,LIU gong-tao,SHI Ai-chen. Inclusions distribution in non-oriented silicon steel and its influence on performance consistency of strip steel[J]. , 2019, 44(1): 44-48. |
[6] |
XIA Tian,XIANG Zhi-dong,HE Zhu,HU Shou-tian,LUO Zhong-han. Numerical simulation and analysis of temperature field for annular furnace[J]. Iron and Steel, 2018, 53(9): 87-92. |
|
|
|
|